SAFETY DATA SHEET 1. Identification MERCON? V Automatic Transmission and Power Steering FluidProduct identifier Other means of identification 184629FIR No. Fill for automatic transmissions and power steering systems requiring MERCON V? fluidRecommended use None known.Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Company Name Ford Motor Company Address Attention: MSDS Information, P.O. Box 1899 Dearborn, Michigan 48121 USA Telephone 1-800-392-3673 SDS Information 1-800-448-2063 (USA and Canada) fordsds.com Emergency telephone numbers Poison Control Center: USA and Canada: 1-800-959-3673 INFOTRAC (Transportation): USA and Canada 1-800-535-5053 2. Hazard(s) identification Not classified.Physical hazards Not classified.Health hazards Not classified.Environmental hazards Not classified.OSHA defined hazards Label elements None.Hazard symbol Signal word None. Hazard statement The mixture does not meet the criteria for classification. Precautionary statement Prevention Observe good industrial hygiene practices. Response Wash hands after handling. Storage Store away from incompatible materials. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise classified (HNOC) Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis. Direct contact with eyes may cause temporary irritation. Supplemental information None. 3. Composition/information on ingredients Mixtures The components are not hazardous or are below required disclosure limits. 4. First-aid measures Move to fresh air. Call a physician if symptoms develop or persist.Inhalation Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation develops and persists. Skin contact Rinse with water. Get medical attention if irritation develops and persists.Eye contact Rinse mouth. Get medical attention if symptoms occur.Ingestion FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 1 / 6 Direct contact with eyes may cause temporary irritation.Most important symptoms/effects, acute and delayed Treat symptomatically.Indication of immediate medical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing media During fire, gases hazardous to health may be formed. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Specific hazards arising from the chemical Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment and precautions for firefighters Move containers from fire area if you can do so without risk.Fire fighting equipment/instructions Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods No unusual fire or explosion hazards noted.General fire hazards 6. Accidental release measures Avoid inhalation of vapors or mists. Avoid contact with eyes, skin, and clothing. Keep unnecessary personnel away. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures The product is immiscible with water and will spread on the water surface. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Methods and materials for containment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions 7. Handling and storage Avoid breathing mist or vapor. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. Observe good industrial hygiene practices. For personal protection, see section 8 of the SDS. Precautions for safe handling Store in original tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection No biological exposure limits noted for the ingredient(s).Biological limit values Use adequate ventilation to control airborne concentrations below the exposure limits/guidelines. If user operations generate a vapor, dust and/or mist, use process enclosure, appropriate local exhaust ventilation, or other engineering controls to control airborne levels below the recommended exposure limits/guidelines. Appropriate engineering controls Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles).Eye/face protection Skin protection The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Suitable chemical protective gloves should be worn when the potential exists for skin exposure. Nitrile gloves are recommended. Hand protection Wear appropriate chemical resistant clothing if applicable.Other FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 2 / 6 If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, an approved respirator must be worn. Respirator selection, use and maintenance should be in accordance with the requirements of OSHA Respiratory Protection Standard 29 CFR 1910.134 and/or Canadian Standard CSA Z94.4. Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Liquid.Physical state Liquid.Form Red.Color Aliphatic.Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point > 314.6 ?F (> 157.0 ?C) Pensky-Martens Closed Cup Evaporation rate < 1 (BuAc=1) Not applicable.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Explosive limit - lower (%) Not available. Explosive limit - upper (%) Not available. Vapor pressure < 0.1 kPa @ 20?C Vapor density > 1 (AIR=1) Relative density 0.85 - 0.86 Relative density temperature 60.08 ?F (15.6 ?C) Solubility(ies) Solubility (water) Negligible Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature Not available. Decomposition temperature Not available. Viscosity 31 - 37 cSt Viscosity temperature 104 ?F (40 ?C) 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions Contact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Hazardous decomposition products FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 3 / 6 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Inhalation of vapors/fumes generated by heating this product may cause respiratory irritation with throat discomfort, coughing or difficulty breathing. Skin contact Frequent or prolonged contact may defat and dry the skin, leading to discomfort and dermatitis. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion Expected to be a low ingestion hazard. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Not expected to be hazardous by OSHA criteria. Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. Base oil severely refined: Not carcinogenic in animal studies. Representative material passes IP-346, Modified Ames test, and/or other screening tests. This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not an aspiration hazard. Chronic effects Prolonged inhalation may be harmful. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Ecotoxicity No data is available on the degradability of this product. Persistence and degradability No data available.Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Don't pollute. Conserve resources. Return used oil to collection centers. Disposal instructions Dispose in accordance with all applicable regulations.Local disposal regulations The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Hazardous waste code Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Waste from residues / unused products Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Contaminated packaging FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 4 / 6 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. Not established.Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. SARA 304 Emergency release notification Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Hazard categories SARA 302 Extremely hazardous substance Not listed. NoSARA 311/312 Hazardous chemical SARA 313 (TRI reporting) Not regulated. Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. US state regulations International Inventories All components are listed or are exempt from listing on the Toxic Substances Control Act Inventory. 16. Other information, including date of preparation or last revision 02-22-2017Issue date Version 01 Health: 0 Flammability: 1 Physical hazard: 0 HMIS? ratings Health: 0 Flammability: 1 Instability: 0 NFPA ratings FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 5 / 6 This document was prepared by FCSD-Toxicology, Ford Motor Company, Fairlane Business Park IV, 17225 Federal Drive, Allen Park, MI 48101, USA, based in part on information provided by the manufacturer. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. To the extent that there are any differences between this product?s Safety Data Sheet (SDS) and the consumer packaged product labels, the SDS should be followed. This document was prepared by FCSD-Toxicology, Ford Motor Company, Diagnostic Service Center II, 1800 Fairlane Drive, Allen Park, MI 48101, USA, based in part on information provided by the manufacturer. The information on this data sheet represents our current data and is accurate to the best of our knowledge as to the proper handling of this product under normal conditions and in accordance with the application specified on the packaging and/or technical guidance literature. Any other use of the product which involves using the product in combination with any other product or any other process is the responsibility of the user. Preparation Information and Disclaimer XL-14, XT-5-5QM, XT-5-6GM, XT-5-BM, XT-5-DMC, XT-5-DMCR, XT-5-GM, XT-5-QM, XT-5-QM1, XT-5-QMC, XT-5-RM Part number(s) FIR No.: 184629 SDS US Issue Date: 02-22-2017 Version: 01 6 / 6