SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 1 / 10 SECTION 1. IDENTIFICATION Product name : MM BF SILICN DOT5 12/11OZ Product code : M4011/12 Manufacturer or supplier's details Company name of supplier : Niteo Products, LLC Address : Dallas TX 75225 Email Address : This email address is being protected from spambots. You need JavaScript enabled to view it. Telephone : 1-844-696-4836 Emergency telephone num- ber : 1-800-424-9300 / 1-703-741-5970 Recommended use of the chemical and restrictions on use Recommended use : BRAKE FLUID Restrictions on use : Use only outdoors or in a well-ventilated area. SECTION 2. HAZARDS IDENTIFICATION GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR 1910.1200) Carcinogenicity : Category 2 GHS label elements Hazard pictograms : Signal word : Warning Hazard statements : Suspected of causing cancer. Precautionary statements : Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/ protective clothing/ eye protection/ face protection. Response: SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 2 / 10 IF exposed or concerned: Get medical advice/ attention. Storage: Store locked up. Disposal: Dispose of contents/ container to an approved waste disposal plant. Other hazards None known. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance / Mixture : Mixture Hazardous components Chemical name CAS-No. Concentration (% w/w) Tributylphosphate 126-73-8 >= 5 - < 10 Any concentration shown as a range is to protect confidentiality or is due to batch variation. SECTION 4. FIRST AID MEASURES General advice : Move out of dangerous area. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended. If inhaled : If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician. In case of skin contact : If on clothes, remove clothes. Seek medical advice. Remove contaminated clothing. If irritation develops, get med- ical attention. If on skin, rinse well with water. Wash contaminated clothing before re-use. If skin irritation persists, call a physician. In case of eye contact : Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If swallowed : Obtain medical attention. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Most important symptoms and effects, both acute and delayed : Suspected of causing cancer. SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 3 / 10 SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media : Water spray Carbon dioxide (CO2) Unsuitable extinguishing media : High volume water jet Specific hazards during fire- fighting : Do not allow run-off from fire fighting to enter drains or water courses. Hazardous combustion prod- ucts : Carbon oxides Silicon oxides Specific extinguishing meth- ods : Product is compatible with standard fire-fighting agents. Further information : Use extinguishing measures that are appropriate to local cir- cumstances and the surrounding environment. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protec- tive equipment and emer- gency procedures : Use personal protective equipment. Avoid breathing dust. Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Environmental precautions : Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities. Methods and materials for containment and cleaning up : Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. SECTION 7. HANDLING AND STORAGE Advice on protection against fire and explosion : Normal measures for preventive fire protection. Advice on safe handling : Do not breathe vapours/dust. Do not smoke. Avoid contact with skin and eyes. Dispose of rinse water in accordance with local and national SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 4 / 10 regulations. Container hazardous when empty. Smoking, eating and drinking should be prohibited in the ap- plication area. For personal protection see section 8. Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions. Further information on stor- age stability : No decomposition if stored and applied as directed. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value type (Form of exposure) Control parame- ters / Permissible concentration Basis Tributylphosphate 126-73-8 TWA (Inhal- able fraction and vapor) 5 mg/m3 ACGIH TWA 0.2 ppm 2.5 mg/m3 NIOSH REL TWA 5 mg/m3 OSHA Z-1 TWA 0.2 ppm 2.5 mg/m3 OSHA P0 Engineering measures : Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below exposure guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects. Personal protective equipment Respiratory protection : In the case of vapour formation use a respirator with an ap- proved filter. Hand protection Remarks : Wear resistant gloves (consult your safety equipment suppli- er). The suitability for a specific workplace should be dis- cussed with the producers of the protective gloves. Discard gloves that show tears, pinholes, or signs of wear. Eye protection : Not required under normal conditions of use. Wear splash- proof safety goggles if material could be misted or splashed into eyes. Skin and body protection : Choose body protection according to the amount and con- centration of the dangerous substance at the work place. Wear as appropriate: SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 5 / 10 Impervious clothing Safety shoes Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. When using do not smoke. When using do not eat or drink. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : liquid Colour : purple Odour : mild Odour Threshold : not determined pH : not determined : not determined Boiling point/boiling range : > 260 ?C Flash point : > 120 ?C Evaporation rate : not determined Flammability (solid, gas) : not determined Self-ignition : not determined Upper explosion limit / Upper flammability limit : No data available Lower explosion limit / Lower flammability limit : No data available Vapour pressure : 0.985 hPa (25 ?C) Relative vapour density : not determined Density : 8.22 lb/gal Solubility(ies) Water solubility : insoluble Partition coefficient: n- octanol/water : not determined Decomposition temperature : not determined Viscosity Viscosity, dynamic : not determined SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 6 / 10 Viscosity, kinematic : 42.7 mm2/s (40 ?C) Molecular weight : No data available SECTION 10. STABILITY AND REACTIVITY Reactivity : No decomposition if stored and applied as directed. Chemical stability : No decomposition if stored and applied as directed. Possibility of hazardous reac- tions : No decomposition if stored and applied as directed. Hazardous polymerisation does not occur. Conditions to avoid : No data available Incompatible materials : Strong oxidizing agents Strong bases Hazardous decomposition products : Carbon oxides Silicon oxides Formaldehyde SECTION 11. TOXICOLOGICAL INFORMATION Acute toxicity Not classified based on available information. Product: Acute oral toxicity : Acute toxicity estimate: > 5,000 mg/kg Method: Calculation method Acute dermal toxicity : Acute toxicity estimate: 2,404 mg/kg Method: Calculation method Components: Tributylphosphate: Acute oral toxicity : LD50 (Rat, male and female): 1,552 mg/kg Acute inhalation toxicity : LC50 (Rat, male and female): > 4.242 mg/l Exposure time: 4 h Test atmosphere: dust/mist Assessment: The component/mixture is minimally toxic after short term inhalation. Acute dermal toxicity : LD50 (Rabbit, male and female): > 3,100 mg/kg Skin corrosion/irritation Not classified based on available information. SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 7 / 10 Product: Remarks: May irritate skin. Components: Tributylphosphate: Method: OECD Test Guideline 404 Result: Irritating to skin. Serious eye damage/eye irritation Not classified based on available information. Product: Remarks: Vapours may cause irritation to the eyes, respiratory system and the skin. Components: Tributylphosphate: Result: Possibly irritating to eyes Method: OECD Test Guideline 405 Respiratory or skin sensitisation Skin sensitisation Not classified based on available information. Respiratory sensitisation Not classified based on available information. Components: Tributylphosphate: Test Type: Open epicutaneous test Species: Guinea pig Result: Not a skin sensitizer. Germ cell mutagenicity Not classified based on available information. Carcinogenicity Suspected of causing cancer. Components: Tributylphosphate: Carcinogenicity - Assess- ment : Limited evidence of carcinogenicity in animal studies IARC No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. OSHA No component of this product present at levels greater than or SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 8 / 10 equal to 0.1% is on OSHA?s list of regulated carcinogens. NTP No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. Reproductive toxicity Not classified based on available information. STOT - single exposure Not classified based on available information. STOT - repeated exposure Not classified based on available information. Aspiration toxicity Not classified based on available information. Further information Product: Remarks: No data available SECTION 12. ECOLOGICAL INFORMATION Toxicity Additional ecological information : An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Harmful to aquatic life. SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues : Dispose of in accordance with all applicable local, state and federal regulations. Contaminated packaging : Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. SECTION 14. TRANSPORT INFORMATION Dangerous goods descriptions (if indicated below) may not reflect quantity, end-use, or region-specific exceptions that can be applied. Consult shipping documents for descriptions that are specific to the shipment. International Regulations IATA-DGR Not regulated as a dangerous good SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 9 / 10 IMDG-Code Not regulated as a dangerous good Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied. National Regulations 49 CFR Not regulated as a dangerous good 49 CFR Not regulated as a dangerous good SECTION 15. REGULATORY INFORMATION EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity This material does not contain any components with a CERCLA RQ. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 302 Extremely Hazardous Substances Threshold Planning Quantity This material does not contain any components with a section 302 EHS TPQ. SARA 311/312 Hazards : Carcinogenicity SARA 313 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. California Prop. 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm. SAFETY DATA SHEET MOTOR MEDIC? SILICONE BRAKE FLUID DOT 5 Version 2.1 Revision Date: 03/29/2023 SDS Number: 600000001425 Date of last issue: 04/01/2019 Date of first issue: 07/13/2018 10 / 10 SECTION 16. OTHER INFORMATION Further information NFPA: Revision Date : 03/29/2023 The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor- mation and belief at the date of its publication. The information given is designed only as a guid- ance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. US / EN Flammability H e a lt h In s ta b ility 1 1 0 Special hazard