Full Text
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Code(s) 05100, 05101, 05102, 05104 Product Name Mothers Mag & Aluminum Polish Recommended Use Metal polish Company MOTHERS POLISHES WAXES CLEANERS 5456 Industrial Drive Huntington Beach, CA 92649 TEL: 714-891-3364 FAX: 714-893-1827 Supplier MOTHERS POLISHES WAXES CLEANERS 5456 Industrial Drive Huntington Beach, CA 92649 TEL: 714-891-3364 FAX: 714-893-1827 For further information, please contact E-mail Address This email address is being protected from spambots. You need JavaScript enabled to view it. Emergency Telephone Number Chemtrec 1-800-424-9300 2. HAZARDS IDENTIFICATION The product is non-dangerous in accordance with Directive 1999/45/EC Classification Hazard Symbols Not dangerous Most Important Hazards None 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name EC-No REACH No. CAS-No Weight % Classification Petroleum distillates, hydrotreated light 265-149-8 No data available 64742-47-8 25-50 Xn;R65 R66 Solvent naphtha (petroleum), medium aliphatic 265-191-7 No data available 64742-88-7 <10 Xn;R65 R10 Stearic acid 200-313-4 No data available 57-11-4 <10 Xi;R36 Poly(oxy-1,2-ethanediyl), .alpha.-[(1,1,3,3- tetramethylbutyl)phenyl]- .omega.-hydroxy- - No data available 9036-19-5 <10 Xn;R22 Xi;R41 Hexylene glycol 203-489-0 No data available 107-41-5 <10 Xi;R36/38 _____________________________________________________________________________________________ SAFETY DATA SHEET Issuing Date 03-Apr-2007 Revision Date 11-Mar-2011 Page 1 / 7 Revision Number 3 _____________________________________________________________________________________________ For the full text of the R-phrases mentioned in this Section, see Section 16 4. FIRST AID MEASURES General Advice If symptoms persist, call a physician. Show this safety data sheet to the doctor in attendance. Eye Contact Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. If symptoms persist, call a physician. Skin Contact Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician. Ingestion Rinse mouth. Drink plenty of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Consult a physician. Inhalation Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. If symptoms persist, call a physician. Notes to Physician Treat symptomatically. 5. FIRE-FIGHTING MEASURES Suitable Extinguishing Media Carbon dioxide (CO2). Dry powder. Dry chemical. Foam. Extinguishing media which must not be used for safety reasons Do not use a solid water stream as it may scatter and spread fire. Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases None in particular. Special protective equipment for fire-fighters As in any fire, wear self-contained breathing apparatus and full protective gear. 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Use personal protective equipment. Avoid contact with the skin and the eyes. Environmental Precautions Refer to protective measures listed in Sections 7 and 8. Methods for Cleaning up Soak up with inert absorbent material. Clean contaminated surface thoroughly. Other Information See Section 12 for additional information. 7. HANDLING AND STORAGE Handling Handle in accordance with good industrial hygiene and safety practice. Ensure adequate ventilation. Avoid contact with skin and eyes. Storage Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of children. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limits _____________________________________________________________________________________________ Page 2 / 7 WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Revision Date 11-Mar-2011 _____________________________________________________________________________________________ Chemical Name EU The United Kingdom France Spain Germany Hexylene glycol 107-41-5 STEL: 123 mg/m3 STEL: 25 ppm TWA: 123 mg/m3 TWA: 25 ppm VLCT: 125 mg/m3 VLCT: 25 ppm VLA-EC: 25 ppm VLA- EC; 123 mg/m3 VLA-EC MAK: 10 ppm MAK: 49 mg/m3 Ceiling / Peak: 20 ppm Ceiling / Peak: 98 mg/m3 Chemical Name Italy Portugal The Netherlands Finland Denmark Hexylene glycol 107-41-5 Ceiling: 25 ppm Ceiling: 25 ppm Ceiling; 125 mg/m3 Ceiling MAC: 25 ppm MAC; 125 mg/m3 MAC TWA: 120 mg/m3 TWA: 25 ppm STEL: 200 mg/m3 STEL: 40 ppm Ceiling: 125 mg/m3 Ceiling: 25 ppm Chemical Name Austria Switzerland Poland Norway Ireland Hexylene glycol 107-41-5 STEL 10 ppm STEL 49 mg/m3 MAK: 10 ppm MAK: 49 mg/m3 Ceiling 10 ppm Ceiling 49 mg/m3 STEL: 20 ppm STEL; 98 mg/m3 STEL MAK: 10 ppm MAK; 49 mg/m3 MAK NDSP: 120 mg/m3 Ceiling: 100 mg/m3 Ceiling: 20 ppm TWA: 125 mg/m3 TWA: 25 ppm STEL: 125 mg/m3 STEL: 25 ppm Occupational Exposure Controls Engineering Measures Ensure adequate ventilation, especially in confined areas. Personal Protective Equipment Eye Protection Safety glasses with side-shields. Hand Protection Protective gloves. Skin and Body Protection No special protective equipment required. Respiratory Protection None required under normal usage. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Hygiene Measures When using, do not eat, drink or smoke. Provide regular cleaning of equipment, work area and clothing. Environmental Exposure Controls Do not allow material to contaminate ground water system. 9. PHYSICAL AND CHEMICAL PROPERTIES Important health safety and environmental information 10. STABILITY AND REACTIVITY Stability Stable under normal conditions. Conditions to Avoid Heat, flames and sparks. _____________________________________________________________________________________________ Pine Evaporation Rate No information available Vapor Density No information available. WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Revision Date 11-Mar-2011 Flash Point 90?C / 194?F Other information Boiling Point/Boiling Range No information available. Melting Point/Range 55?C Physical State Solid pH No information available. Autoignition Temperature No information available. Vapor Pressure No information available Appearance White VOC Content (%) <30 Viscosity No information available General Information Page 3 / 7 Specific Gravity No information available Odor Flammability Limits in Air No information available. _____________________________________________________________________________________________ Materials to Avoid None in particular. Hazardous Decomposition Products None under normal use. Thermal decomposition can lead to release of irritating gases and vapors. 11. TOXICOLOGICAL INFORMATION Acute Toxicity Product Information Inhalation May cause drowsiness and dizziness. Eye Contact May cause slight irritation. Skin Contact Prolonged or repeated contact may dry skin and cause irritation Ingestion Ingestion may cause irritation to mucous membranes. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Component Information Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation Petroleum distillates, hydrotreated light > 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) > 5.2 mg/L ( Rat ) 4 h Stearic acid - 5 g/kg ( Rabbit ) - Poly(oxy-1,2-ethanediyl), .alpha.- [(1,1,3,3-tetramethylbutyl)phenyl]- .omega.-hydroxy- = 4190 mg/kg ( Rat ) Hexylene glycol = 3692 mg/kg ( Rat ) 12,3000 mg/kg ( Rabbit ) > 310 mg/m3( Rat ) 1 h Alumina > 5000 mg/kg ( Rat ) Solvent naphtha (petroleum), medium aliphatic > 5000 mg/kg ( Rat ) = 3000 mg/kg ( Rabbit ) > 5.28 mg/L ( Rat ) 4 h Triethanolamine = 4190 mg/kg ( Rat ) > 16 mL/kg ( Rat ) > 2000 mg/kg ( Rabbit ) Tall oil fatty acids = 7600 mg/kg ( Rat ) Chronic Toxicity Target Organ Effects Central nervous system (CNS). Eyes. Respiratory system. Skin. Endocrine Disruptor Information Chemical Name EU - Endocrine Disrupters Candidate List EU - Endocrine Disruptors - Evaluated Substances Japan - Endocrine Disruptor Information Poly(oxy-1,2-ethanediyl), .alpha.- [(1,1,3,3-tetramethylbutyl)phenyl]- .omega.-hydroxy- Group III Chemical Industrial chemical 12. ECOLOGICAL INFORMATION Ecotoxicity Do not allow material to contaminate ground water system. _____________________________________________________________________________________________ Page 4 / 7 WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Revision Date 11-Mar-2011 _____________________________________________________________________________________________ Chemical Name Toxicity to Algae Toxicity to Fish Toxicity to Microorganisms Daphnia Magna (Water Flea) Petroleum distillates, hydrotreated light LC50 96 h: = 2.2 mg/L static (Lepomis macrochirus) LC50 96 h: = 2.4 mg/L static (Oncorhynchus mykiss) LC50 96 h: = 45 mg/L flow- through (Pimephales promelas) LC50 96 h: = 4720 mg/L (Den-dronereides heteropoda) Solvent naphtha (petroleum), medium aliphatic EC50 96 h: = 450 mg/L (Pseudokirchneriella subcapitata) LC50 96 h: = 800 mg/L static (Pimephales promelas) EC50 48 h: > 100 mg/L (Daphnia magna) Hexylene glycol LC50 96 h: 10500-11000 mg/L flow-through (Pimephales promelas) LC50 96 h: = 10000 mg/L static (Lepomis macrochirus) LC50 96 h: = 10700 mg/L static (Pimephales promelas) LC50 96 h: = 8690 mg/L flow- through (Pimephales promelas) EC50 = 3038 mg/L 5 min EC50 48 h: 2700 - 3700 mg/L (Daphnia magna) Persistence and Degradability No information available. Bioaccumulative Potential No information available. Mobility Adsorbs on soil. Chemical Name Log Pow Hexylene glycol 0.13986 13. DISPOSAL CONSIDERATIONS Waste from Residues / Unused Products Dispose of in accordance with local regulations. Contaminated Packaging Empty containers should be taken to an approved waste handling site for recycling or disposal. Other Information According to the European Waste Catalogue, Waste Codes are not product specific, but application specific. Waste codes should be assigned by the user based on the application for which the product was used. 14. TRANSPORT INFORMATION IMDG/IMO Not regulated RID Not regulated ADR Not regulated ICAO Not regulated IATA Not regulated _____________________________________________________________________________________________ WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Page 5 / 7 Revision Date 11-Mar-2011 _____________________________________________________________________________________________ 15. REGULATORY INFORMATION The product is non-dangerous in accordance with Directive 1999/45/EC Labeling EU Labeling Safety data sheet available for professional user on request Symbol(s) Not dangerous R-phrase(s) None S-phrase(s) No information available. International Inventories TSCA Complies EINECS/ELINCS Complies DSL/NDSL - PICCS - ENCS - IECSC - AICS - KECL - Legend TSCA - United States Toxic Substances Control Act Section 8(b) Inventory EINECS/ELINCS - European Inventory of Existing Commercial Chemical Substances/EU List of Notified Chemical Substances DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List PICCS - Philippines Inventory of Chemicals and Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances AICS - Australian Inventory of Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances 16. OTHER INFORMATION Full text of R-phrases referred to under Sections 2 and 3 R10 - Flammable R66 - Repeated exposure may cause skin dryness or cracking R65 - Harmful: may cause lung damage if swallowed R36 - Irritating to eyes R41 - Risk of serious damage to eyes R22 - Harmful if swallowed R36/38 - Irritating to eyes and skin Prepared By Product Stewardship 23 British American Blvd. Latham, NY 12110 1-800-572-6501 Issuing Date 03-Apr-2007 Revision Date 11-Mar-2011 Revision Note Product Code change. This safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 _____________________________________________________________________________________________ Page 6 / 7 WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Revision Date 11-Mar-2011 _____________________________________________________________________________________________ General Disclaimer The information provided on this SDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text End of Safety Data Sheet _____________________________________________________________________________________________ Page 7 / 7 WPS-MPWC-05100 - Mothers Mag & Aluminum Polish Revision Date 11-Mar-2011