Material name: HM6239-F10 57112 Version #: 02 Revision date: 02-04-2014 Print date: 02-04-2014 MSDS US 1 / 4 ? MATERIAL SAFETY DATA SHEET 10?1019,?12377914???ACDelco?Hot?Melt?Adhesive?Sticks? ? 1. Product and Company Identification Product name HM6239-F10 MSDS name 7/16"X10"GLUESTICK/BOX/25L CAS # Mixture Product use Hot Melt Adhesive Generic description Polyamide Based Formulation Manufacturer Bostik, Inc. 11320 Watertown Plank Rd Wauwatosa, WI 53226 USA 24 hour emergency assistance Telephone: 1-800-227-0332 (Outside U.S.) 1-703-527-3887 General assistance Telephone: 1-800-843-0844 MSDS assistance Telephone: 1-800-843-0844 2. Hazards Identification Emergency overview Contact with this material can cause irritation to the skin, eyes and mucous membranes. Contact with molten material will cause thermal burns. Potential health effects Eyes HOT MOLTEN material can cause irreversible eye injury and burns. Contact with SOLID material may cause irritation with temporary redness with stinging and tearing. Skin When it is heated, this material may cause thermal burns. Inhalation Inhalation of mist causes irritation of respiratory system. Ingestion Ingestion causes irritation of upper respiratory system and gastrointestinal disturbance. Molten material will produce burns to the gastrointestinal tract. Fire and explosion This product will not ignite under normal situations but can be ignited in the extreme hea associated with a fire. Vapors are lighter than air and should rise, accumulating in overhangs and ceilings. In a fire situation, exposed containers may build up pressure and burst explosively spewing hot material. Irritating and potentially harmful vapors may be released in a fire or spill situation. 3. Composition / Information on Ingredients The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200. 4. First Aid Measures First aid procedures Eye contact If hot product contacts eye, flush with water for at least 15 minutes and seek medical attention immediately. Skin contact If hot product contacts skin, cool under running water and get medical attention. Cool melted product on skin with plenty of water. Do not remove solidified product. Inhalation Move to fresh air in case of accidental inhalation of vapours or decomposition products. If symptoms persist, get medical attention. Ingestion If ingested, get immediate medical attention. Do not induce vomiting unless instructed to do so by medical personnel. Never give anything by mouth to a victim who is unconscious or is having convulsions. 5. Fire Fighting Measures Hazardous combustion products Extinguishing media Suitable extinguishing media Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Dry chemical, CO2, water spray or regular foam. Avoid using a direct stream of water. A solid stream of water may scatter molten product. Material name: HM6239-F10 57112 Version #: 02 Revision date: 02-04-2014 Print date: 02-04-2014 MSDS US 2 / 4 ? Unsuitable extinguishing media Fire fighting equipment/instructions e Avoid using a direct stream of water. A solid stream of water may scatter molten product. Firefighters should wear full protective clothing including self contained breathing apparatus. Dust explosion hazard Static Discharge Hazard. Sensitivity to static discharge This product may retain a static electrical charge, which could produce a spark. Appropriate precautions should be taken prior to use. Unusual fire & explosion hazards Avoid using a direct stream of water. A solid stream of water may scatter molten product. Should a spark occur near flammable vapors, or airborne dust mixtures, an explosion could occur resulting in injury or death. Appropriate precautions should be taken prior to use. Flash point > 400 OF (> 204.4 OC) 6. Accidental Release Measures Emergency action Wear appropriate protective equipment and clothing during clean-up. Follow all Local, State, Federal and Provencial regulations for disposal. Containment procedures Isolate spill area. Stop discharge if safe to do so. Pellet or chip spill: Collect and contain for salvage or disposal. Molten adhesive spill: Placard hot material, allow to cool and remove. Collect and contain for salvage or disposal. Stop material from contaminating soil or from entering sewers or water streams. Reporting See Federal reporting requirements listed in Section 15. We recommend you contact local authorities to determine if there may be other local reporting requirements. 7. Handling and Storage For Commercial Use Only - Not Packaged or Labeled for Home Use! Handling Avoid contact with skin and eyes. Avoid contact with molten material. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use this product with adequate ventilation. Storage Keep the container tightly closed and dry. Empty container precaution Attention! Follow label warnings even after container is emptied since empty containers may retain product residues. Do not reuse empty container without professional cleaning for food, clothing, or products for human or animal consumption, or where skin contact can occur. 8. Exposure Controls / Personal Protection Engineering controls Ventilation should be sufficient to effectively remove and prevent buildup of any dusts or fumes that may be generated during handling or thermal processing. Personal protective equipment Eye protection Wear safety glasses; chemical goggles for fumes which may arise from thermal processing. Wear chemical goggles; face shield (if handling molten material). Skin and body protection Work clothing sufficient to prevent all skin contact should be worn, such as coveralls and long sleeves. For molten product, use any type rubber thermal insulating gloves and other clothing as necessary to protect from thermal burns. Respiratory protection When dusts or thermal processing fumes are generated and ventilation is not sufficient to effectively remove them, appropriate NIOSH/MSHA approved respiratory protection must be provided. General Eye wash fountain and emergency showers are recommended. 9. Physical & Chemical Properties Target solids 100 % pH N/A Density 0.96 g/cc Color Amber Physical state Solid Freeze protect No Material name: HM6239-F10 57112 Version #: 02 Revision date: 02-04-2014 Print date: 02-04-2014 MSDS US 3 / 4 ? 10. Chemical Stability & Reactivity Information Hazardous reactions/decomposition products Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Hazardous polymerization Will not occur. Conditions to avoid Do not add water or other volatile material to molten adhesive. Avoid excessive overheating. Avoid potential static charge. Stability Stable under normal conditions. This product may react with strong acids, bases and oxidizing agents. 11. Toxicological Information Carcinogenicity If this product contains any carcinogens, they will be noted below: 12. Ecological Information Bostik's hot melt adhesives are manufactured without the intentional use of volatile organic compounds and/or hazardous air pollutants regulated by the EPA in the Clean Air Act Amendment of 1990. Ecotoxicological information Water endangering class =1 (self classification) 13. Disposal Considerations It is the obligation of each user of the product mentioned herein to determine and comply with the requirements of all applicable local, state and federal regulations. Waste disposal Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. 14. Transport Information DOT Not regulated as hazardous goods. IATA Not regulated as hazardous goods. IMDG Not regulated as hazardous goods. 15. Regulatory Information This MSDS is prepared and distributed pursuant to the Federal Hazard Communication Standard, 29 CFR 1910.1200 Federal regulations All components are on the U.S. EPA TSCA Inventory List. State regulations If this product contains any California Proposition 65 chemicals at reportable levels they will be listed below: Restriction of Hazardous Substances (RoHS) The product(s) covered by this (M)SDS do not contain or are under the prescribed levels of prohibited substances listed under 2011/65/EU Hazardous Substances Restricted or Prohibited in Electrical Equipment, including lead (CAS # 7439-92-1), mercury (CAS # 7439-97-6), cadmium (CAS # 7440-43-9), hexavalent chromium (CAS # 7440-47-3), polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE). International regulations This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and contains all the information required by the Controlled Products Regulations. Material name: HM6239-F10 57112 Version #: 02 Revision date: 02-04-2014 Print date: 02-04-2014 MSDS US 4 / 4 ? Substances of Very High Concern (SVHC) The product(s) covered by this (M)SDS do not include any of the substances above a concentration of 0.1% weight by weight (w/w) in the Candidate List of Substances of Very High Concern (SVHC) for authorization published or proposed by ECHA on the following dates: - October 28, 2008 - August 31, 2009 - January 13, 2010 - March 8, 2010 - June 18, 2010 - October 14, 2010 - December 15, 2010 - June 20, 2011 - December 19, 2011 - February 17, 2012 - June 18, 2012 - December 19, 2012 - June 20, 2013 - December 16, 2013 HMIS Ratings Health: 1 Flammability: 1 Physical hazard: 0 Personal protection: X SARA 311/312 HAZARD CATEGORIES Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No WHMIS status Non-controlled 16. Other Information Disclaimer The data in this MSDS has been compiled from publicly available sources. This data relate only to the designated product and not to the use of said product in combination with other materials. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards which exist. Responsibility for proper precautions and safe use of the product lies with the user. All data in this MSDS is typical of the product as a whole, and does not represent any individual lot or batch, therefore, Bostik, Inc. makes no warranty about the accuracy of the data herein and assumes no liability for the use of such data. It is the responsibility of the user to comply with all applicable federal, state, and local laws and regulations. Issue date 02/04/2014 Prepared by Bostik, Inc. Regulatory Affairs Supercedes 12/06/2013 This data sheet contains changes from the previous version in section(s): Regulatory Information: Substances of Very High Concern (SVHC)