Document Library TS Data Sheet 08634 Public Rev:1 Status: Active Effective: 06/27/99 Resealant Data Sheet 3M Part No.(s) 3M Part Descriptor(s) 08634 3M Fax on Demand Identification Number: Description A one part, synthetic rubber based sealer that is used as a supplementary seal on bonded and grommeted windshields and backlites. Features, Advantages, Benefits Features Fast Dryingl Remain Flexiblel Flows Easily into Pinholes, Crevices, and Around Retainer Clips and Blocksl Advantages Benefits Typical Physical Properties Base Synthetic Elastomer Density lbs/Gallon (Appx.) 7.4 lbs/Gallon Color Black Flash Point - ?F 10?F (TCC) Viscosity (CPS) Brookfield Viscometer 150,000 CPS Solids Content (Appx.) 60% Consistency Heavy syrup Solvent Petroleum Distillate Coverage per Gallon 1/8" Bead-1500 ft./1/4" Bead - 375 ft. Product Uses Performance Properties 1 Excellent flow properties allows resealant to seal around clips and setting blocks.l Can be applied in wet conditions.l Handling and Application Information Directions for Use In order to obtain maximum sealing efficiency, the surface to be sealed must be clean and dry. Material can be applied using a hand caulking gun. Applications Supplementary sealer used to seal minor water leaks around bonded and grommeted windshields, backlites and stationary sidelites. The product flows into pinholes and crevices and around retainer clips. Storage and Handling Store at room temperature. Rotate stock on a "first-in-first-out" basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months. Precautionary Information Refer to Product Label and Material Safety Data Sheet for Health and Safety Information before using this product. Country US This document is public. It may be distributed. Important Notice to Purchaser The statements and technical information contained in this technical data sheet are based on tests and data which 3M believes to be reliable, but the accuracy or completeness of such statements and technical information is not guaranteed. 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of application. * If 'Directions for Use' reference P.N.'s 8984, 8986, or 8987, please read below. Federal and local air quality regulations may regulate or prohibit the use of surface preparation and cleanup solvents based on VOC content. Consult your local and Federal air quality regulations for information. When using solvents, use in a well ventilated area. Extinguish all sources of ignition in the work area and observe precautionary measures for handling these materials. Refer to product label and MSDS for P.N. 8984, 8986, or 8987 for detailed precautionary information. LIMITATION OF REMEDIES AND LIABILITY: If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M'S OPTION, SHALL BE TO REFUND THE PURCHASE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability. For Additional Health and Safety Information 2 See Material Safety Data Sheet (Fax on Demand 1-800-305-0419), or call:3M Automotive Aftermarket Division3M Center, Building 223-6N-01 Phone: 877-MMM-CARS (877-666-2277) 3M Fax on Demand Identification Number Reference: Goto Ref Author: Karen A. Licht/US-Corporate/3M/US Tonya L. Frisle/IM-IndMktsGp/3M/US This is the last page 3