G210256 Hybrid Ceramic Wash & Wax Kit 09/04/20 Safety Data Sheet Copyright,2020, Meguiar's Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 41-8966-8 Version Number: 1.00 Issue Date: 09/04/20 Supercedes Date: Initial Issue Product identifier G210256 Hybrid Ceramic Wash & Wax Kit Recommended use Automotive Supplier's details MANUFACTURER: Meguiar's, Inc. DIVISION: Meguiar's ADDRESS: 17991 Mitchell South, Irvine, CA 92614, USA Telephone: 949-752-8000 (Fax: 949-752-5784) Emergency telephone number CHEMTREC 1-800-424-9300 (24 hours) This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included. Please do not separate the component documents from this cover page. The document numbers for components of this product are: 41-7591-5, 41-7593-1 Transport Information DOTG: LIMITED QUANTITY DOTW: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, LIMITED QUANTITY, +013C IATA: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, 0.24L IMDG: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, LIMITED QUANTITY, +013C G210256 Hybrid Ceramic Wash & Wax Kit 09/04/20 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. Meguiar's Inc. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the Meguiar's Inc. product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a Meguiar's Inc. product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the Meguiar's Inc. product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. Meguiar's Inc. provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, Meguiar's Inc. makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from Meguiar's Inc. Meguiar's, Inc. USA SDSs are available at www.Meguiars.com Page 2 of 2 Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 1 of 10 Safety Data Sheet Copyright,2020, Meguiar's Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 41-7591-5 Version Number: 1.01 Issue Date: 10/16/20 Supercedes Date: 08/26/20 SECTION 1: Identification 1.1. Product identifier Hybrid Ceramic SiO2 BOOST G2108 Product Identification Numbers LB-1100-2997-5 1.2. Recommended use and restrictions on use Recommended use Automotive 1.3. Supplier?s details MANUFACTURER: Meguiar's, Inc. DIVISION: Meguiar's ADDRESS: 17991 Mitchell South, Irvine, CA 92614, USA Telephone: 949-752-8000 (Fax: 949-752-5784) 1.4. Emergency telephone number CHEMTREC 1-800-424-9300 (24 hours) SECTION 2: Hazard identification 2.1. Hazard classification Flammable Liquid: Category 2. Serious Eye Damage/Irritation: Category 2A. Aspiration Hazard: Category 1. 2.2. Label elements Signal word Danger Symbols Flame | Exclamation mark | Health Hazard | Pictograms Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 2 of 10 Hazard Statements Highly flammable liquid and vapor. Causes serious eye irritation. May be fatal if swallowed and enters airways. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Wear protective gloves and eye/face protection. Wash thoroughly after handling. Response: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Do NOT induce vomiting. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. Storage: Store in a well-ventilated place. Keep cool. Store locked up. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 22% of the mixture consists of ingredients of unknown acute oral toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt HYDROTREATED LIGHT PETROLEUM DISTILLATES 64742-47-8 30 - 60 Trade Secret * Isopropyl Alcohol 67-63-0 10 - 20 Trade Secret * Any remaining components do not contribute to the hazards of this material. *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 3 of 10 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention. If Swallowed: Do not induce vomiting. Get immediate medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable. SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode. 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 4 of 10 Ingredient C.A.S. No. Agency Limit type Additional Comments Kerosine (petroleum) 64742-47-8 ACGIH TWA(as total hydrocarbon vapor, non-aerosol):200 mg/m3 A3: Confirmed animal carcin., SKIN Isopropyl Alcohol 67-63-0 ACGIH TWA:200 ppm;STEL:400 ppm A4: Not class. as human carcin Isopropyl Alcohol 67-63-0 OSHA TWA:980 mg/m3(400 ppm) available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible using non-sparking tools. Place in a metal container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Avoid eye contact. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. To minimize the risk of ignition, determine applicable electrical classifications for the process using this product and select specific local exhaust ventilation equipment to avoid flammable vapor accumulation. Ground/bond container and receiving equipment if there is potential for static electricity accumulation during transfer. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store away from acids. Store away from oxidizing agents. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 5 of 10 protection(s) are recommended: Indirect Vented Goggles Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate When only incidental contact is anticipated, alternative glove material(s) may be used. If contact with the glove does occur, remove immediately and replace with a set of new gloves. For incidental contact, gloves made of the following material(s) may be used:Nitrile Rubber Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Colorless Odor Fruity Odor Odor threshold No Data Available pH No Data Available Melting point No Data Available Boiling Point 180.5 ?F Flash Point 13 ?C [Test Method:Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure No Data Available Vapor Density No Data Available Specific Gravity .87 Solubility In Water No Data Available Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity No Data Available Volatile Organic Compounds .0724 % weight SECTION 10: Stability and reactivity 10.1. Reactivity Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 6 of 10 This material is considered to be non reactive under normal use conditions. This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Sparks and/or flames 10.5. Incompatible materials Strong oxidizing agents 10.6. Hazardous decomposition products Substance Condition None known. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: May be harmful if inhaled. Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Ingestion: Chemical (Aspiration) Pneumonitis: Signs/symptoms may include coughing, gasping, choking, burning of the mouth, difficulty breathing, bluish colored skin (cyanosis), and may be fatal. Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 7 of 10 Name Route Value Species Test Result Exposure Acute Toxicity Name Route Species Value Overall product Inhalation- Vapor(4 hr) No data available; calculated ATE20 - 50 mg/l Overall product Ingestion No data available; calculated ATE >5,000 mg/kg HYDROTREATED LIGHT PETROLEUM DISTILLATES Inhalation- Vapor Professio nal judgeme nt LC50 estimated to be 20 - 50 mg/l HYDROTREATED LIGHT PETROLEUM DISTILLATES Dermal Rabbit LD50 > 5,000 mg/kg HYDROTREATED LIGHT PETROLEUM DISTILLATES Ingestion Rat LD50 > 5,000 mg/kg Isopropyl Alcohol Dermal Rabbit LD50 12,870 mg/kg Isopropyl Alcohol Inhalation- Vapor (4 hours) Rat LC50 72.6 mg/l Isopropyl Alcohol Ingestion Rat LD50 4,710 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value HYDROTREATED LIGHT PETROLEUM DISTILLATES Rabbit Minimal irritation Isopropyl Alcohol Multiple animal species No significant irritation Serious Eye Damage/Irritation Name Species Value HYDROTREATED LIGHT PETROLEUM DISTILLATES Rabbit Mild irritant Isopropyl Alcohol Rabbit Severe irritant Skin Sensitization Name Species Value HYDROTREATED LIGHT PETROLEUM DISTILLATES Guinea pig Not classified Isopropyl Alcohol Guinea pig Not classified Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity Name Route Value HYDROTREATED LIGHT PETROLEUM DISTILLATES In Vitro Not mutagenic HYDROTREATED LIGHT PETROLEUM DISTILLATES In vivo Not mutagenic Isopropyl Alcohol In Vitro Not mutagenic Isopropyl Alcohol In vivo Not mutagenic Carcinogenicity Name Route Species Value HYDROTREATED LIGHT PETROLEUM DISTILLATES Not Specified Not available Not carcinogenic Isopropyl Alcohol Inhalation Rat Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 8 of 10 Duration HYDROTREATED LIGHT PETROLEUM DISTILLATES Not Specified Not classified for female reproduction Rat NOAEL Not available 1 generation HYDROTREATED LIGHT PETROLEUM DISTILLATES Not Specified Not classified for male reproduction Rat NOAEL Not available 28 days HYDROTREATED LIGHT PETROLEUM DISTILLATES Not Specified Not classified for development Rat NOAEL Not available during gestation Isopropyl Alcohol Ingestion Not classified for development Rat NOAEL 400 mg/kg/day during organogenesi s Isopropyl Alcohol Inhalation Not classified for development Rat LOAEL 9 mg/l during gestation Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available Isopropyl Alcohol Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification Human NOAEL Not available Isopropyl Alcohol Inhalation auditory system Not classified Guinea pig NOAEL 13.4 mg/l 24 hours Isopropyl Alcohol Ingestion central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available poisoning and/or abuse Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation kidney and/or bladder Not classified Rat NOAEL 12.3 mg/l 24 months Isopropyl Alcohol Inhalation nervous system Not classified Rat NOAEL 12 mg/l 13 weeks Isopropyl Alcohol Ingestion kidney and/or bladder Not classified Rat NOAEL 400 mg/kg/day 12 weeks Aspiration Hazard Name Value HYDROTREATED LIGHT PETROLEUM DISTILLATES Aspiration hazard Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 9 of 10 Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. SECTION 14: Transport Information DOTG: LIMITED QUANTITY DOTW: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, LIMITED QUANTITY, +013C IATA: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, 0.24L IMDG: UN1993, FLAMMABLE LIQUID, N.O.S., (HYDROTREATED LIGHT PETROLEUM DISTILLATES, ISOPROPYL ALCOHOL), 3, II, LIMITED QUANTITY, +013C Please contact the emergency numbers listed on the first page of the SDS for Transportation Information for this material. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact manufacturer for more information EPCRA 311/312 Hazard Classifications: Physical Hazards Flammable (gases, aerosols, liquids, or solids) Health Hazards Aspiration Hazard Serious eye damage or eye irritation 15.2. State Regulations Contact manufacturer for more information 15.3. Chemical Inventories The components of this product are in compliance with the new substance notification requirements of CEPA. The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact manufacturer for more information 15.4. International Regulations Contact manufacturer for more information Hybrid Ceramic SiO2 BOOST G2108 10/16/20 Page 10 of 10 This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 3 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 41-7591-5 Version Number: 1.01 Issue Date: 10/16/20 Supercedes Date: 08/26/20 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. Meguiar's Inc. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the Meguiar's Inc. product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a Meguiar's Inc. product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the Meguiar's Inc. product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. Meguiar's Inc. provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, Meguiar's Inc. makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from Meguiar's Inc. Meguiar's, Inc. USA SDSs are available at www.Meguiars.com G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 1 of 7 Safety Data Sheet Copyright,2020, Meguiar's Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's Inc. products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from Meguiar's Inc., and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 41-7593-1 Version Number: 1.01 Issue Date: 08/25/20 Supercedes Date: 07/23/20 SECTION 1: Identification 1.1. Product identifier G2107 Hybrid Ceramic Wash [G210748] Product Identification Numbers LB-1100-2951-7 1.2. Recommended use and restrictions on use Recommended use Automotive 1.3. Supplier?s details MANUFACTURER: Meguiar's, Inc. DIVISION: Meguiar's ADDRESS: 17991 Mitchell South, Irvine, CA 92614, USA Telephone: 949-752-8000 (Fax: 949-752-5784) 1.4. Emergency telephone number CHEMTREC 1-800-424-9300 (24 hours) SECTION 2: Hazard identification 2.1. Hazard classification Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. 2.2. Label elements Signal word Not applicable. Symbols Not applicable. Pictograms Not applicable. G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 2 of 7 SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Non-Hazardous Ingredients 7732-18-5 90 - 100 Trade Secret * *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: No need for first aid is anticipated. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable. SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media Material will not burn. 5.2. Special hazards arising from the substance or mixture None inherent in this product. 5.3. Special protective actions for fire-fighters No special protective actions for fire-fighters are anticipated. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 3 of 7 Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with water. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. 7.2. Conditions for safe storage including any incompatibilities Store away from acids. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits No occupational exposure limit values exist for any of the components listed in Section 3 of this SDS. 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection None required. Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate When only incidental contact is anticipated, alternative glove material(s) may be used. If contact with the glove does occur, remove immediately and replace with a set of new gloves. For incidental contact, gloves made of the following material(s) may be used:Nitrile Rubber Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 4 of 7 SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Milky White Odor Fruity Fragrant Odor threshold No Data Available pH 8.2 - 8.6 Melting point No Data Available Boiling Point 212 ?F Flash Point Flash point > 93 ?C (200 ?F) [Test Method:Pensky-Martens Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure No Data Available Vapor Density No Data Available Specific Gravity 1 Solubility In Water No Data Available Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 4,000 - 8,000 centipoise Volatile Organic Compounds 0.00014 - 0.00017 % weight SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials Strong acids 10.6. Hazardous decomposition products Substance Condition None known. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 5 of 7 reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Eye Contact: Contact with the eyes during product use is not expected to result in significant irritation. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Dermal No data available; calculated ATE >5,000 mg/kg Overall product Ingestion No data available; calculated ATE >5,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation For the component/components, either no data are currently available or the data are not sufficient for classification. Serious Eye Damage/Irritation For the component/components, either no data are currently available or the data are not sufficient for classification. Skin Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity For the component/components, either no data are currently available or the data are not sufficient for classification. Carcinogenicity For the component/components, either no data are currently available or the data are not sufficient for classification. Reproductive Toxicity Reproductive and/or Developmental Effects For the component/components, either no data are currently available or the data are not sufficient for classification. G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 6 of 7 Target Organ(s) Specific Target Organ Toxicity - single exposure For the component/components, either no data are currently available or the data are not sufficient for classification. Specific Target Organ Toxicity - repeated exposure For the component/components, either no data are currently available or the data are not sufficient for classification. Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. SECTION 14: Transport Information General Transportation Statement: This product does not require classification by DOT, IATA, ICAO or IMDG. Please contact the emergency numbers listed on the first page of the SDS for Transportation Information for this material. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact manufacturer for more information EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable Health Hazards Not applicable G2107 Hybrid Ceramic Wash [G210748] 08/25/20 Page 7 of 7 15.2. State Regulations Contact manufacturer for more information 15.3. Chemical Inventories The components of this material are in compliance with the China "Measures on Environmental Management of New Chemical Substance". Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Japan Industrial Safety and Health Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of the Korean Toxic Chemical Control Law. Certain restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling division for additional information. The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact manufacturer for more information 15.4. International Regulations Contact manufacturer for more information This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 1 Flammability: 0 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 41-7593-1 Version Number: 1.01 Issue Date: 08/25/20 Supercedes Date: 07/23/20 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. Meguiar's Inc. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the Meguiar's Inc. product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a Meguiar's Inc. product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the Meguiar's Inc. product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. Meguiar's Inc. provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, Meguiar's Inc. makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from Meguiar's Inc. Meguiar's, Inc. USA SDSs are available at www.Meguiars.com