3M? Scratch & Scuff Removal System, 39071, 39071F, 50975 10/17/23 ________________________________________________________________________________________________________ Page 1 of 2 Safety Data Sheet Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 29-5603-5 Version Number: 4.04 Issue Date: 10/17/23 Supercedes Date: 02/25/22 Product identifier 3M? Scratch & Scuff Removal System, 39071, 39071F, 50975 ID Number(s): 60-4550-5579-2, 60-4551-0854-2 7000045524, 7100204244 Recommended use Automotive Supplier's details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included. Please do not separate the component documents from this cover page. The document numbers for components of this product are: 44-4738-9, 44-5614-1, 44-4582-1, 44-6936-7, 44-7326-0 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M? Scratch & Scuff Removal System, 39071, 39071F, 50975 10/17/23 ________________________________________________________________________________________________________ Page 2 of 2 3M USA SDSs are available at www.3M.com 3M? Abrasive Products, Trizact? Hookit?Foam Disc, 443SA; Performance Sandpaper 03056, 03064, 01459 08/01/23 __________________________________________________________________________________________ Page 1 of 4 Article Information Sheet Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administration?s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: ?Article? means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Document Group: 44-5614-1 Version Number: 1.00 Issue Date: 08/01/23 Supercedes Date: Initial Issue SECTION 1: Identification 1.1. Product identifier 3M? Abrasive Products, Trizact? Hookit?Foam Disc, 443SA; Performance Sandpaper 03056, 03064, 01459 1.2. Recommended use and restrictions on use Recommended use Abrasive Product 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Cured Resin None 15 - 65 Polyurethane Foam None 20 - 35 Silicon Carbide Mineral 409-21-2 2 - 25 Hookit Backing None <= 25 Film Backing None <= 15 3M? Abrasive Products, Trizact? Hookit?Foam Disc, 443SA; Performance Sandpaper 03056, 03064, 01459 08/01/23 __________________________________________________________________________________________ Page 2 of 4 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Eye Contact: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. SECTION 5: Fire-fighting measures In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Not applicable. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. 7.2. Conditions for safe storage including any incompatibilities No special storage requirements. SECTION 8: Exposure controls/personal protection This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. No engineering controls or personal protective equipment (PPE) are necessary. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Solid Multicolor 3M? Abrasive Products, Trizact? Hookit?Foam Disc, 443SA; Performance Sandpaper 03056, 03064, 01459 08/01/23 __________________________________________________________________________________________ Page 3 of 4 Odor Odorless Odor threshold Not Applicable pH Not Applicable Melting point Not Applicable Boiling Point Not Applicable Flash Point Not Applicable Evaporation rate Not Applicable Flammability (solid, gas) Not Classified Flammable Limits(LEL) Not Applicable Flammable Limits(UEL) Not Applicable Vapor Pressure Not Applicable Vapor Density Not Applicable Specific Gravity Not Applicable Solubility In Water Not Applicable Solubility- non-water Not Applicable Partition coefficient: n-octanol/ water Not Applicable Autoignition temperature Not Applicable Decomposition temperature Not Applicable Viscosity Not Applicable Molecular weight No Data Available SECTION 10: Stability and reactivity This material is considered to be non reactive under normal use conditions. SECTION 11: Toxicological information Inhalation: No health effects are expected Skin Contact: No health effects are expected Eye Contact: No health effects are expected Ingestion: No health effects are expected SECTION 12: Ecological information This article is expected to present a low environmental risk either because use and disposal are unlikely to result in a significant release of components to the environment or because those components that may be released are expected to have insignificant environmental impact. SECTION 13: Disposal considerations Dispose of contents/container in accordance with the local/regional/national/international regulations. SECTION 14: Transport Information 3M? Abrasive Products, Trizact? Hookit?Foam Disc, 443SA; Performance Sandpaper 03056, 03064, 01459 08/01/23 __________________________________________________________________________________________ Page 4 of 4 Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M transportation classifications are based on product formulation, packaging, 3M policies and 3M understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: Regulatory information Chemical Inventories This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory requirements. SECTION 16: Other information NFPA Hazard Classification Health: 0 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 44-5614-1 Version Number: 1.00 Issue Date: 08/01/23 Supercedes Date: Initial Issue DISCLAIMER: The information in this Article Information Sheet (AIS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the AIS available directly from 3M 3M USA AISs are available at www.3M.com Purple and Black Compound Pads 10/09/23 __________________________________________________________________________________________ Page 1 of 1 Article Information Letter Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 44-7326-0 Version Number: 1.00 Issue Date: 10/09/23 Supercedes Date: Initial Issue Product identifier Purple and Black Compound Pads Recommended use Consumer, buffing Supplier's details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) This Article Information Letter is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administration?s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: ?Article? means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical or health risk to employees. This product, when used under reasonable conditions and in accordance with the directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards. DISCLAIMER: The information in this Article Information Letter (AIL) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the AIL available directly from 3M. 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 1 of 10 Safety Data Sheet Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 44-4738-9 Version Number: 1.00 Issue Date: 08/01/23 Supercedes Date: Initial Issue SECTION 1: Identification 1.1. Product identifier 3M? Scratch Remover, 39070 1.2. Recommended use and restrictions on use Recommended use Automotive 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Flammable Liquid: Category 3. 2.2. Label elements Signal word Warning Symbols Flame | Pictograms 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 2 of 10 Hazard Statements Flammable liquid and vapor. Precautionary Statements General: Keep out of reach of children. Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting equipment. Wear protective gloves and eye/face protection. Response: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. Storage: Store in a well-ventilated place. Keep cool. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt DISTILLATES (PETROLEUM), ACID TREATED, LIGHT 64742-14-9 < 7 Trade Secret * Hydrotreated Light Petroleum Distillates 64742-47-8 < 6 Trade Secret * Isopropyl Alcohol 67-63-0 < 6 Trade Secret * Any remaining components do not contribute to the hazards of this material. *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 3 of 10 Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish. 5.2. Special hazards arising from the substance or mixture Closed containers exposed to heat from fire may build pressure and explode. Hazardous Decomposition or By-Products Substance Condition Hydrocarbons During Combustion Formaldehyde During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Oxides of Nitrogen During Combustion 5.3. Special protective actions for fire-fighters Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Cover spill area with a fire extinguishing foam that is resistant to polar solvents. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible using non-sparking tools. Place in a metal container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 4 of 10 7.1. Precautions for safe handling Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non- sparking tools. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. To minimize the risk of ignition, determine applicable electrical classifications for the process using this product and select specific local exhaust ventilation equipment to avoid flammable vapor accumulation. Ground/bond container and receiving equipment if there is potential for static electricity accumulation during transfer. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store away from heat. Store away from acids. Store away from oxidizing agents. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Kerosine (petroleum) 64742-47-8 ACGIH TWA(as total hydrocarbon vapor, non-aerosol):200 mg/m3 A3: Confirmed animal carcin., SKIN Isopropyl Alcohol 67-63-0 ACGIH TWA:200 ppm;STEL:400 ppm A4: Not class. as human carcin Isopropyl Alcohol 67-63-0 OSHA TWA:980 mg/m3(400 ppm) ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection None required. Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate When only incidental contact is anticipated, alternative glove material(s) may be used. If contact with the glove does occur, 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 5 of 10 remove immediately and replace with a set of new gloves. For incidental contact, gloves made of the following material(s) may be used:Nitrile Rubber Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid White Odor Slight Solvent Odor threshold No Data Available pH 8 Melting point No Data Available Boiling Point 212 ?F Flash Point 111 - 113 ?F [Test Method:Closed Cup] Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure 18 mmHg [@ 20 ?C] Vapor Density No Data Available Density 8.2 - 8.4 lb/gal Specific Gravity 0.98 - 1.00 [Ref Std:WATER=1] Solubility In Water No Data Available Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 12,000 - 18,000 centipoise [Test Method:Brookfield] Hazardous Air Pollutants 0.019 lb HAPS/lb solids [Test Method:Calculated] Volatile Organic Compounds 15.8 % weight [Test Method:calculated per CARB title 2] Volatile Organic Compounds 164 g/l [Test Method:calculated SCAQMD rule 443.1] Percent volatile 81.7 % weight [Test Method:Estimated] VOC Less H2O & Exempt Solvents 462 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 6 of 10 10.4. Conditions to avoid Sparks and/or flames Heat Light 10.5. Incompatible materials Strong oxidizing agents Strong acids 10.6. Hazardous decomposition products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Eye Contact: Contact with the eyes during product use is not expected to result in significant irritation. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Dermal No data available; calculated ATE >5,000 mg/kg Overall product Ingestion No data available; calculated ATE >5,000 mg/kg Isopropyl Alcohol Dermal Rabbit LD50 12,870 mg/kg Isopropyl Alcohol Inhalation- Vapor (4 hours) Rat LC50 72.6 mg/l Isopropyl Alcohol Ingestion Rat LD50 4,710 mg/kg 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 7 of 10 DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Dermal Rabbit LD50 > 2,000 mg/kg DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Ingestion Rat LD50 > 5,000 mg/kg Hydrotreated Light Petroleum Distillates Dermal Rabbit LD50 > 3,160 mg/kg Hydrotreated Light Petroleum Distillates Inhalation- Dust/Mist (4 hours) Rat LC50 > 3 mg/l Hydrotreated Light Petroleum Distillates Ingestion Rat LD50 > 5,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Isopropyl Alcohol Multiple animal species No significant irritation DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Professio nal judgeme nt Mild irritant Hydrotreated Light Petroleum Distillates Rabbit Mild irritant Serious Eye Damage/Irritation Name Species Value Isopropyl Alcohol Rabbit Severe irritant DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Professio nal judgeme nt Mild irritant Hydrotreated Light Petroleum Distillates Rabbit Mild irritant Skin Sensitization Name Species Value Isopropyl Alcohol Guinea pig Not classified DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Guinea pig Not classified Hydrotreated Light Petroleum Distillates Guinea pig Not classified Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity Name Route Value Isopropyl Alcohol In Vitro Not mutagenic Isopropyl Alcohol In vivo Not mutagenic DISTILLATES (PETROLEUM), ACID TREATED, LIGHT In Vitro Not mutagenic Hydrotreated Light Petroleum Distillates In Vitro Not mutagenic Carcinogenicity Name Route Species Value Isopropyl Alcohol Inhalation Rat Some positive data exist, but the data are not sufficient for classification DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Dermal Mouse Some positive data exist, but the data are not sufficient for classification Hydrotreated Light Petroleum Distillates Dermal Mouse Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 8 of 10 Reproductive and/or Developmental Effects Name Route Value Species Test Result Exposure Duration Isopropyl Alcohol Ingestion Not classified for female reproduction Rat NOAEL 1,000 mg/kg/day 2 generation Isopropyl Alcohol Ingestion Not classified for male reproduction Rat NOAEL 500 mg/kg/day 2 generation Isopropyl Alcohol Ingestion Not classified for development Rat NOAEL 400 mg/kg/day during organogenesi s Isopropyl Alcohol Inhalation Not classified for development Rat LOAEL 9 mg/l during gestation Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available Isopropyl Alcohol Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification Human NOAEL Not available Isopropyl Alcohol Inhalation auditory system Not classified Guinea pig NOAEL 13.4 mg/l 24 hours Isopropyl Alcohol Ingestion central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available poisoning and/or abuse DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Inhalation central nervous system depression May cause drowsiness or dizziness Human and animal NOAEL Not available DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification NOAEL Not available DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Ingestion central nervous system depression May cause drowsiness or dizziness Professio nal judgeme nt NOAEL Not available Hydrotreated Light Petroleum Distillates Inhalation central nervous system depression May cause drowsiness or dizziness Human and animal NOAEL Not available Hydrotreated Light Petroleum Distillates Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification NOAEL Not available Hydrotreated Light Petroleum Distillates Ingestion central nervous system depression May cause drowsiness or dizziness Professio nal judgeme nt NOAEL Notavailable Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Isopropyl Alcohol Inhalation kidney and/or bladder Not classified Rat NOAEL 12.3 mg/l 24 months Isopropyl Alcohol Inhalation nervous system Not classified Rat NOAEL 12 mg/l 13 weeks Isopropyl Alcohol Ingestion kidney and/or bladder Not classified Rat NOAEL 400 mg/kg/day 12 weeks Aspiration Hazard Name Value DISTILLATES (PETROLEUM), ACID TREATED, LIGHT Aspiration hazard Hydrotreated Light Petroleum Distillates Aspiration hazard 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 9 of 10 Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. EPA Hazardous Waste Number (RCRA): D001 (Ignitable) SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards Flammable (gases, aerosols, liquids, or solids) Health Hazards Not applicable Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt Isopropyl Alcohol 67-63-0 Trade Secret < 6 15.2. State Regulations Contact 3M for more information. 3M? Scratch Remover, 39070 08/01/23 __________________________________________________________________________________________ Page 10 of 10 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 1 Flammability: 2 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 44-4738-9 Version Number: 1.00 Issue Date: 08/01/23 Supercedes Date: Initial Issue DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M USA SDSs are available at www.3M.com 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 1 of 8 Safety Data Sheet Copyright,2024, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 44-4582-1 Version Number: 2.00 Issue Date: 02/28/24 Supercedes Date: 06/20/23 SECTION 1: Identification 1.1. Product identifier 3M? Auto Care Rubbing Compound 39005 1.2. Recommended use and restrictions on use Recommended use Automotive, Rubbing Compound 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Health Hazard | Pictograms 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 2 of 8 Hazard Statements Causes damage to organs through prolonged or repeated exposure: respiratory system | Precautionary Statements General: Keep out of reach of children. Prevention: Do not breathe dust/fume/gas/mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Response: Get medical advice/attention if you feel unwell. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 1% of the mixture consists of ingredients of unknown acute oral toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Kaolinite 1318-74-7 3 - 7 Any remaining components do not contribute to the hazards of this material. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed Target organ effects following prolonged or repeated exposure. See Section 11 for additional details. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media Non-combustible. Use a fire fighting agent suitable for surrounding fire. 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 3 of 8 5.2. Special hazards arising from the substance or mixture None inherent in this product. 5.3. Special protective actions for fire-fighters No special protective actions for fire-fighters are anticipated. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. 7.2. Conditions for safe storage including any incompatibilities Store away from heat. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Aluminum, insoluble compounds 1318-74-7 ACGIH TWA(respirable fraction):1 mg/m3 A4: Not class. as human carcin ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 4 of 8 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Safety Glasses with side shields Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity. Gloves made from the following material(s) are recommended: Polymer laminate When only incidental contact is anticipated, alternative glove material(s) may be used. If contact with the glove does occur, remove immediately and replace with a set of new gloves. For incidental contact, gloves made of the following material(s) may be used:Nitrile Rubber Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Tan Odor Slight Solvent Odor threshold No Data Available pH 7.5 - 8.5 Melting point Not Applicable Boiling Point 98.3 ?C Flash Point No flash point Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure No Data Available Vapor Density No Data Available Density 1.2 g/ml Specific Gravity 1.2 [Ref Std:WATER=1] Solubility in Water Negligible 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 5 of 8 Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 6,000 - 18,000 centipoise [Test Method:Brookfield] [Details:#6 Spindle] Hazardous Air Pollutants 0.00002 lb HAPS/lb solids [Test Method:Calculated] Molecular weight No Data Available Volatile Organic Compounds 213 g/l [Test Method:calculated SCAQMD rule 443.1] Volatile Organic Compounds 15.2 % weight [Test Method:calculated per CARB title 2] Percent volatile 58.3 % weight VOC Less H2O & Exempt Solvents 415 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Heat Sparks and/or flames 10.5. Incompatible materials None known. 10.6. Hazardous decomposition products Substance Condition Carbon monoxide At Elevated Temperatures Carbon dioxide At Elevated Temperatures SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: May cause additional health effects (see below). Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 6 of 8 Eye Contact: Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Additional Health Effects: Prolonged or repeated exposure may cause target organ effects: Pneumoconiosis: Sign/symptoms may include persistent cough, breathlessness, chest pain, increased amounts of sputum, and changes in lung function tests. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Inhalation- Vapor(4 hr) No data available; calculated ATE >50 mg/l Overall product Ingestion No data available; calculated ATE >5,000 mg/kg Kaolinite Dermal LD50 estimated to be > 5,000 mg/kg Kaolinite Ingestion Human LD50 > 15,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Kaolinite Professio nal judgeme nt No significant irritation Serious Eye Damage/Irritation Name Species Value Kaolinite Professio nal judgeme nt No significant irritation Skin Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. Germ Cell Mutagenicity For the component/components, either no data are currently available or the data are not sufficient for classification. Carcinogenicity Name Route Species Value Kaolinite Inhalation Multiple animal species Not carcinogenic 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 7 of 8 Reproductive Toxicity Reproductive and/or Developmental Effects For the component/components, either no data are currently available or the data are not sufficient for classification. Target Organ(s) Specific Target Organ Toxicity - single exposure For the component/components, either no data are currently available or the data are not sufficient for classification. Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Kaolinite Inhalation pneumoconiosis Causes damage to organs through prolonged or repeated exposure Human NOAEL NA occupational exposure Kaolinite Inhalation pulmonary fibrosis Not classified Rat NOAEL Not available Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. EPA Hazardous Waste Number (RCRA): Not regulated SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 3M? Auto Care Rubbing Compound 39005 02/28/24 __________________________________________________________________________________________ Page 8 of 8 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable Health Hazards Specific target organ toxicity (single or repeated exposure) 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 1 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 44-4582-1 Version Number: 2.00 Issue Date: 02/28/24 Supercedes Date: 06/20/23 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M USA SDSs are available at www.3M.com 3" Disc Pad Adaptor 09/21/23 __________________________________________________________________________________________ Page 1 of 1 Article Information Letter Copyright,2023, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 44-6936-7 Version Number: 1.00 Issue Date: 09/21/23 Supercedes Date: Initial Issue Product identifier 3" Disc Pad Adaptor Recommended use Consumer Supplier's details MANUFACTURER: 3M DIVISION: Construction and Home Improvement Markets ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) This Article Information Letter is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administration?s Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: ?Article? means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical or health risk to employees. This product, when used under reasonable conditions and in accordance with the directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards. DISCLAIMER: The information in this Article Information Letter (AIL) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the AIL available directly from 3M.