SDS Repository

sds

Collection
Berkbile Oil
Description
B303 SPRAY SILICONE AEROSOL 10 OZ.
Tags
Search Tag
Filename
b303_spray_silicone_lubricant_sds.pdf
Source
 
Full Text
Page 1 of 4 SDS for: BERKEBILE SILICONE SPRAY (B-303) Printed: 4/17/2015 SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: BERKEBILE SILICONE SPRAY (B-303) 2. HAZARDS IDENTIFICATION CLASSIFICATION Flammable aerosol 1 Gas under pressure Liquefied gas Skin Corrosion/Irritation 3 Eye Damage/Irritation 2 Aspiration hazard 2 SIGNAL WORD: Danger Hazard Statements Extremely flammable aerosol Contains gas under pressure; may explode if heated May be harmful if swallowed and enters airways Causes mild skin irritation Precautionary Statements Keep away from heat/sparks/open flames/hot surfaces ? No smoking Do not spray on an open flame or other igntion source Pressurized container ? Do not pierce or burn, even after use Wash hands thoroughly after handling Wear protective gloves/protective clothing/eye protection/face protection IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician IF SWALLOWED: Rinse mouth. Do NOT induce vomiting IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do ? continue rinsing If skin irritation occurs: Get medical advice/attention If eye irritation persists: Get medical advice/attention Protect from sunlight. Do not expose to temperatures exceeding 50 ?C/122 ?F Dispose of contents/container to comply with all local, state, and federal regulations MANUFACTURED FOR: The Berkebile Oil Company INC. 1216 Red Brant Road Somerset, PA 15501 USA Mailing Address: PO BOX 715 Somerset, PA 15501 EMERGENCY NUMBER: (800) 424-9300 (CHEM TREC) INFO NUMBER: (814) 443-1656 Page 2 of 4 SDS for: BERKEBILE SILICONE SPRAY (B-303) Printed: 4/17/2015 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS No. Percent PETROLEUM DISTILLATE 64742-47-8 30-35 PROPANE 74-98-6 25-30 NAPHTHA (PETROLEUM), HYDROTREATED LIGHT 64742-49-0 25-30 POLYDIMETHYLSILOXANE 63148-62-9 5-10 4. FIRST AID MEASURES INHALATION: Remove to fresh air. Administer oxygen if needed. Apply artificial respiration if breating has stopped . Get medical attention. EYE CONTACT: Wash immediately with large volumes of fresh water for at least 15 minutes . Get medical attention. SKIN CONTACT: Wipe off with a towel. Wash with soap and water. Get medical attention if irritation persists. INGESTION: Not a likely route of exposure. Most important symptoms/effects, acute and delayed: Repeated exposure may cause skin dryness or cracking. May cause drowsiness or dizziness. Indication of immediate medical attention and special treatment needed: None known. 5. FIRE FIGHTING MEASURES Suitable and unsuitable extinguising media: Foam, Alcohol foam, CO2, Dry chemical, Water fog . Water spray may be ineffective. Specific hazards arising from the chemical: Closed containers may explode from internal pressure build-up when exposed to extreme heat and discharge contents. Liquid content of container will support combustion. Overexposure to decomposition products may cause a health hazard. Symptoms may not be readily apparent. Obtain medical attention. Hazardous decomposition products include carbon dioxide, carbon monoxide, and other toxic fumes. Special equipment and precautions for fire-fighters: Water may be used to cool containers to prevent pressure build-up and explosion when exposed to extreme heat. Wear goggles and use self-contained breathing apparatus . If water is used, fog nozzles are preferred. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment, and emergency procedures: Avoid breathing vapors. Ventilate area. Remove all sources of ignition. Methods and materials for containment and cleaning up: Clean up with absorbent material and place in closed containers for disposal. 7. HANDLING AND STORAGE Precautions for safe handling: Do not puncture or incinerate (burn) cans. Do not stick pins, nails, or any other sharp objects into opening on top of can. Do not spray in eyes. Do not take internally. See product label for additional information. Conditions for safe storage, including any incompatibilities: Store and use in cool, dry, well-ventilated areas . Do not store above 120 F. Page 3 of 4 SDS for: BERKEBILE SILICONE SPRAY (B-303) Printed: 4/17/2015 8. EXPOSURE CONTROL/PERSONAL PROTECTION Chemical Name / CAS No. OSHA Exposure Limits ACGIH Exposure Limits Other Exposure Limits PETROLEUM DISTILLATE 64742-47-8 Not established Not established PROPANE 74-98-6 Not established TWA: 1000 ppm NAPHTHA (PETROLEUM), HYDROTREATED LIGHT 64742-49-0 TWA: 500 ppm; PEL-CEILING: not determined TLV-TWA: 500 ppm TLV-STEL: 1000 ppm POLYDIMETHYLSILOXANE 63148-62-9 Not established Not established Appropriate engineering controls: Ventilation should be sufficient to prevent inhalation of any vapors . General dilution and/or local exhoust ventilation in volume to keep PEL/TLV of most hazardous ingredient below acceptable limit and lel below stated limit. Individual protection measures: Respiratory protection: None under normal use. Avoid breathing vapors. In restricted areas , use approved chemical/mechanical filters designed to remove a combination or particles and vapor. In confined areas, use an approved air line respirator or hood. Self-contained breathing apparatus is required for vapor concentrations above PEL/TLV limits. Protective gloves: None under normal use. Use solvent-resistant for prolonged or repeated contact. Eye protection: None under normal use. However, use of safety glasses with splah guards or full face shield should be used if indicated. Other protective clothing or equipment: None under normal use. However, use of solvent- resitant aprons or other clothing is recommended. Eye washes and safety showers in the workplace are recommended. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Aerosol product Vapor Pressure: Not determined Vapor Density: Heavier than air Density: 0.660653717 Freezing point: Not determined Boiling point: 93?C Evaporation rate: Slower than ether Explosive Limits: Not applicable Autoignition temperature: Not determined Viscosity: Not determined Odor: Solvent Odor threshold: Not determined pH: Not applicable Melting point: Not determined Solubility: Not determined Flash point: Not determined Flammability: Level 3 Aerosol Partition coefficient (n- Not determined octanol/water): Decomposition temperature: Not determined 10. STABILITY AND REACTIVITY Reactivity: Not reactive under normal conditions of use. Chemical stability: Stable under normal storage and handling conditions. Page 4 of 4 SDS for: BERKEBILE SILICONE SPRAY (B-303) Printed: 4/17/2015 Possibility of hazardous reactions: None known. Incompatible materials: No data Hazardous decomposition products: No data 11. TOXICOLOGICAL INFORMATION Long-term toxicological studies have not been conducted for this product. 12. ECOLOGICAL INFORMATION Long-term ecological studies have not been conducted for this product. 13. DISPOSAL CONSIDERATIONS Dispose of in accordance with local, state, and federal regulations. Before attempting clean up, refer to other sections of this document for hazard cautionary information. 14. TRANSPORT INFORMATION By land: DOT Proper Shipping Name: None required per 49 CFR 173 .306(i) for products that conform to the Limited Quantity provisions. Commodity shipping description: Lubricant, NOI By water: DOT & IMDG Proper Shipping Name: UN1950, Aerosols, 2 .1, LTD QTY By air: DOT & IATA Proper Shipping Name: UN1950, Aerosols, flammable, 2 .1, LTD QTY (packing instruction Y203 applies) 15. REGULATORY INFORMATION All ingredients are either listed on the TSCA inventory or are exempt . 16. OTHER INFORMATION Date Prepared: 4/17/2015 Revision 0 Date revised: 2015-04-17 THE INFORMATION CONTAINED HEREIN IS BASED ON DATA CONSIDERED ACCURATE. HOWEVER, NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THE DATA OR THE RESULTS TO BE OBTAINED FROM THE USE THEREOF. BECAUSE THE INFORMATION CONTAINED HEREIN MAY BE APPLIED UNDER CONDITIONS BEYOND OUR CONTROL, WE ASSUME NO RESPONSIBILITY FOR ITS USE.