SDS Repository

sds

Collection
Universal Power Group
Description
 
Tags
Search Tag
Filename
Dry_Charged_battery_UPG.pdf
Source
 
Full Text
1 SAFETY DATA SHEET Revision Date: Jan 15th, 2015 SECTION 1 IDENTIFICATION Product Identifier: Conventional flooded battery Other Product Name: Dry charged, lead-acid battery Relevant Identified Uses: Power Sport Batteries Uses Advised Against: Any Other Not Listed Above Supplier : Manufactured for Universal Power Group, Inc. Address: 488 S Royal Lane, Coppell, TX 75019 Emergency Telephone Number: SECTION 2: HAZARDOUS IDENTIFICATION Classification of the substance or mixture: Classification according to Regulation (EC) No 1272/2008 [CLP/GHS]. Class 13: Non-flammable solids in non-flammable package. Classification according to 67/548/EEC or 1999/45/EC. Xi: Irritating Label elements: Labeling according to Regulation (EC) No 1272/2008. Product identifier: Dry Charge Battery. Hazard pictograms: t US/CAN: 1-800-424-9300 Countries outside of US/CAN: 1-703-527-3887 Websi e: www.upgi.com 2 Xi: Irritating NFPA: WHMIS: Not Regulated Signal word: CAUTION Hazard statements: May be harmful in contact with skin. Causes skin irritation. May cause respiratory irritation. Warning! Contains lead. Precautionary statements: Keep out of reach of children. Keep containers tightly closed. Keep away from heat, sparks, and open flame while charging batteries. Other hazards: Adverse human health effects and symptoms: Inhalation: (Acute): Under normal conditions of use, no health effects are expected. (Chronic): Repeated and prolonged exposure may cause irritation. Skin: (Acute): Under normal conditions of use, no health effects are expected. (Chronic): No data available. Eye: (Acute): Under normal conditions of use, no health effects are expected. Exposure to dust may cause irritation. (Chronic): No data available. Ingestion: (Acute): Under normal conditions of use, no health effects are expected. Lead ingestion may cause abdominal pain, nausea, vomiting, diarrhea and severe cramping. (Chronic): No data available. Carcinogenic Effects: Material is an article. No health effects are expected related to normal use of this product as sold. Material does contain components that exhibit carcinogenic effects. 3 SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Description of the mixture: CAS No EC No % [weight] Name WHMISClassifications Classification according to CLP (1272/2008) 7439-92-1 231-100-4 80-92% Lead D2A Xn, N, T; R20/22, R33, R50, R50/53, R53, R61, R62; Repr. Cat. 1, Repr. Cat. 3; S53, S45, S60, 231-100-4 S61 except those specified elsewhere in the annex 7440-36-0 231-146-5 0-1% Antimony Uncontrolled product according to WHMIS classification criteria; D1B(powder) Xn, N; R20/22, R51/53; S2, S61 except tetroxide, pentoxide, trisulphide, pentasulphide, and those specified elsewhere in the annex 7440-31-5 231-141-8 0-0.1% Tin Uncontrolled product according to WHMIS classification criteria Not Listed 7440-38-2 231-148-6 0-0.1% Arsenic D1A, D2A T, N; R23/25, R50/53; S1/2, S20/21, S28, S45, S60, S61 7440-70-2 231-179-5 0-0.1% Calcium B6, E F; R15; S2, S8, S24/25,S43 Case material composes 5-6% of the article. Case material includes the following components: 1- Propene,homopolymer (9003-07-0); Polystyrene (9003-53-6); Acrylonitrile, polymer with styrene (9003- 54-7); Acrylonitrile,polymer with 1,3-butadiene and styrene (9003-56-9); Styrene polymer with 1,3- butadiene and styrene (9003-56-9);Styrene polymer with 1,3-butadine (Kraton) (9003-55-8); Ethylene, chloro-, polymer (9003-86-2); Hard Rubber;Polycarbonate; Polyethylene. SECTION 4: FIRST AID MEASURES Eye Contact: First aid is not expected to be necessary if material is used under ordinary conditions and as recommended. If contact with material occurs flush eyes with water. If signs/symptoms develop, get medical attention Skin Contact: First aid is not expected to be necessary if material is used under ordinary conditions and as recommended. Wash skin with soap and water. If signs/symptoms develop, get medical 4 attention. Ingestion: First aid is not expected to be necessary if material is used under ordinary conditions and as recommended. If ingested consult physician immediately. Inhalation: First aid is not expected to be necessary if material is used under ordinary conditions and as recommended. If signs/symptoms develop, move person to fresh air.. Self-protection of the first aider: If artificial respiration,is required use a pocket mask equipped with a one-way valve or other proper respiratory medical device. SECTION 5: FIRE-FIGHTING MEASURES Suitable Extinguishing Media: CO2, dry chemical or foam. Unsuitable Extinguishing Media: Avoid using water. Special Hazards Arising from the Substance or Mixture: Hazardous Combustion Products:Lead portion of battery will likely produce toxic metal fume, vapor or dust. Advice for Fire-fighters: Keep sparks or other sources of ignition away from batteries. Do not allow metallic materials to simultaneously contact negative and positive terminals of cells and batteries. Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters? protective clothing will only provide limited protection. Additional Information: Material itself is non-combustible although in fire situations will likely produce toxic metal fume, vapor or dust. SECTION 6: ACCIDENTAL RELEASE MEASURES Personal Precautions: Protective equipment and emergency procedures. No special precautions expected to be necessary if material is used under ordinary conditions and as recommended. Avoid contact of lead with skin. For non-emergency personnel :Protective equipment: Wear chemical gloves. For emergency responders No emergency procedures are expected to be necessary if material is used under ordinary conditions as recommended. Use normal clean up procedures. Personal protective equipment: Wear chemical gloves, goggles, acid resistant clothing and boots, respirator if insufficient ventilation. Environmental Precautions: Prevent entry into waterways, sewers, basements or confined areas. Runoff from fire control and dilution water may be toxic and corrosive and may cause adverse environmental impacts. 5 Methods and material for containment and cleaning up For containment: Lead dust should be vacuumed or wet swept into a D.O.T. approved container. Use controls that minimize fugitive emissions. Do not use compressed air. For cleaning up: Contact local and/or state officials for proper disposal requirements. SECTION 7: HANDLING & STORAGE Precautions for safe handling: Handle batteries cautiously. Do not tip to avoid spills (if filled with electrolyte). Avoid contact with internal components. Wear protective clothing when filling or handling batteries. Follow manufacturer?s instructions for installation and service. Do not allow conductive material to touch the battery terminals. Short circuit may occur and cause battery failure and fire. Advice on general occupational hygiene?Wash thoroughly with soap and water after handling and before eating, drinking, or using tobacco. Eyewash stations and safety showers should be provided with unlimited water supply. Handle in accordance with good industrial hygiene and safety practice. Conditions for safe storage, including any incompatibilities: Avoid contact with strong bases, acids, combustible organic materials, halides, halogenates, potassium nitrate, permanganate, peroxides, nascent hydrogen, reducing agents and water. Technical measures and storage conditions: Store in a cool/low-temperature, well-ventilated place away from heat and ignition sources. Batteries should be stored under roof for protection against adverse weather conditions. Place cardboard between layers of stacked batteries to avoid damage and short circuits. Store batteries on an impervious surface. Storage class: Class 13: Non-flammable solids in non-flammable package. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Occupational exposure limits: Limit value type (country of origin) Substance name EC-No. CAS-No Limit value Monitoring and observation processes TWA(ACGIH USA) Arsenic 7440-38-2 0.01 mg/m3 STEL (CA-ON) 50 ?g/m3 Designated substance TWA (CA-ON) 10 ?g/m3 regulation TWA (CA-QU) 1.1 mg/m3 6 STEL (CH) 1.2 mg/m3 TWA (CH) 0.01 mg/m3 TWA (FI) 0.01 mg/m3 TWA (FI) Medium: Urine Time: end of shift at end of workweek Biological Limit Value (FI) 70 nmol/L TWA (ME) 1.1 mg/m3 Ceiling (NIOSH) 1.2 mg/m3 TWA(ACGIH USA) Tin 231-141-8 7440-31-5 2 mg/m3 TWA (CA) 2 mg/m3 TWA (FI) 2 mg/m3 STEL(ME) 4 mg/m3 TWA (ME) 2 mg/m3 TWA (NIOSH USA) 2 mg/m3 STEL (CH) Antimony 231-146-5 7440-36-0 1.5 mg/m3 TWA (CH) 0.5 mg/m3 TWA (ACGIH USA) 0.5 mg/m3 TWA (CA) 0.5 mg/m3 TWA (FI) 0.5 mg/m3 TWA (JP) 0.1 mg/m3 TWA(ME) 0.5 mg/m3 TWA(NIOSH USA) 0.5 mg/m3 TWA (OSHA USA) 0.5 mg/m3 TWA (ACGIH) Lead 231-100-4 7439-92-1 0.05 mg/m3 TWA(CA ON) 0.05 mg/m3 Designated substance regulationTWA(CA QU) 0.05 mg/m3 STEL(CH) 0.15 (0.09)mg/m3 Dust (fume) TWA(CH) 0.05(0.03)mg/m3 Dust (fume) TWA(FI) 0.1 mg/m3 Dust Biological Limit Value (FI) 1.4 umol/L TWA(JP) 0.1 mg/m3 TWA(ME) 0.15 mg/m3 As Pb, dust and fume TWA(NIOSH) 0.05 mg/m3 TWA(OSHA) 50 ug/m3 Exposure Controls: Store and charge in a well-ventilated area. General dilution ventilation is acceptable. Personal Protective Equipment: Pictograms: 7 Eye/Face Protection: Wear protective eyewear (goggles, face shield or safety glasses with side shields). Skin Protection: Wear protective gloves. No skin protection is ordinarily required under normal conditions of use, in accordance with industrial hygiene practices. If contact with leaking battery is expected, precautions should be taken to avoid skin contact. Under severe exposure or emergency conditions, wear acid resistant clothing and boots. Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Appearance: Physical state: Solid Color: Bluish gray metal Odor: Odorless Odor threshold: No Data Safety relevant basic data pH (20 ?C): No Data Melting point/range(?C): 252.2222-360. Initial boiling point/range (?C): 1380 Decomposition temperature (?C): No Data. Flash point (?C): No Data. Ignition temperature (?C): No Data. Vapor pressure (hPa): No Data. Vapor density (air = 1): No Data. Density (g/cm3): 599.3267-705.4575 lbs/ft3. Bulk density (kg/m3): No Data. Specific Gravity/Relative Density (Water=1): 9.6-11.3. Water solubility (20?C in g/l): No Data. Solubility(ies): No Data. Partition coefficient: No Data. N-Octanol/Water (log Po/w): No Data. Viscosity, dynamic (mPa s): No Data. Other safety information: Properties of explosive atmospheres (mixtures): Gases and vapors: No Data. Dusts: No Data. Physical chemical properties of nanoparticles: No Data. Limiting oxygen concentration: No Data. Bulk density: No Data. 8 Solubility in different media: No Data. Stability in organic solvents and identity of relevant degradation products: No Data. Evaporation rate: No Data. Conductivity: No Data. Surface tension: No Data. Dissociation constant in water (pKa): No Data. Oxidation-reduction Potential: No Data. Fat solubility (solvent ? oil to be specified): No Data. Critical temperature: No Data. SECTION 10: STABILITY & REACTIVITY Reactivity: Not reactive. Chemical stability: Stable under normal temperatures and pressures. Possibility of hazardous reactions Hazardous polymerization will not occur. Conditions to avoid: Prolonged overcharge, sources of ignition. Incompatible materials: Avoid contact with strong bases, acids, combustible organic materials,halides, halogenates, potassium nitrate, permanganate, peroxides, nascent hydrogen, reducing agents and water. Hazardous decomposition products: Lead compounds exposed to high temperatures will likely produce toxic metal fume, vapor or dust; contact with strong acid/base or presence of nascent hydrogen may generate highly toxic arsine gas. SECTION 11: TOXICOLOGICAL INFORMATION Lead (7439-92-1) Effect dose /Concentration Species Method Time Acute oral toxicity 155 mg/kg Human LDLo Acute oral toxicity 1050 ug/kg Rat TDLo 30 Weeks(int.) Acute inhalative toxicity (dust/mist) 0.011 mg/m3 Human LCLo 26 Weeks (int.) Mutagen 23 ug/m3 Rat Inhalation 16 Weeks Reproductive 790 mg/kg Rat TDLo (Oral) Reproductive 3 mg/m3 Rat TCLo(Inhalation) 1-21 Days preg. Antimony (7440-36-0) Effect dose /Concentration Species Method Time Acute oral toxicity 100 mg/kg Rat LD50 Acute inhalative toxicity (dust/mist) 13.5 mg/m3 Human LCLo 4 Hours Tumorigen/Carcinogen 50 mg/m3 Rat TCLo 7 hours 52weeks(int.) 9 Arsenic (7440-38-2) Effect dose /Concentration Species Method Time Acute oral toxicity 763 mg/kg Rat LD50 Acute oral toxicity 5 mg/kg Rat LDLo Mutagen 0.211 mg/L Human Oral 15 Years Reproductive 605 ug/kg Rat TDLo 35 weeks preg. Other information: In case of ingestion: Acute (Immediate): Under normal conditions of use, no health effects are expected. Lead ingestion may cause abdominal pain, nausea, vomiting, diarrhea and severe cramping. Chronic (Delayed): No data available. Carcinogenic Effects CAS IARC NTP Lead 7439-92-1 Group 2A?ProbableCarcinogen Reasonably anticipated to be human carcinogen Routes of exposure: In case of ingestion: Acute (Immediate): Under normal conditions of use, no health effects are expected. Lead ingestion may cause abdominal pain, nausea, vomiting, diarrhea and severe cramping. Chronic (Delayed): No data available. In case of skin contact: Acute (Immediate): Under normal conditions of use, no health effects are expected. Chronic (Delayed): No data available. In case of inhalation: Acute (Immediate): Under normal conditions of use, no health effects are expected. Contents of an open battery can cause respiratory irritation. Chronic (Delayed): Repeated and prolonged exposure may cause irritation. In case of eye contact: Acute (Immediate): Under normal conditions of use, no health effects are expected. Exposure to dust may cause irritation. Chronic (Delayed): No data available. SECTION 12: ECOLOGICAL INFORMATION Toxicity: Aquatic toxicity. Substances Acute (short-term) toxicity: No Data. 10 Persistence/Degradability: Lead is persistent in soils and sediments. SECTION 13: DISPOSAL CONSIDERATIONS Waste treatment methods: Product/packaging disposal: Dispose of content and/or container in accordance with local, regional, national, and/or international regulations. Waste codes/waste designations according to EWC/AVV: 16 06 05. Additional information: Any waste marked with an asterisk (*) is considered as a hazardous waste pursuant to Directive 91/689/EEC on hazardous waste, and subject to the provisions of that Directive unless Article 1(5) of that Directive applies. SECTION 14.TRANSPORT INFORMATION NOTE: This product is not regulated for domestic transport by land, air, or rail. ? Under 49 CFR 171.8, the individual packages that contain lead metal (<100 micrometers) below the reportable quantity (RQ) are not regulated. ? Under 49 CFR 171.4, except when transporting aboard a vessel, the requirements of this sub chapter specific to marine pollutants do not apply to non-bulk packaging transported by motor vehicles, rail cars, and aircrafts. DOT This product is not hazardous as defined by 49CFR 172.101 by the U.S. Department of Transportation. TDG This product is not classified as dangerous goods by the TDG standards UN- MEX Not regulated ICAO (air) This product is not classified as dangerous goods by the International Air Transport Association (IATA) or the ICAO IATA This product is not classified as dangerous goods by the International Air Transport Association (IATA) or the ICAO. 11 IMDG This product is not classified as dangerous goods by the IMO. RID This product is not classified by the United Nations Economic Commission for Europe to be dangerous goods. ADR This product is not classified by the United Nations Economic Commission for Europe to be dangerous goods. ADN Not regulated. SECTION 15: REGULATORY INFORMATION National regulations(Canada): WHMIS Classification: This product does not meet the classification criteria of the Controlled Products Regulations. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the Controlled Products Regulations. Canada DSL: The following substances are listed on the Canadian DSL: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440-70-2) Canada NDSL: None of the components on this SDS are listed on the Canadian NDSL: National regulations(China): The following components are listed on the Inventory list for China: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440-70-2). National regulations(European Union): Classification: Xi Risk Phrases: R36, R38. Safety Phrases: S1/2, S26, S30, S45. The following components are listed on the EU EINECS: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440- 70-2) None of the above mentioned components are listed on the EU ELNICS. 12 National regulations(Japan): The following chemicals are on the Japanese ENCS: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440- 70-2). National regulations(Korea): The following substances are listed on the Korean KECL: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440- 70-2). National regulations(United States): The following substances are on the MA, NJ, and PA Right To Know Lists: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440- 70-2). The following substances are on the TSCA inventory: Lead (7439-92-1); Antimony (7440-36-0); Tin (7440-31-5); Arsenic (7440-38-2); Calcium (7440- 70-2). SECTION 16: OTHER INFORMATION Relevant R-, H- and EUH-phrases (number and full text): Hazard Abbreviations: Xi: Irritant. Xn: Harmful. N: Dangerous for the environment T: Toxic. F: Highly Flammable. Risk Phrases: R15: Contact with water liberates extremely flammable gases. R20/22: Harmful by inhalation and if swallowed R23/25: Toxic by inhalation and if swallowed. R33: Danger of cumulative effects R36: Irritating to eyes. R38: Irritating to skin. R50: Very toxic to aquatic organisms. R50/53: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic. environment R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R53: May cause long-term adverse effects in the aquatic environment R61: May cause harm to the unborn child. R62: Possible risk of impaired fertility. Safety Phrases: S1/2: Keep locked up and out of the reach of children. S2: Keep out of the reach of children S8: Keep container dry. S20/21: When using do not eat, drink, or smoke. 13 S24/25: Avoid contact with skin and eyes. S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S28: After contact with skin, wash immediately with plenty of water. S30: Never add water to this product. S43: In case of fire use CO2, dry chemical, or foam. Never use water. S45: In case of accident or if you feel unwell seek medical advice immediately (show the label where possible) S53: Avoid exposure ? obtain special instructions before use. S60: This material and its container must be disposed of as hazardous waste. S61: Avoid release to the environment. Refer to special instructions/safety data sheet. Hazard statements: H313: May be harmful in contact with skin. H315: Causes skin irritation. H335: May cause respiratory irritation EUH201A: Warning! Contains lead. Precautionary statements: P102: Keep out of reach of children. P233: Keep containers tightly closed. P210: Keep away from heat, sparks, and open flame while charging batteries. Universal Power Group, Inc. provides the information in this SDS in good faith. However, This date sheet is intended, as a guide, for the appropriate precautionary handling of the material by a properly trained person using it. Individuals receiving this information must exercise their independent judgement in determining its appropriateness for a particular process. for damages resulting from use of reliance upon this information. Universal Power Group, Inc. makes no representations as to its comprehensiveness or accuracy. Universal Power Group, Inc. will not accept responsibility