Material Safety Data Sheet SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Lucas SAE 20W-50 Break-In Oil Product Description: Base Oil and Additives Product Number: 10635, 10636, 10637, 10638, 10639 Intended Use: Engine Oil COMPANY IDENTIFICATION Supplier: Lucas Oil Products Inc. Phone #: 1 (800) 342-2512 302 North Sheridan St. Corona, ca. 92880 USA SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS No Reportable Hazardous Substance(s) or Complex Substance(s). Name CAS# Concentration* Distillate, Severely Hydrotreated Heavy Paraffinic SECTION 3 HAZARDS IDENTIFICATION This material is not considered to be hazardous according to regulatory guidelines. POTENTIAL HEALTH EFFECTS Low order of toxicity. Excessive exposure may result in eye, skin, or respiratory irritation. NFPA Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 HMIS Hazard ID: Health: 1 Flammability: 1 Reactivity: 0 SECTION 4 FIRST AID MEASURES INHALATION Remove exposed person to fresh air. If respiratory symptoms develop seek medical attention. SKIN CONTACT Wash skin with mild soap and water. EYE CONTACT Flush thoroughly with water. If irritation occurs, seek medical attention. INGESTION Do not induce vomiting. If conscious give milk or water and seek medical attention. SECTION 5 FIRE FIGHTING MEASURES EXTINGUISHING MEDIA Appropriate Extinguishing Media: Use dry chemical, carbon dioxide, halon, or foam to extinguish flames. Inappropriate Extinguishing Media: Straight streams of water. FLAMMABILITY PROPERTIES Flash Point: >475 o F SECTION 6 ACCIDENTAL RELEASE MEASURES SPILL MANAGEMENT Land Spill: Stop source of ignition. Prevent additional discharge of material, if possible to do so safely. Contain and/or clean up with sand or earth on land. ENVIRONMENTAL PRECAUTIONS Prevent entry into waterways or sewers. SECTION 7 HANDLING AND STORAGE HANDLING Keep container tightly closed. STORAGE Store in a cool well ventilated place, away from heat and/or incompatible materials. SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION ENGINEERING CONTROLS: No special requirements under ordinary conditions of use and with adequate ventilation. PERSONAL PROTECTION Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage. Respiratory Protection: No special requirements under ordinary conditions of use and with adequate ventilation. Hand Protection: No protection is ordinarily required under normal conditions of use. Eye Protection: If contact is likely, safety glasses with side shields are recommended. Skin and Body Protection: No skin protection is ordinarily required under normal conditions of use. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Typical physical and chemical properties are given below. Consult the Supplier in Section 1 for additional data. GENERAL INFORMATION Physical State: Liquid Color: Amber Odor: Characteristic petroleum Density: 7.387 pounds/gallon Flash Point: 475 o F Autoignition Temperature: N/D Boiling Point: >500 o F pH: N/D Solubility in Water: Negligible @ 25 o C Viscosity cSt at 100 o C: Greater than or equal to: 20.1 SECTION 10 STABILITY AND REACTIVITY STABILITY: Material is stable under normal conditions. CONDITIONS TO AVOID: Excessive heat. MATERIALS TO AVOID: Strong oxidizers HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures. SECTION 11 TOXICOLOGICAL INFORMATION N/D SECTION 12 ECOLOGICAL INFORMATION N/D SECTION 13 DISPOSAL CONSIDERATIONS Disposal must be in accordance with current applicable laws and regulations. SECTION 14 TRANSPORT INFORMATION DOT : Not Regulated SECTION 15 REGULATORY INFORMATION OSHA HAZARD COMMUNICATION STANDARD: When used for its intended purposes, this material is not classified as hazardous. Chemical Name CAS Number Typical Value SECTION 16 OTHER INFORMATION N/D Original Date: 4-14-2010 Updated: New We believe the statements, technical information, and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assume no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.