WARN Specified stream length 6928 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 28466 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 25203 is wrong. Fall back to reading stream until 'endstream'. WARN Did not found XRef object at specified startxref position 155081 WARN /Length of COSObject{5, 0} corrected from 3786 to 3837 WARN /Length of COSObject{10, 0} corrected from 7166 to 7262 WARN /Length of COSObject{11, 0} corrected from 338 to 344 WARN /Length of COSObject{15, 0} corrected from 4020 to 4074 WARN /Length of COSObject{17, 0} corrected from 7166 to 7262 WARN /Length of COSObject{20, 0} corrected from 3364 to 3410 WARN /Length of COSObject{22, 0} corrected from 7166 to 7262 WARN /Length of COSObject{25, 0} corrected from 3194 to 3237 WARN /Length of COSObject{27, 0} corrected from 7166 to 7262 WARN /Length of COSObject{30, 0} corrected from 2448 to 2482 WARN /Length of COSObject{35, 0} corrected from 3247 to 3291 WARN /Length of COSObject{32, 0} corrected from 7166 to 7262 WARN /Length of COSObject{37, 0} corrected from 7166 to 7262 WARN /Length of COSObject{42, 0} corrected from 7166 to 7262 WARN /Length of COSObject{40, 0} corrected from 1988 to 2016 WARN /Length of COSObject{47, 0} corrected from 7166 to 7262 WARN /Length of COSObject{45, 0} corrected from 1269 to 1287 WARN /Length of COSObject{50, 0} corrected from 275 to 280 WARN /Length of COSObject{55, 0} corrected from 670 to 680 WARN /Length of COSObject{60, 0} corrected from 615 to 625 OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 1 / FIR No.: 8 1. Product and Company Identification Product Name: Product Code: Application: Supplier: Emergency Telephone: Instant Gel Adhesive See Attachment Instant gel adhesive Ford Motor Company Attention: MSDS Information, P.O. Box 1899 Dearborn, Michigan 48121 1-800-392-3673 Poison Control Center: 1-800-959-3673 CHEMTREC: U.S. and Canada: 1-800-424-9300 CHEMTREC: International: 1-703-527-3887 Chemical Name CAS Number Percent Concentration Hazard Classification ETHYL CYANOACRYLATE SILICA, AMORPHOUS, FUMED, CRYSTALLINE FREE 7085-85-0 112945-52-5 60-100 1-5 ACGIH/OSHA DSL LISTED HAZCOM PEL/TLV-US DSL LISTED Health: Environment: Inhalation: This product is a liquid adhesive which bonds the skin rapidly and strongly. Flush the affected area with large amounts of water and obtain medical attention, if it is needed. This product is irritating to the eyes, respiratory system and skin. Inhalation of mist and vapors may irritate the nose, throat, and lungs. This product may cause burns. This product may cause an allergic skin reaction. This product may produce or aggravate asthmatic effects. Material contains a chemical which is a Hazardous Air Pollutant (HAP), regulated by the United States Clean Air Act. If gas/fume/vapor/dust/mist from the material is inhaled, remove the affected person immediately to fresh air. If irritation persists, get medical attention. 2. Composition/Information on Ingredients This chemical product is a preparation. 3. Hazards Identification 4. First-Aid Measures COMBUSTIBLE OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 2 / FIR No.: 8 Skin Contact: Eye Contact: Ingestion: Notes to a Physician: Extinguishing Media: Specific Hazards: Protection of Firefighters: Get medical attention immediately if the skin become bonded. MOUTH: If lips are accidentally stuck together, apply lots of warm water to the lips and encourage maximum wetting and pressure from saliva inside the mouth. Peel or roll lips apart. Do not try to pull the lips with direct opposing action. It is almost impossible to swallow cyanoacrylate. The adhesive solidifies and adheres in the mouth. Saliva will lift the adhesive in 1/2 to 2 days. In case a lump forms in the mouth, position the patient to prevent ingestion of the lump when it detaches. SKIN ADHESION: First immerse the bonded surfaces in warm soapy water. Peel or roll the surfaces apart with the aid of a blunt edge, eg. a spatula or a teaspoon handle; then remove adhesive from the skin with soap and water. Do not try to pull surfaces apart with a direct opposing action. EYELID TO EYELID OR EYEBALL ADHESION: In the event that eyelids are stuck together or bonded to the eyeball, wash thoroughly with warm water and apply a gauze patch. The eye will open without further action, typically in 1-4 days. There will be no residual damage. Do not try to open the eyes by manipulation. ADHESIVE ON THE EYEBALL: Cyano- acrylate introduced into the eyes will attach itself to the eye protein and will disassociate from it over intermittent periods, generally covering several hours. This will cause periods of weeping until clearance is achieved. During the period of contamination, double vision may be experienced together with a lachrymatory effect, and it is important to understand the cause and realize that disassociation will normally occur within a matter of hours, even with gross contamination. If the material is swallowed, get immediate medical attention or advice -- Do not induce vomiting. BURNS: Acrylates give off heat on solidification. In rare cases a large drop will increase in temperature enough to cause a burn. Burns should be treated normally after the lump of cyanoacrylate is released from the tissue as described above. SURGERY: It should never be necessary to use such a drastic method to separate accidentally bonded skin. Dry chemical, foam, carbon dioxide. Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Fire fighters should be equipped with NIOSH-approved, self-contained breathing apparatus (SCBA) and full protective clothing. 5. Fire-Fighting Measures OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 3 / FIR No.: 8 Personal Precautions: Environmental Precautions: Methods for Cleaning Up: Handling: Storage: Avoid inhalation of vapors and contact with skin and eyes. Provide adequate ventilation. Wear appropriate protective equipment and clothing during clean-up. Not applicable Absorb the spilled material with an inert absorbent (nonflammable) material. Provide ventilation to control vapor exposure within inhalation guidelines when handling at elevated temperatures. Avoid breathing vapor. Avoid getting this material into contact with your skin and eyes. Wear protective equipment during handling. No special precautions. Keep the container tightly closed and in a cool, well-ventilated place. Technical Measures: Precautions and Advice for Safe Handling: Technical Measures: Storage Conditions: 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Controls/Personal Protection Use adequate ventilation to control airborne concentrations below the exposure limits/guidelines. If user operations generate a vapor, dust, and/or mist, use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits/guidelines. Engineering Measures: Exposure Limits: Note 20 mppcf TWA, ((80)/(% SiO2) mg/m3 TWA) OSHA ETHYL CYANOACRYLATE SILICA, AMORPHOUS, FUMED, CRYSTALLINE FREE 0.2(ppm) Note 10 mg/m3 TWA (inhalable fraction) ACGIH ACGIH Chemical Name TWA NotesReferences OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 4 / FIR No.: 8 Wash thoroughly after handling. When using this material, do not eat, drink or smoke. Personal Protective Equipment: Hygiene Measures: If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4. The use of polyethylene gloves is recommended. Wear safety glasses with side shields. Use of an impervious apron is recommended. Respiratory Protection: Hand Protection: Eye Protection: Skin and Body Protection: 9. Physical and Chemical Properties 1.05 H2O=1 @4?C SOLID GEL IRRITATING CLEAR N.AP 85 ?C ASTM D56 1@20?C mmHg N.AV INSOLUBLE IN WATER N.AP N.AV Specific Gravity: Physical State: Form: Odor: Color: pH: Temperature Range During which Changes in Physical State Occur: Flash Point: Explosion Properties: Vapor Pressure: Vapor Density: Solubility: Viscosity: Evaporation Rate: >150 ?C N.AV N.AV Boiling Point: UEL: LEL: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 5 / FIR No.: 8 10. Stability and Reactivity 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations No specific aquatic data available for this product. This is a stable material. Hazardous polymerization can occur. Instability caused by excessive moisture. Hazardous polymerization can occur with contact with alkalies. Hazardous polymerization can occur with water, alcohol or amines. Carbon monoxide, carbon dioxide, and other low molecular weight hydrocarbons. Irritating and/or toxic fumes may be emitted upon the product's decomposition. Excessive inhalation of this material causes headache, dizziness, nausea and incoordination. Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulation. No consideration given when disposed of according to local, state, and Federal regulations. Stability: Conditions and Materials to Avoid: Hazardous Decomposition Products: Inhalation: Waste from Residues: Contaminated Packaging: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 6 / FIR No.: 8 14. Transport Information U.S. Department of Transportation (DOT) 49 - CFR 172.101 Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico) International and Domestic Air Transportation - ICAO & IATA Section 4.2 International Water Transportation - IMDG Code Amendment 31-02 This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product contains an ingredient(s) considered to be an environmental hazardous substance(s) by the State of New Jersey. This product contains an ingredients(s) considered to be a hazardous substance(s) by the State of New Jersey. This product contains NONE of the substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 The components of this product are listed on the TSCA Inventory Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material should be minimized to the greatest extent possible. 15. Regulatory Information 16. Other Information Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit 2 15 16 8 The following sections contain revisions OR NEW statements. HMIS and NFPA Hazard Class Information: HMIS Hazard Class: NFPA Hazard Class: Health: 2 (Moderate) Flammability: 2 (Moderate) Physical Hazard: 0 (Least) Health: 2 (Moderate) Flammability: 2 (Moderate) Instability: 1 (Slight) OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 7 / FIR No.: 8 The chemical identification and properties for this material were provided by the manufacturer. For Canadian locations, a manufacture's MSDS is available upon request. Health and safety information has been evaluated by the Occupational and Environmental Health Sciences Department, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. Preparation Information: Disclaimer: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 041245 US-US-5 Level: 2 Release Date: 2011-09-19 Page: 8 / FIR No.: 8 Product Code Container Size Part of Kit Kit Product Code TA-19 0.06 fl. oz. (1.8 mL) Attachment US-041245-US 1. Product and Company Identification 2. Composition/Information on Ingredients 3. Hazards Identification 4. First-Aid Measures 5. Fire-Fighting Measures 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Controls/Personal Protection 9. Physical and Chemical Properties 10. Stability and Reactivity 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 14. Transport Information 15. Regulatory Information 16. Other Information Attachment