SAFETY DATA SHEET 1. Identification Product identifier SAE 80W-90 Premium Rear Axle Lubricant Other means of identification FIR No. 173576 Recommended use Rear axle lubricant Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Supplier Company Name Ford Motor Company Address Attention: MSDS Information, P.O. Box 1899 Dearborn, Michigan 48121 USA Telephone 1-800-392-3673 MSDS Information 1-800-448-2063 This email address is being protected from spambots. You need JavaScript enabled to view it. Emergency telephone numbers Poison Control Center: USA and Canada: 1-800-959-3673 INFOTRAC (Transportation): USA and Canada 1-800-535-5053 2. Hazard(s) identification Not classified.Physical hazards Not classified.Health hazards Category 2Hazardous to the aquatic environment, long-term hazard Environmental hazards Not classified.OSHA defined hazards Label elements Signal word None. Hazard statement Toxic to aquatic life with long lasting effects. Precautionary statement Prevention Avoid release to the environment. Response Collect spillage. Storage Store away from incompatible materials. Disposal Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise classified (HNOC) May irritate eyes and skin. May cause irritation of respiratory tract. Supplemental information None. 3. Composition/information on ingredients Mixtures CAS number %Chemical name Common name and synonyms Trade SecretOleylamine < 1 Specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret. FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 1 / 6 4. First-aid measures Inhalation Move to fresh air. Call a physician if symptoms develop or persist. Skin contact Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation develops and persists. Eye contact Rinse with water. Get medical attention if irritation develops and persists. Ingestion Rinse mouth. Get medical attention if symptoms occur. If ingestion of a large amount does occur, call a poison control center immediately. Most important symptoms/effects, acute and delayed Direct contact with eyes may cause temporary irritation. Indication of immediate medical attention and special treatment needed Treat symptomatically. General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. 5. Fire-fighting measures Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Unsuitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire. Specific hazards arising from the chemical During fire, gases hazardous to health may be formed. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Special protective equipment and precautions for firefighters Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Fire fighting equipment/instructions Move containers from fire area if you can do so without risk. Specific methods Use standard firefighting procedures and consider the hazards of other involved materials. General fire hazards No unusual fire or explosion hazards noted. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Avoid contact with eyes, skin, and clothing. Avoid inhalation of vapors or mists. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Methods and materials for containment and cleaning up This product is miscible in water. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Prevent product from entering drains. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Environmental precautions Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground. Inform appropriate managerial or supervisory personnel of all environmental releases. 7. Handling and storage Precautions for safe handling Provide adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing mist or vapor. Avoid prolonged exposure. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices. See Section 8 of the SDS for Personal Protective Equipment. Conditions for safe storage, including any incompatibilities Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). 8. Exposure controls/personal protection Occupational exposure limits No exposure limits noted for ingredient(s). Biological limit values No biological exposure limits noted for the ingredient(s). FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 2 / 6 Appropriate engineering controls Use adequate ventilation to control airborne concentrations below the exposure limits/guidelines. If user operations generate a vapor, dust and/or mist, use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits/guidelines. Individual protection measures, such as personal protective equipment Eye/face protection Wear safety glasses with side shields (or goggles). Skin protection Hand protection Suitable chemical protective gloves should be worn when the potential exists for prolonged or repeated skin exposure. The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Nitrile gloves are recommended. Other Wear suitable protective clothing. Wear appropriate chemical resistant clothing if applicable. Respiratory protection If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4. Thermal hazards Wear appropriate thermal protective clothing, when necessary. General hygiene considerations Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 9. Physical and chemical properties Appearance Physical state Liquid. Form Lubricant. Color Amber. Odor Hydrocarbon-like. Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point >= 302.0 ?F (>= 150.0 ?C) ASTM D93 Evaporation rate Not available. Flammability (solid, gas) Not applicable. Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Explosive limit - lower (%) Not available. Explosive limit - upper (%) Not available. Vapor pressure < 1 mm Hg Vapor pressure temp. 68 ?F (20 ?C) Vapor density > 1 (AIR=1) Relative density 0.88 - 0.89 Relative density temperature 60.08 ?F (15.6 ?C) Solubility(ies) Solubility (water) NEGLIGIBLE Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature Not available. Decomposition temperature Not available. Viscosity Not available. FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 3 / 6 Other information Kinematic viscosity 132 - 146 cSt ASTM D445 Kinematic viscosity temperature 104 ?F (40 ?C) 10. Stability and reactivity Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Chemical stability Material is stable under normal conditions. Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. Conditions to avoid Contact with incompatible materials. Incompatible materials Strong oxidizing agents. Strong reducing agents. Hazardous decomposition products Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of phosphorus. Sulfur oxides. Nitrogen oxides (NOx). 11. Toxicological information Information on likely routes of exposure Inhalation May cause irritation to the respiratory system. Prolonged inhalation may be harmful. Skin contact Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Not available. Skin corrosion/irritation Prolonged skin contact may cause temporary irritation. Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation. Respiratory or skin sensitization Respiratory sensitization Not a respiratory sensitizer. Skin sensitization This product is not expected to cause skin sensitization. Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. Base oil severely refined: Not carcinogenic in animal studies. Representative material passes IP-346, Modified Ames test, and/or other screening tests. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. Reproductive toxicity This product is not expected to cause reproductive or developmental effects. Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not an aspiration hazard. Chronic effects Prolonged inhalation may be harmful. 12. Ecological information Ecotoxicity Toxic to aquatic life with long lasting effects. Persistence and degradability No data is available on the degradability of this product. Bioaccumulative potential Mobility in soil No data available. FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 4 / 6 Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations Disposal instructions Don't pollute. Conserve resources. Return used oil to collection centers. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations. Local disposal regulations Dispose in accordance with all applicable regulations. Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Waste from residues / unused products Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. Not established.Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance Not listed. SARA 311/312 Hazardous chemical No SARA 313 (TRI reporting) Not regulated. FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 5 / 6 Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Safe Drinking Water Act (SDWA) Not regulated. US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. Massachusetts RTK - Substance List Not regulated. US. New Jersey Worker and Community Right-to-Know Act Not listed. US. Pennsylvania Worker and Community Right-to-Know Law Not listed. US. Rhode Island RTK Not regulated. US. California Proposition 65 WARNING: This product contains a chemical known to the State of California to cause cancer. International Inventories All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. 16. Other information, including date of preparation or last revision Issue date 09-21-2015 Version # 01 HMIS? ratings Health: 1 Flammability: 1 Physical hazard: 0 NFPA ratings Health: 0 Flammability: 1 Instability: 0 Preparation Information and Disclaimer This document was prepared by FCSD-Toxicology, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA, based in part on information provided by the manufacturer. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. To the extent that there are any differences between this product?s Safety Data Sheet (SDS) and the consumer packaged product labels, the SDS should be followed. Part number(s) XY-80W90-KL, XY-80W90-QL FIR No.: 173576 SDS US Issue Date: 09-21-2015 Version: 01 6 / 6