WARN Specified stream length 6928 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 28633 is wrong. Fall back to reading stream until 'endstream'. WARN Specified stream length 25198 is wrong. Fall back to reading stream until 'endstream'. WARN Did not found XRef object at specified startxref position 155087 WARN /Length of COSObject{5, 0} corrected from 3817 to 3869 WARN /Length of COSObject{10, 0} corrected from 7166 to 7262 WARN /Length of COSObject{11, 0} corrected from 338 to 344 WARN /Length of COSObject{15, 0} corrected from 3515 to 3563 WARN /Length of COSObject{17, 0} corrected from 7166 to 7262 WARN /Length of COSObject{20, 0} corrected from 3581 to 3630 WARN /Length of COSObject{22, 0} corrected from 7166 to 7262 WARN /Length of COSObject{25, 0} corrected from 2973 to 3014 WARN /Length of COSObject{27, 0} corrected from 7166 to 7262 WARN /Length of COSObject{30, 0} corrected from 2948 to 2988 WARN /Length of COSObject{35, 0} corrected from 3546 to 3594 WARN /Length of COSObject{32, 0} corrected from 7166 to 7262 WARN /Length of COSObject{37, 0} corrected from 7166 to 7262 WARN /Length of COSObject{42, 0} corrected from 7166 to 7262 WARN /Length of COSObject{40, 0} corrected from 1501 to 1522 WARN /Length of COSObject{47, 0} corrected from 7166 to 7262 WARN /Length of COSObject{45, 0} corrected from 1279 to 1297 WARN /Length of COSObject{50, 0} corrected from 275 to 280 WARN /Length of COSObject{55, 0} corrected from 670 to 680 WARN /Length of COSObject{60, 0} corrected from 615 to 625 OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 1 / FIR No.: 8 1. Product and Company Identification Product Name: Product Code: Application: Supplier: Emergency Telephone: Full Synthetic Manual Transmission Fluid See Attachment Manual Transmission Fluid Ford Motor Company Attention: MSDS Information, P.O. Box 1899 Dearborn, Michigan 48121 1-800-392-3673 Poison Control Center: 1-800-959-3673 CHEMTREC: U.S. and Canada: 1-800-424-9300 CHEMTREC: International: 1-703-527-3887 Chemical Name CAS Number Percent Concentration Hazard Classification HIGHLY REFINED BASE OIL PHOSPHORODITHIOIC ACID, O,O- DI-C1-14-ALKYL ESTERS, ZINC SALTS 68649-42-3 10-30 1-5 HAZCOM LOCAL REV 1 RSMS_METALS SARA 313 DSL LISTED MAN-ENV_REV Health: Environment: Inhalation: This product is irritating to the eyes and skin. Inhalation of vapors (generated at high temperatures only) may cause mild irri tation of the nose, throat, and respiratory tract. Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Prolonged or repeated contact with this product may dry and/or defat the skin. Material contains a chemical which is a Hazardous Air Pollutant (HAP), regulated by the United States Clean Air Act. If gas/fume/vapor/dust/mist from the material is inhaled, remove the affected person immediately to fresh air. If irritation persists, get medical attention. 2. Composition/Information on Ingredients This chemical product is a preparation. 3. Hazards Identification 4. First-Aid Measures CAUTION OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 2 / FIR No.: 8 Skin Contact: Eye Contact: Ingestion: Notes to a Physician: Extinguishing Media: Specific Methods: Specific Hazards: Protection of Firefighters: Personal Precautions: Environmental Precautions: Methods for Cleaning Up: For skin contact, wash immediately with soap and water. If irritation persists, get medical attention. In case of contact with eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention. If irritation persists, get medical attention. If the material is swallowed, get immediate medical attention or advice -- Do not induce vomiting. If the affected person is not breathing, apply artificial respiration. If the affected person's breathing is difficult, give oxygen. Use any media suitable for the surrounding fires. Dry chemical, foam, carbon dioxide, water fog. A solid stream of water may scatter molten product. Use water to cool fire-exposed containers, structures, and to protect personnel. Combustion may produce the following products: Oxides of carbon, nitrogen, and phosphorus. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Empty containers may retain product residue including Flammable or Explosive vapors. Do not cut, drill, grind, or weld near full, partially full, or empty product containers. Fire fighters should be equipped with NIOSH-approved, self-contained breathing apparatus (SCBA) and full protective clothing. Provide adequate ventilation. Avoid inhalation of vapors and contact with skin and eyes. Wear appropriate protective equipment and clothing during clean-up. Do not allow the spilled product to enter public drainage system or open water courses. Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb the spilled material and scrape it up. When product is used to mitigate a hazardous material, the resultant material must be handled in the same fashion as the hazardous material. 5. Fire-Fighting Measures 6. Accidental Release Measures OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 3 / FIR No.: 8 Handling: Storage: No special precautions necessary. Avoid contact with skin, eyes and clothing. Elevated temperature or mechanical action may form vapors, mist, or fumes which may be irritating to the eyes, nose, throat, and lungs. Avoid breathing vapors or mist. Use with adequate ventilation. No special precautions necessary. Avoid prolonged exposure of the container to direct sunlight. Keep the container tightly closed and in a cool, well-ventilated place. Technical Measures: Precautions and Advice for Safe Handling: Technical Measures: Storage Conditions: Personal Protective Equipment: If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4. The use of neoprene gloves is recommended. The use of nitrile-latex gloves is recommended. Wear safety glasses with side shields. Wear chemical goggles; face shield (if splashing is possible). Remove contaminated clothing and wash before reuse. Wear protective clothing sufficient to cover exposed skin surfaces. Respiratory Protection: Hand Protection: Eye Protection: Skin and Body Protection: 7. Handling and Storage 8. Exposure Controls/Personal Protection Use adequate ventilation to control airborne concentrations below the exposure limits/guidelines. If user operations generate a vapor, dust, and/or mist, use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits/guidelines. Eyewash and emergency showers are recommended. If oil mist is generated, observe the OSHA exposure limit of 5 mg/m3 (TWA) and the ACGIH exposure limit of 5 mg/m3 (TWA) and the ACGIH short term exposure limit (STEL) of 10 mg/m3. Ford Motor Company recommends an exposure limit of 1.0 mg/m3. Engineering Measures: Control Parameters: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 4 / FIR No.: 8 Wash thoroughly after handling. When using this material, do not eat, drink or smoke. Hygiene Measures: 9. Physical and Chemical Properties 10. Stability and Reactivity 0.872 H2O=1 @15?C LIQUID LIQUID OIL AMBER N.AP ASTM D1293 186 ?C COC N.AV INSOLUBLE IN WATER 76 cSt @40?C N.AV This is a stable material. Hazardous polymerization will not occur. This product can react with oxidizing materials. Carbon monoxide, carbon dioxide, and other low molecular weight hydrocarbons. Decomposition of this product may yield metallic oxides. Decomposition of this product may yield oxides of phosphorus. Specific Gravity: Physical State: Form: Odor: Color: pH: Temperature Range During which Changes in Physical State Occur: Flash Point: Auto-ignition Temperature: Explosion Properties: Solubility: Viscosity: Evaporation Rate: Stability: Conditions and Materials to Avoid: Hazardous Decomposition Products: N.AV N.AV N.AV Melting Point: UEL: LEL: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 5 / FIR No.: 8 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 122-62-3 2-ETHYLHEXYL SEBACATE Oral, adult rat, LD50 = 12800 mg/kg No specific aquatic data available for this product. Animal testing data indicate that the reproductive effect (Testicular Atropy) from exposure to ZINC DIALKYL DITHIOPHOSPHATE is a non-specific chemical effect and is caused by stressing the animals due to severe skin irritation and weight loss. In some laboratory animal studies ZINC DIALKYL DITHIOPHOSPHATE compounds are suspect of mutagenic effects. Base oil severely refined: Not carcinogenic in animal studies. Representative material passes IP-346, Modified Ames test, and/or other screening tests. No definitive information available on carcinogenicity, mutagencity, target organs, or developmental toxicity Bioaccumulation is unlikely to be significant because of the low water solubility of this product. The product is biodegradable. The product contains zinc compounds which are estimated to be very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulation. No consideration given when disposed of according to local, state, and Federal regulations. Chronic (Long Term) Toxicity: Mobility: Persistence/Degradability: Ecotoxocity: Waste from Residues: Contaminated Packaging: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 6 / FIR No.: 8 14. Transport Information U.S. Department of Transportation (DOT) 49 - CFR 172.101 Canadian Transportation of Dangerous Goods (T.D.G.) - TDGR Schedule II Secretary of Communication and Transportation (SCT) - NOM-002-SCT2/1994 (Mexico) International and Domestic Air Transportation - ICAO & IATA Section 4.2 International Water Transportation - IMDG Code Amendment 31-02 This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product is not regulated as a dangerous good. This product contains a toxic chemical or chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372. The components of this product are listed on the TSCA Inventory Material contains a chemical which is a Ford Motor Company Material of Concern. Use and release of this material should be minimized to the greatest extent possible. 15. Regulatory Information 16. Other Information Key/Legend: N.AP = Not applicable; N.AV = Not available; ND = Not determined or No data; TLV = Threshold limit value; TWA = Time-weighted average; STEL = Short-term exposure limit; C = Ceiling limit 2 15 16 The chemical identification and properties for this material were provided by the manufacturer. For Canadian locations, a manufacture's MSDS is available upon request. Health and safety information has been evaluated by the Occupational and Environmental Health Sciences Department, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA. The following sections contain revisions OR NEW statements. Preparation Information: HMIS and NFPA Hazard Class Information: HMIS Hazard Class: NFPA Hazard Class: Health: 1 (Slight) Flammability: 1 (Slight) Physical Hazard: 0 (Least) Health: 1 (Slight) Flammability: 1 (Slight) Instability: 0 (Least) OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 7 / FIR No.: 8 The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. Disclaimer: OO Owner: Ford Motor Company PRINTED DOCUMENT IS TRANSIENT Application: MATS Ford Proprietary Official Record Material Safety Data Sheet Version Number: 175246 US-US-4 Level: 1 Release Date: 2011-08-02 Page: 8 / FIR No.: 8 Product Code Container Size Part of Kit Kit Product Code XT-M5-QS 1 qt. (946 mL) Attachment US-175246-US 1. Product and Company Identification 2. Composition/Information on Ingredients 3. Hazards Identification 4. First-Aid Measures 5. Fire-Fighting Measures 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Controls/Personal Protection 9. Physical and Chemical Properties 10. Stability and Reactivity 11. Toxicological Information 12. Ecological Information 13. Disposal Considerations 14. Transport Information 15. Regulatory Information 16. Other Information Attachment