WARN Specified stream length 6928 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 29028 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 25188 is wrong. Fall back to reading stream until 'endstream'. WARN Did not found XRef object at specified startxref position 155671 WARN /Length of COSObject{5, 0} corrected from 3674 to 3724 WARN /Length of COSObject{10, 0} corrected from 7166 to 7262 WARN /Length of COSObject{11, 0} corrected from 338 to 344 WARN /Length of COSObject{15, 0} corrected from 3126 to 3169 WARN /Length of COSObject{17, 0} corrected from 7166 to 7262 WARN /Length of COSObject{20, 0} corrected from 3474 to 3521 WARN /Length of COSObject{22, 0} corrected from 7166 to 7262 WARN /Length of COSObject{25, 0} corrected from 3064 to 3106 WARN /Length of COSObject{27, 0} corrected from 7166 to 7262 WARN /Length of COSObject{30, 0} corrected from 3303 to 3348 WARN /Length of COSObject{35, 0} corrected from 3323 to 3368 WARN /Length of COSObject{32, 0} corrected from 7166 to 7262 WARN /Length of COSObject{37, 0} corrected from 7166 to 7262 WARN /Length of COSObject{42, 0} corrected from 7166 to 7262 WARN /Length of COSObject{40, 0} corrected from 2069 to 2098 WARN /Length of COSObject{47, 0} corrected from 7166 to 7262 WARN /Length of COSObject{45, 0} corrected from 1279 to 1297 WARN /Length of COSObject{50, 0} corrected from 275 to 280 WARN /Length of COSObject{55, 0} corrected from 685 to 695 WARN /Length of COSObject{60, 0} corrected from 615 to 625 OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 1 / FIR No.: 8 1. Product and Company Identification Product Name: Product Code: Application: Supplier: Emergency Telephone: Threadlock and Sealer See Attachment Medium strength (blue) threadlocker Ford Motor Company Attention: MSDS Information, P.O. Box 1899 Dearborn, Michigan 48121 1-800-392-3673 Poison Control Center: 1-800-959-3673 CHEMTREC: U.S. and Canada: 1-800-424-9300 CHEMTREC: International: 1-703-527-3887 Chemical Name CAS Number Percent Concentration Hazard Classification CUMENE HYDROPEROXIDE 1,2-PROPYLENE GLYCOL TITANIUM DIOXIDE 80-15-9 57-55-6 13463-67-7 1-5 0.1-1 0.1-1 SARA 313 WHMIS 1 RSMS_D_ALL RQ DSL LISTED WHMIS 1 RSMS_D_ALL DSL LISTED IARC 2B (NA) RSMS_D_ALL PEL/TLV-US DSL LISTED ACGIH/OSHA Health: Physical and Chemical Hazards: This product may cause irritation to the eyes, respiratory system, and skin. This product may cause severe eye irritation. This product may cause an allergic skin reaction. This product may cause sensitization by inhalation and skin contact. Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea. This product may be absorbed through the skin in harmful amounts. Overexposure may cause central nervous system depression. This product is not combustible. 2. Composition/Information on Ingredients This chemical product is a preparation. 3. Hazards Identification CAUTION OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 2 / FIR No.: 8 Inhalation: Skin Contact: Eye Contact: Ingestion: Extinguishing Media: Specific Methods: Specific Hazards: Protection of Firefighters: Personal Precautions: Environmental Precautions: Methods for Cleaning Up: If gas/fume/vapor/dust/mist from the material is inhaled, remove the affected person immediately to fresh air. If irritation persists, get medical attention. For skin contact, wash immediately with soap and water. If irritation persists, get medical attention. In case of contact with eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention. If irritation persists, get medical attention. If the material is swallowed, get immediate medical attention or advice -- Do not induce vomiting. Dry chemical, foam, carbon dioxide, water fog. Use water to cool fire-exposed containers, structures, and to protect personnel. Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Due to pressure buildup, closed containers exposed to excess heat may explode. Fire fighters should be equipped with NIOSH-approved, self-contained breathing apparatus (SCBA) and full protective clothing. Avoid inhalation of vapors and contact with skin and eyes. Avoid skin contact with the spilled material. Provide adequate ventilation. Wear appropriate protective equipment and clothing during clean-up. No available information. Absorb the spilled material with an inert absorbent (nonflammable) material. 4. First-Aid Measures 5. Fire-Fighting Measures 6. Accidental Release Measures OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 3 / FIR No.: 8 Handling: Storage: Provide ventilation to control vapor exposure within inhalation guidelines when handling at elevated temperatures. Avoid breathing vapor, mist or gas. Avoid contact with skin, eyes and clothing. Keep the container closed when not in use. Wear protective equipment during handling. No special precautions. Store this product in a cool, dry, well-ventilated place. Technical Measures: Precautions and Advice for Safe Handling: Technical Measures: Storage Conditions: Use good personal hygiene. When using this material, do not eat, drink or smoke. Personal Protective Equipment: Hygiene Measures: If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4. The use of neoprene gloves is recommended. The use of nitrile gloves is recommended. Wear safety glasses with side shields. Wear protective clothing sufficient to cover exposed skin surfaces. Respiratory Protection: Hand Protection: Eye Protection: Skin and Body Protection: 7. Handling and Storage 8. Exposure Controls/Personal Protection Use general ventilation. Local exhaust is suggested for use, where possible, in enclosed or confined spaces. Engineering Measures: Exposure Limits: 15(mg/m3) OSHA TITANIUM DIOXIDE 10(mg/m3) ACGIH Chemical Name TWA References OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 4 / FIR No.: 8 9. Physical and Chemical Properties 10. Stability and Reactivity 1-1.15 H2O=1 @4?C LIQUID MILD BLUE N.AP >93 ?C ASTM D93 N.AV ND >1 (AIR=1) INSOLUBLE IN WATER N.AP ND Stable at ambient and moderately elevated temperatures and pressures. Hazardous polymerization can occur. This product may react with strong oxidizing agents (bleach--sodium hypochlorite, calcium hypochlorite, hydrogen peroxide, permanganate, nitric acid, concentrated OXYGEN, perchlorates). This product may react with reducing agents. Carbon monoxide, carbon dioxide, and other low molecular weight hydrocarbons. Specific Gravity: Physical State: Odor: Color: pH: Temperature Range During which Changes in Physical State Occur: Flash Point: Auto-ignition Temperature: Explosion Properties: Vapor Pressure: Vapor Density: Solubility: Viscosity: Evaporation Rate: Stability: Conditions and Materials to Avoid: Hazardous Decomposition Products: >148.89 ?C N.AV N.AP ND ND Boiling Point: Freezing Point: Melting Point: UEL: LEL: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 5 / FIR No.: 8 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 80-15-9 CUMENE HYDROPEROXIDE Oral, adult rat, LD50 = 382 mg/kg 80-15-9 CUMENE HYDROPEROXIDE Inhalation, adult rat, LC50 = 220 ppm (4 Hours) 80-15-9 CUMENE HYDROPEROXIDE Skin, adult rat, LD50 = 500 mg/kg No specific aquatic data available for this product. Excessive inhalation of this material causes headache, dizziness, nausea and incoordination. Prolonged and/or repeated skin contact with this product may cause irritation/dermatitis. The skin sensitization potential of this product has not been fully assessed, assume that contact with the skin may cause allergic contact dermatitis. Risks are higher where prolonged or repeated skin contact with a fluid may occur. Produces irritation to eyes, characterized by a burning sensation, redness, tearing, inflammation, and possible corneal injury. In a two year study, IARC indicates that lung tumors were observed in rats that had inhaled TITANIUM DIOXIDE dust at 250 mg/m3. This level is 25 times the current occupational exposure level (10 mg/m3) and is not expected to be attainable in the workplace. This product contains TITANIUM DIOXIDE. Animals inhaling massive quantities of TITANIUM DIOXIDE dust in a long term study developed lung tumors. Studies with humans involved in the manufacture of this pigment indicate no increased risk of cancer from exposure. Potential for inhaltion of TITANIUM DIOXIDE dusts from coatings is very limited. Since overexposures are not expected, there is no significant hazard for man. Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulation. No consideration given when disposed of according to local, state, and Federal regulations. Inhalation: Skin Contact: Eye Contact: Chronic (Long Term) Toxicity: Waste from Residues: Contaminated Packaging: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 6 / FIR No.: 8 14. Transport Information U.S. Department of Transportation (DOT) 49 - CFR 172.101 Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico) International and Domestic Air Transportation - ICAO & IATA Section 4.2 International Water Transportation - IMDG Code Amendment 31-02 This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. The components of this product are listed on the TSCA Inventory This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372. The above indicated hazardous ingredients (substances) are defined as hazardous by the Pennsylvania Worker and Community Right to Know Act. This product contains an ingredient(s) considered to be a "toxic or hazardous substance" by the Commonwealth of Massachussetts (Massachussetts Right to Know Law). This product contains an ingredient(s) considered to be an environmental hazardous substance(s) by the State of New Jersey. This product contains an ingredients(s) considered to be a hazardous substance(s) by the State of New Jersey. Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material should be minimized to the greatest extent possible. 15. Regulatory Information 16. Other Information Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit HMIS and NFPA Hazard Class Information: HMIS Hazard Class: NFPA Hazard Class: Health: 2 (Moderate) Flammability: 1 (Slight) Physical Hazard: 0 (Least) Health: 2 (Moderate) Flammability: 1 (Slight) Instability: 0 (Least) OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 7 / FIR No.: 8 8 6 15 2 7 10 3 3 4 4 The chemical identification and properties for this material were provided by the manufacturer. Health and safety information has been evaluated by the Occupational and Environmental Health Sciences Department, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. The following sections contain revisions OR NEW statements. Preparation Information: Disclaimer: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 003751 US-US-7 Level: 1 Release Date: 2013-09-16 Page: 8 / FIR No.: 8 Product Code Container Size Part of Kit Kit Product Code TA-25 0.2 fl. oz. (6 mL) Attachment US-003751-US 1. Product and Company Identification 2. Composition/Information on Ingredients 3. Hazards Identification 4. First-Aid Measures 5. Fire-Fighting Measures 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Controls/Personal Protection 9. Physical and Chemical Properties 10. Stability and Reactivity 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 14. Transport Information 15. Regulatory Information 16. Other Information Attachment