3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 1 of 9 Safety Data Sheet Copyright,2018,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 23-5568-3 Version Number: 7.00 Issue Date: 08/29/18 Supercedes Date: 01/07/15 SECTION 1: Identification 1.1. Product identifier 3M? Quick Wax, 39034, 39034S Product Identification Numbers ID Number UPC ID Number UPC LB-K100-0377-9 60-4550-3270-0 60-4550-3379-9 60-4550-6623-7 00051131390348 60-4550-6642-7 00051131390348 7000042719, 7010364390 1.2. Recommended use and restrictions on use Recommended use Automotive, ENHANCE APPEARANCE OF AUTOMOTIVE SURFACE 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. 2.2. Label elements Signal word Not applicable. 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 2 of 9 Symbols Not applicable. Pictograms Not applicable. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Water 7732-18-5 60 - 100 Trade Secret * Carnauba Wax 8015-86-9 0.1 - 1 Trade Secret * Isopropyl Alcohol 67-63-0 0.1 - 1 Trade Secret * *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: No need for first aid is anticipated. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media Material will not burn. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Carbon monoxide During Combustion Carbon dioxide During Combustion 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 3 of 9 5.3. Special protective actions for fire-fighters No special protective actions for fire-fighters are anticipated. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with water. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. 7.2. Conditions for safe storage including any incompatibilities Keep container tightly closed. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Isopropyl Alcohol 67-63-0 ACGIH TWA:200 ppm;STEL:400 ppm A4: Not class. as human carcin Isopropyl Alcohol 67-63-0 OSHA TWA:980 mg/m3(400 ppm) ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 4 of 9 Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Eye protection not required. Skin/hand protection No chemical protective gloves are required. Respiratory protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties General Physical Form: Liquid Odor, Color, Grade: Tan/Brown Color slight solvent odor Odor threshold No Data Available pH 8.5 - 9.2 Melting point Not Applicable Boiling Point 212 ?F Flash Point > 212 ?F [Test Method:Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure No Data Available Vapor Density No Data Available Density 0.985 - 1.0 g/ml Specific Gravity 0.985 - 1.0 [Ref Std:WATER=1] Solubility in Water Complete Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 1 - 20 centipoise Hazardous Air Pollutants 0.17 % weight [Test Method:Calculated] Molecular weight No Data Available Volatile Organic Compounds 12 g/l [Test Method:calculated SCAQMD rule 443.1] Volatile Organic Compounds 1.2 % weight [Test Method:calculated per CARB title 2] Percent volatile 99 % weight VOC Less H2O & Exempt Solvents 379 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 5 of 9 10.1. Reactivity This material is considered to be non reactive under normal use conditions. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials None known. 10.6. Hazardous decomposition products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Contact with the skin during product use is not expected to result in significant irritation. Eye Contact: Contact with the eyes during product use is not expected to result in significant irritation. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 6 of 9 Name Route Species Value Overall product Ingestion No data available; calculated ATE >5,000 mg/kg Isopropyl Alcohol Dermal Rabbit LD50 12,870 mg/kg Isopropyl Alcohol Inhalation- Vapor (4 hours) Rat LC50 72.6 mg/l Isopropyl Alcohol Ingestion Rat LD50 4,710 mg/kg Carnauba Wax Dermal LD50 estimated to be > 5,000 mg/kg Carnauba Wax Ingestion Rat LD50 > 8,800 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Isopropyl Alcohol Multiple animal species No significant irritation Carnauba Wax Professio nal judgeme nt No significant irritation Serious Eye Damage/Irritation Name Species Value Isopropyl Alcohol Rabbit Severe irritant Carnauba Wax Professio nal judgeme nt No significant irritation Skin Sensitization Name Species Value Isopropyl Alcohol Guinea pig Not classified Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity Name Route Value Isopropyl Alcohol In Vitro Not mutagenic Isopropyl Alcohol In vivo Not mutagenic Carcinogenicity Name Route Species Value Isopropyl Alcohol Inhalation Rat Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test Result Exposure Duration Isopropyl Alcohol Ingestion Not classified for development Rat NOAEL 400 mg/kg/day during organogenesi s Isopropyl Alcohol Inhalation Not classified for development Rat LOAEL 9 mg/l during gestation 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 7 of 9 Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available Isopropyl Alcohol Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification Human NOAEL Not available Isopropyl Alcohol Inhalation auditory system Not classified Guinea pig NOAEL 13.4 mg/l 24 hours Isopropyl Alcohol Ingestion central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available poisoning and/or abuse Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation kidney and/or bladder Not classified Rat NOAEL 12.3 mg/l 24 months Isopropyl Alcohol Inhalation nervous system Not classified Rat NOAEL 12 mg/l 13 weeks Isopropyl Alcohol Ingestion kidney and/or bladder Not classified Rat NOAEL 400 mg/kg/day 12 weeks Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. SECTION 14: Transport Information 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 8 of 9 For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable Health Hazards Not applicable 15.2. State Regulations Contact 3M for more information. California Proposition 65 Ingredient C.A.S. No. Listing Arsenic None Carcinogen Cadmium None Male reproductive toxin Cadmium None Carcinogen Cadmium None Developmental Toxin Cobalt None Carcinogen Lead None Female reproductive toxin Lead None Male reproductive toxin Lead None Carcinogen Lead None Developmental Toxin Mercury None Developmental Toxin Nickel None Carcinogen Ethylene Glycol 107-21-1 Developmental Toxin 15.3. Chemical Inventories The components of this material are in compliance with the China "Measures on Environmental Management of New Chemical Substance". Certain restrictions may apply. Contact the selling division for additional information. The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 0 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar 3M? Quick Wax, 39034, 39034S 08/29/18 __________________________________________________________________________________________ Page 9 of 9 emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 23-5568-3 Version Number: 7.00 Issue Date: 08/29/18 Supercedes Date: 01/07/15 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for user's method of use or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of which are uniquely within the user's knowledge and control,it is essential that the user evaluate the3Mproduct to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from3M 3M USA SDSs are available at www.3M.com