SDS Repository

sds

Collection
Tech Chem/Johnsens
Description
 
Tags
Search Tag
Filename
6330_msds.pdf
Source
 
Full Text
MATERIAL SAFETY DATA SHEET Trade Name: Johnsens 134a Refrigerant MSDS NO. 6330 Revision Date: NOT AUTHORIZED Date Printed 10/14/2009 Page 1 of 4 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Trade Name: Johnsens 134a Refrigerant Chemical Family: Refrigerant Gas Synonyms: None Emergency Telephone (24 hr.): CHEMTREC 1-800-424-9300 Supplier: Technical Chemical Company, P.O. Box 139, Cleburne, Texas 76033 2. COMPOSITION/INFORMATION ON INGREDIENTS Component Weight % OSHA TWA OSHA STEL OSHA SKIN 1,1,1,2-Tetrafluoroethane 811-97-2 98-100 Not Listed Not Listed Not Listed Component Weight % OSHA Z PEL OSHA Z TWA OSHA Z Ceiling 1,1,1,2-Tetrafluoroethane 811-97-2 98-100 Not Listed Not Listed Not Listed Component ACGIH TLV TWA ACGIH TLV STEL ACGIH TLV Ceiling 1,1,1,2-Tetrafluoroethane 811-97-2 Not Listed Not Listed Not Listed Other: Contains no other ingredients in concentrations >.1% that are now known to be hazardous as defined by OSHA. 3. HAZARDS IDENTIFICATION Emergency Overview: Content under pressure. "Frostbite-like" effects may occur if the liquid or escaping vapors contact the eyes or skin. May decompose on contact with flames or extremely hot metal surfaces to produce toxic and corrosive products. Gross inhalation overexposure may cause heart irregularities, unconsciousness or death. Vapor reduces oxygen available for breathing and is heavier than air. Workers with heart disease or compromised heart function should limit exposure to this material. Keep away from heat, sparks and flame. HMIS Classification: Health: 1 Flammability: 1 Reactivity: 0 NFPA Rating: Health: 2 Flammability: 1 Reactivity: 0 4. FIRST AID MEASURES Eye Contact: In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention immediately after flushing. In case of frostbite, water should be lukewarm, lifting eyelids occasionaly to facilitate irrigation Ingestion: Not applicable - product is a gas at ambient temperatures. Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration, preferably mouth-to-mouth. If breathing is difficult give oxygen. Get medical attention. Do not give adrenaline, epinephrin or similar drugs following exposure to this product. Skin Contact: For exposure to liquid, immediately warm frostbite area with warm water (not to exceed 105'f). In case of massive exposure, remove clothing while showering with warm water. Get medical attention. Irritation may result from a defatting action on tissue 5. FIRE FIGHTING MEASURES Flammable Properties Flash Point ?F(?C): NA - Gas Flash Point Method: Not Applicable Flammable Limits in Air - Lower (%): Not Applicable Flammable Limits in Air - Upper (%): Not Applicable MATERIAL SAFETY DATA SHEET Trade Name: Johnsens 134a Refrigerant MSDS NO. 6330 Revision Date: NOT AUTHORIZED Date Printed 10/14/2009 Page 2 of 4 5. FIRE FIGHTING MEASURES Autoignition Temperature ?F(?C): 1369 F (743 C) Extinguishing Media: Use water spray to keep containers cool that are exposed to heat or flames. Use extinguishing media appropriate for surrounding fire. Protection Of Fire-Fighters: Special Fire-Fighting Procedures: Warning!! Contents under pressure. Container may rupture under fire conditions. Decomposition may occur. Wear approved positive-pressure self-contained breathing apparatus and protective clothing. Hazardous Combustion Products: May decompose on contact with flames or extremely hot metal surfaces to produce toxic and corrosive products. Liquid and gas under pressure, overheating or overpressurizing may cause gas release and/or violent cylinder bursting. Container may explode if heated due to resulting pressure rise. Some mixtures of HFCDs and/or HFCs, and air or oxygen may be combustible if pressurized and exposed to extreme heat or flame. Aerosol Comments: NFPA Level 1 Aerosol 6. ACCIDENTAL RELEASE MEASURES Personal Precautions: Wear appropriate protective clothing and equipment to prevent skin and eye contact. Avoid breathing vapor. When airborne exposure limits are exceeded use NIOSH approved respiratory protection equipment appropriate to the material and/or its components. Spill Procedures: Wear protective equipment specified. Avoid all sources of ignition; heat, sparks and open flames. Use Halogen leak detector or other suitable means to locate leaks or check atmosphere. Keep upwind. Evacuate enclosed spaces and disperse gas with floor-level forced-air ventilation. Exhaust vapors outdoors. Do not smoke or operate internal combustoin engines. Evacuate unprotected personnel Action to be taken if material is released or spilled: Increase area ventilation. Do not puncture or incinerate container. Contents under pressure. Environmental Precautions: Do not allow entry to the atmosphere. Recover, reclaim or recycle when practical. 7. HANDLING AND STORAGE Handling and Storage: CAUTION: COMPRESSED GAS. Do not puncutre, incinerate or store above 120 F. Do not store in passenger compartment of automobile. Avoid breathing vapors, if exposed to high vapor concentration, leave area at once. Avoid contact with skin and eyes. Should not be mixed with air for leak testing or used for any other purpose above atmospheric pressure. Use only in a well ventilated area. Do not reuse this container. Keep away from heat and open flame. Protect from light and heat 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Local exhaust ventilation as necessary to maintain exposures to within applicable limits. Showers. Eyewash stations. Eyes: Chemical goggles; also wear a face shield if splashing hazard exists. Skin Protection: Avoid skin contact. Wear protective clothing and gloves. Respiratory Protection: An approved respirator (i.e. NIOSH, etc.) should be worn when exposures are expected to exceed the applicable limits. Use in a well ventilated area. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Clear, colorless liquid and vapor Odor: MILD ETHER LIKE pH Value: Not Determined Vapor Pressure: .665 MPa (6.66 bar) (25C) Vapor Density (Air=1): 3.25 Boiling Point (?F): -15.5 F (-26.4 C) Melting/Freezing Point: -160 C (Freezing Point) Solubility in Water: .9 g/l @ 25 C. Bulk Density at 20?C: 1.21 @ 25 C (g/cm3) Molecular Weight: 102.03 Specific Gravity (H20=1): 1.21 @ 4 C. Viscosity: Not determined. Evaporation Rate: Not Determined VOC Content(%): Not determined. Decomposition Temperature: >698 F (>370 C) MATERIAL SAFETY DATA SHEET Trade Name: Johnsens 134a Refrigerant MSDS NO. 6330 Revision Date: NOT AUTHORIZED Date Printed 10/14/2009 Page 3 of 4 10. STABILITY AND REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Conditions to Avoid: Do not expose to heat or store at temperatures above 120 F. Keep away from heat,sparks and flame. Materials to Avoid: Avoid contact with alkali or alkaline earth metals. Avoid finely powdered metals such as aluminum, magnesium or zinc. Strong oxidizers. Hazardous Decomposition Products: Thermal decompositoin products include hydrogen fluoride, hydrogen chloride, carbon monoxide, carbon dioxide and chlorine. Hazardous Polymerization: WILL NOT OCCUR 11. TOXICOLOGICAL INFORMATION Toxicological Data: Component Route Species Dose 1,1,1,2-Tetrafluoroethane 811-97-2 Inhalation Rats LC50 1500 gm/m3/4H Carcinogenicity: Component IARC NTP OSHA 1,1,1,2-Tetrafluoroethane 811-97-2 Not Listed Not Listed Not Listed 12. ECOLOGICAL INFORMATION Remarks: Aquatic Toxicity: 48 hour EC50 - Daphnia magna: 980 mg/L, 96 hour LC50 - Rainbow trout: 450 mg/L 13. DISPOSAL CONSIDERATION Waste Classification: Not determined. Waste Management: Not determined. Disposal Method: Disposal should be made in accordance with federal, state and local regulations. Recover, reclaim or recycle when practical. 14. TRANSPORTATION INFORMATION U.S. DOT: Proper Shipping Name: 1,1,1,2-Tetrafluoroethane Hazard Class: 2.2 UN/NA Number: UN 3159 DOT Packing Group: Not Applicable IMDG: Proper Shipping Name: 1,1,1,2-Tetrafluoroethane Hazard Class: 2.2 Hazard Subclass: Not Applicable UN No.: UN 3159 Packing Group: Not Applicable Marine Pollutant: No 15. REGULATORY INFORMATION US Federal Regulations: Component SARA 313 SARA 302 TPQ RQ 1,1,1,2-Tetrafluoroethane 811-97-2 Not Listed Not Listed Not Listed Not Listed MATERIAL SAFETY DATA SHEET Trade Name: Johnsens 134a Refrigerant MSDS NO. 6330 Revision Date: NOT AUTHORIZED Date Printed 10/14/2009 Page 4 of 4 SARA 311/312 Hazard Catagories: Acute, Chronic, Pressure State Regulations: Component California Prop. 65 Cancer list California - Prop 65 Developmental Toxicity California Prop. 65 Reproductive Female California Prop. 65 Reproductive Male 1,1,1,2-Tetrafluoroethane 811-97-2 Not Listed Not Listed Not Listed Not Listed U.S. TSCA: The components of this product are listed on the TSCA Inventory. Canadian Inventory: The components of this product are listed on the Canadian DSL or NDSL Inventory. Consumer Product Safety Improvement Act of 2008 General Conformity Certification The Supplier identified in Section 1 of this MSDS has evaluated this product and certifies it to be labeled and packaged in compliance with the applicable provisions of the Federal Hazardous Substance Act as stated in 16 CFR 1500 and enforced by the Consumer Product Safety Commission, and where applicable the products that require Child Resistant Closures are packaged in accordance with the Poison Prevention Packaging Act as stated in 16 CFR 1700 and enforced by the Consumer Product Safety Commission. All closures have been tested in accordance with the latest protocols. No other testing is required to certify compliance with the above. The date of manufacture is stamped on the product container. 16. OTHER INFORMATION General Notes: Do not allow undiluted material or large quantities to reach groundwater, bodies of water or sewer system. Disclaimer: The information and recommendations contained herein are based upon tests believed to be reliable. However, the manufacturer/distributor of this product does not guarantee their accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage may be required. The manufacturer/distributor assumes no responsibility for results obtained or for incidental or consequential damages, including lost profits, arising from the use of these data. No warranty against infringement of any patent, copyright or trademark is made or implied.