SDS Repository

sds

Collection
Permatex
Description
 
Tags
Search Tag
Filename
81950msds.pdf
Source
 
Full Text
Material Safety Data Sheet 1. PRODUCT IDENTIFICATION Product Name: ULTRA-SLICK ENGINE ASSEMBLY LUBE 40Z Item No: 81950 Product Type: Lubricant 2. COMPOSITION/INFORMATION ON INGREDIENTS Component Weight% ACGIH; TLV-TWA OSHA PEL RESIDUAL OILS (PETROLEUM), SOLVENT-DEWAXED 64742-62-7 85-95 Not listed Not listed 3. HAZARDS IDENTIFICATION Toxicity: May irritate the eyes. May cause skin irritation in sensitive individuals. Primary Routes of Entry: Eye and skin contact, ingestion, inhalation Signs and Symptoms of Exposure: Overexposure may cause eye and skin redness. Ingestion may cause nausea and vomiting. Aggravated Medical Condition: None known. 4. FIRST AID MEASURES Ingestion: If swallowed, DO NOT induce vomiting. Keep individual calm. Obtain medical attention. Inhalation: Move to fresh air in case of accidental inhalation of vapours. Skin Contact: Wash off with soap and water. If skin irritation persists, call a physician. Wash contaminated clothing before re-use. Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. 5. FIRE FIGHTING MEASURES Flash Point ?F(C?): 555?F COC Recommended Extinguishing Media: Carbon Dioxide, Dry Chemicals, Foam. Special Fire-Fighting Procedures: Treat as oil fire. Firefighters should wear self-contained breathing apparatus. Hazardous Products of Combustion: Oxides of carbon, Oxides of sulfur Unusual Fire/Explosion Hazards: None. Lower Explosive Limit: Not determined. Upper Explosive Limit: Not determined. 6. ACCIDENTAL RELEASE MEASURES Spill Procedures: Maintain good ventilation. Take up with an inert absorbent. Store in a closed waste container until disposal. Clean up spills thoroughly as residue is slippery. 7. HANDLING AND STORAGE Storage: Store in a cool, dry area. Handling: Avoid prolonged skin contact. Keep away from eyes. Wash hands before eating and smoking. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Eyes: Safety glasses. Skin: Neoprene or nitrile gloves recommended. Ventilation: General; local exhaust ventilation as necessary to control any air contaminants to within their exposure limits (or to the lowest feasible levels when limits have not been established) during the use of this product. Respiratory Protection: An approved organic vapor respirator should be worn when exposures are expected to exceed the applicable limits. 1 of 3 ITW Permatex 10 Columbus Blvd. Hartford, CT 06106 USA Telephone: 1-87-Permatex (877) 376-2839 Emergency: 800-255-3924 (ChemTel) International Emergency: 00+ 1+ 813-248-0585 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Red liquid Odor: Petroleum Odor Boiling Point: Not determined. pH: Does not apply Solubility in Water: Nil Specific Gravity: 0.92 VOC(Wt.%): None Vapor Pressure: Not Determined Vapor Density (Air=1): >1 Evaporation Rate: <1 (butyl acetate = 1) 10. STABILITY AND REACTIVITY Chemical Stability: Stable at normal conditions Hazardous Polymerization: Will not occur Incompatabilities: Strong oxidizers Conditions to Avoid: Welding Hazardous Products of Combustion: Oxides of carbon, Oxides of sulfur 11. TOXICOLOGICAL INFORMATION See Section 3 12. ECOLOGICAL INFORMATION No data available 13. DISPOSAL CONSIDERATIONS Recommended Method of Disposal: Disposal should be made in accordance with federal, state and local regulations. US EPA Waste Number: NH - Not a RCRA Hazardous Waste Material 14. TRANSPORTATION INFORMATION DOT (49CFR 172) U.S. Department of Transportation - DOT - 49 CFR (Ground) DOT Shipping Name: Not regulated Hazard Class: None UN/ID Number: None IATA (Air) Proper Shipping Name: Not regulated Class or Division: None UN/ID Number: None IMDG (Vessel) Proper Shipping Name: Not regulated Hazard Class: None UN Number: None Marine Pollutant: None 15. REGULATORY INFORMATION SARA 313 Chemicals: The following component(s) is listed as a SARA Section 313 Toxic Chemical. NONE California Proposition 65: No California Prop 65 chemicals are known to be present TSCA Inventory Status: All components of this product are listed (or exempt) on the EPA TSCA inventory. ULTRA-SLICK ENGINE ASSEMBLY LUBE 40Z Product Name: Item No. 81950 16. OTHER INFORMATION Estimated NFPA Rating: HEALTH 1, FLAMMABILITY 1 , REACTIVITY 0. Estimated HMIS Classification: HEALTH 1, FLAMMABILITY 1, PHYSICAL HAZARD 0 (NFPA is a registered trademark of the National Fire Protection Association) (HMIS is a registered trademark of the National Paint and Coatings Association) Item No. 81950 Company: ITW Permatex 10 Columbus Blvd. Hartford, CT USA 06106 ULTRA-SLICK ENGINE ASSEMBLY LUBE 40Z Revision Number: 6 Telephone No.: 1-87-Permatex (877) 376-2839 Prepared By: Denise Boyd, Manager-Environmental, Health & Safety Product Name: Revision Date: March 05, 2013