? ? Trademark of affiliates of DuPont de Nemours, Inc. Page 1 of 17 SAFETY DATA SHEET SPECIALTY ELECTRONIC MATERIALS UK LIMITED Safety Data Sheet according to Regulation (EC) No 1907/2006 - Annex II Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Date of last issue: 08.02.2022 Print Date: 25.03.2022 SPECIALTY ELECTRONIC MATERIALS UK LIMITED encourages and expects you to read and understand the entire (M)SDS, as there is important information throughout the document. We expect you to follow the precautions identified in this document unless your use conditions would necessitate other appropriate methods or actions. SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifier Product name: MOLYKOTE ? CU-7439 Plus Paste V1 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses: Lubricants and lubricant additives 1.3 Details of the supplier of the safety data sheet COMPANY IDENTIFICATION SPECIALTY ELECTRONIC MATERIALS UK LIMITED KINGS COURT, LONDON ROAD STEVENAGE England SG1 2NG UNITED KINGDOM Customer Information Number: 00800-3876-6838 This email address is being protected from spambots. You need JavaScript enabled to view it. 1.4 EMERGENCY TELEPHONE NUMBER 24-Hour Emergency Contact: +(44)-870-8200418 Local Emergency Contact: +(44)-870-8200418 SECTION 2: HAZARDS IDENTIFICATION 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008: Skin irritation - Category 2 - H315 Eye irritation - Category 2 - H319 Long-term (chronic) aquatic hazard - Category 3 - H412 For the full text of the H-Statements mentioned in this Section, see Section 16. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 2 of 17 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008: Hazard pictograms Signal word: WARNING Hazard statements H315 Causes skin irritation. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Precautionary statements P264 Wash skin thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/ eye protection/ face protection. P332 + P313 If skin irritation occurs: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/ attention. P501 Dispose of contents/ container to an approved waste disposal plant. Supplemental informationThe following percentage of the mixture consists of ingredient(s) with unknown acute inhalation toxicity: 2 % 2.3 Other hazards Endocrine disrupting properties (human health): The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Endocrine disrupting properties (environment): The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 3 of 17 Chemical nature: Inorganic and organic compounds in mineral oil 3.2 Mixtures This product is a mixture. Identification number Component Classification according to Regulation (EU) 1272/2008 (CLP) specific concentration limit/ M-Factors/ Acute toxicity estimate % CASRN 7440-50-8 EC-No. 231-159-6 Index-No. ? REACH No ? Copper metal powder Aquatic Acute 1 - H400 Aquatic Chronic 3 - H412 M-Factor: 1[Acute] Oral ATE: > 2,500 mg/kg Inhalation ATE: > 5.11 mg/l (dust/mist) Dermal ATE: > 2,000 mg/kg >= 10.0 - < 20.0 % CASRN 68187-67-7 EC-No. 269-119-5 Index-No. ? REACH No ? C12-C14-Alkyl amines, isooctyl phosphates Acute Tox. 4 - H302 Acute Tox. 4 - H312 Skin Corr. 1C - H314 Eye Irrit. 1 - H318 Aquatic Acute 1 - H400 Aquatic Chronic 2 - H411 M-Factor: 1[Acute] Oral ATE: 1,000 mg/kg Dermal ATE: 2,000 mg/kg >= 1.0 - < 2.5 % For the full text of the H-Statements mentioned in this Section, see Section 16. SECTION 4: FIRST AID MEASURES 4.1 Description of first aid measures General advice: First Aid responders should pay attention to self-protection and use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to Section 8 for specific personal protective equipment. Inhalation: Move person to fresh air; if effects occur, consult a physician. Skin contact: Wash off with plenty of water. Eye contact: Immediately flush eyes with water; remove contact lenses, if present, after the first 5 minutes, then continue flushing eyes for at least 15 minutes. Obtain medical attention without delay, preferably from an ophthalmologist. Suitable emergency eye wash facility should be immediately available. Ingestion: No emergency medical treatment necessary. 4.2 Most important symptoms and effects, both acute and delayed: Aside from the information found under Description of first aid measures (above) and Indication of immediate medical attention and special treatment needed (below), any additional important symptoms and effects are described in Section 11: Toxicology Information. 4.3 Indication of any immediate medical attention and special treatment needed Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 4 of 17 Notes to physician: No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient. SECTION 5: FIREFIGHTING MEASURES 5.1 Extinguishing media Suitable extinguishing media: Water spray Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical Unsuitable extinguishing media: None known. 5.2 Special hazards arising from the substance or mixture Hazardous combustion products: Metal oxides Carbon oxides Nitrogen oxides (NOx) Unusual Fire and Explosion Hazards: Exposure to combustion products may be a hazard to health. 5.3 Advice for firefighters Fire Fighting Procedures: Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Contain fire water run-off if possible. Fire water run-off, if not contained, may cause environmental damage. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Remove undamaged containers from fire area if it is safe to do so. Evacuate area. Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations. 6.2 Environmental precautions: Do not release the product to the aquatic environment above defined regulatory levels Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained. 6.3 Methods and materials for containment and cleaning up: Wipe up or scrape up and contain for salvage or disposal. Local or national regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases. You will need to determine which regulations are applicable. For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, Sections 13 and 15 of this SDS provide information regarding certain local or national requirements. 6.4 Reference to other sections: See sections: 7, 8, 11, 12 and 13. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 5 of 17 SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling: Do not get on skin or clothing. Do not swallow. Do not get in eyes. Take care to prevent spills, waste and minimize release to the environment. Handle in accordance with good industrial hygiene and safety practice. Use only with adequate ventilation. See Engineering measures under EXPOSURE CONTROLS/PERSONAL PROTECTION section. 7.2 Conditions for safe storage, including any incompatibilities: Keep in properly labelled containers. Store in accordance with the particular national regulations. Do not store with the following product types: Strong oxidizing agents. Unsuitable materials for containers: None known. 7.3 Specific end use(s): Information on specific end use(s) of this product may be provided in a technical data sheet/annex to the SDS (if available). SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable. Component Regulation Type of listing Value Copper metal powder ACGIH TWA Dust and mist 1 mg/m3 , Copper ACGIH TWA Fumes 0.2 mg/m3 , Copper GB EH40 TWA 1 mg/m3 , Copper GB EH40 STEL 2 mg/m3 , Copper GB EH40 TWA 0.2 mg/m3 , Copper Further information: 48: The word 'fume' is often used to include gases and vapours. This is not the case for exposure limits where 'fume' should normally be applied to solid particles generated by chemical reactions or condensed from the gaseous state, usually after volatilisation from melted substances. The generation of fume is often accompanied by a chemical reaction such as oxidation or thermal breakdown.; 2: Where no specific short-term exposure limit is listed, a figure three times the long-term exposure should be used GB EH40 TWA Fumes 0.2 mg/m3 , Copper GB EH40 TWA Dusts and mists 1 mg/m3 , Copper GB EH40 STEL Dusts and mists 2 mg/m3 , Copper Derived No Effect Level Copper metal powder Workers Acute systemic effects Acute local effects Long-term systemic effects Long-term local effects Dermal Inhalation Dermal Inhalation Dermal Inhalation Dermal Inhalation 273 mg/kg bw/day 20 mg/m3 n.a. n.a. 137 mg/kg bw/day n.a. n.a. n.a. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 6 of 17 Consumers Acute systemic effects Acute local effects Long-term systemic effects Long-term local effects Dermal Inhalation Oral Dermal Inhalation Dermal Inhalation Oral Dermal Inhalation 137 mg/kg bw/day 20 mg/m3 n.a. n.a. n.a. 137 mg/kg bw/day n.a. 0.041 mg/kg bw/day n.a. n.a. Predicted No Effect Concentration Copper metal powder Compartment PNEC Fresh water 7.8 ?g/l Marine water 5.2 ?g/l Sewage treatment plant 230 ?g/l Fresh water sediment 87 mg/kg Marine sediment 676 mg/kg Soil 65 mg/kg 8.2 Exposure controls Engineering controls: Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations. Local exhaust ventilation may be necessary for some operations. Individual protection measures Eye/face protection: Use chemical goggles. Skin protection Hand protection: Use gloves chemically resistant to this material. Other protection: Use protective clothing chemically resistant to this material. Selection of specific items such as face shield, boots, apron, or full body suit will depend on the task. Respiratory protection: Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process. For most conditions no respiratory protection should be needed; however, if discomfort is experienced, use an approved air-purifying respirator. Environmental exposure controls See SECTION 7: Handling and storage and SECTION 13: Disposal considerations for measures to prevent excessive environmental exposure during use and waste disposal. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Physical state solid Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 7 of 17 Form paste Colour bronze Odour slight Melting point/freezing point No data available Boiling point or initial boiling point and boiling range No data available Flammability Not classified as a flammability hazard Lower explosion limit and upper explosion limit / flammability limit No data available Flash point > 200 ?C Method: Tag closed cup Auto-ignition temperature No data available Decomposition temperature No data available pH Not applicable Viscosity Viscosity, kinematic No data available Solubility(ies) Water solubility No data available Partition coefficient: n- octanol/water No data available Vapour pressure Not applicable Density and / or relative density Relative density 0.99 Relative vapour density No data available Particle characteristics Particle size No data available 9.2 Other information Explosives Not explosive Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 8 of 17 Oxidizing properties The substance or mixture is not classified as oxidizing. Substances and mixtures, which in contact with water, emit flammable gases The substance or mixture does not emit flammable gases in contact with water. Organic peroxides The substance or mixture is not classified as organic peroxide. Molecular weight No data available NOTE: The physical data presented above are typical values and should not be construed as a specification. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity: Not classified as a reactivity hazard. 10.2 Chemical stability: Stable under normal conditions. 10.3 Possibility of hazardous reactions: Can react with strong oxidizing agents. 10.4 Conditions to avoid: None known. 10.5 Incompatible materials: Oxidizing agents 10.6 Hazardous decomposition products: 1-Butene. SECTION 11: TOXICOLOGICAL INFORMATION Toxicological information appears in this section when such data is available. 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 Acute toxicity Acute toxicity (Acute oral toxicity) Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Acute toxicity estimate, > 2,000 mg/kg Calculation method Acute toxicity (Acute dermal toxicity) Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 9 of 17 Acute toxicity estimate, > 2,000 mg/kg Calculation method Acute toxicity (Acute inhalation toxicity) Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. Skin corrosion/irritation Skin irritation, Category 2 H315: Causes skin irritation. Classification procedure: Calculation method Product test data not available. Refer to component data. Serious eye damage/eye irritation Eye irritation, Category 2 H319: Causes serious eye irritation. Classification procedure: Calculation method Product test data not available. Refer to component data. Respiratory or skin sensitisation Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. Germ cell mutagenicity Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. Carcinogenicity Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. Reproductive toxicity Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Toxicity to reproduction assessment : Product test data not available. Refer to component data. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 10 of 17 Assessment Teratogenicity: Product test data not available. Refer to component data. STOT - single exposure Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. STOT - repeated exposure Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. Aspiration Hazard Not classified Not classified due to lack of data. / Not classified due to data which are conclusive although insufficient for classification. Product test data not available. Refer to component data. COMPONENTS INFLUENCING TOXICOLOGY: Copper metal powder Acute toxicity (Acute oral toxicity) LD50, Rat, > 2,500 mg/kg OECD Test Guideline 423 No deaths occurred at this concentration. Acute toxicity (Acute dermal toxicity) LD50, Rat, > 2,000 mg/kg OECD Test Guideline 402 No deaths occurred at this concentration. Acute toxicity (Acute inhalation toxicity) LC50, Rat, 4 Hour, dust/mist, > 5.11 mg/l OECD Test Guideline 436 No deaths occurred at this concentration. Skin corrosion/irritation Brief contact is essentially nonirritating to skin. Serious eye damage/eye irritation May cause slight eye irritation. May cause slight corneal injury. Respiratory or skin sensitisation Did not cause allergic skin reactions when tested in guinea pigs. For respiratory sensitization: No relevant data found. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 11 of 17 Germ cell mutagenicity In vitro genetic toxicity studies were negative. Animal genetic toxicity studies were negative. Carcinogenicity No relevant data found. Reproductive toxicity Toxicity to reproduction assessment : In animal studies, did not interfere with reproduction. In animal studies, did not interfere with fertility. Assessment Teratogenicity: Did not cause birth defects or any other fetal effects in laboratory animals. STOT - single exposure The substance or mixture is not classified as specific target organ toxicant, single exposure. STOT - repeated exposure Based on available data, repeated exposures are not anticipated to cause significant adverse effects. Aspiration Hazard No aspiration toxicity classification C12-C14-Alkyl amines, isooctyl phosphates Acute toxicity (Acute oral toxicity) LD50, Rat, 1,000 mg/kg Acute toxicity (Acute dermal toxicity) Information given is based on data obtained from similar substances. LD50, Rabbit, 2,000 mg/kg OECD Test Guideline 402 Acute toxicity (Acute inhalation toxicity) The LC50 has not been determined. Skin corrosion/irritation Brief contact may cause skin burns. Symptoms may include pain, severe local redness and tissue damage. Serious eye damage/eye irritation May cause severe eye irritation. Respiratory or skin sensitisation Did not cause allergic skin reactions when tested in guinea pigs. STOT - single exposure The substance or mixture is not classified as specific target organ toxicant, single exposure. 11.2. Information on other hazards Endocrine disrupting properties Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 12 of 17 The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Further information No data available SECTION 12: ECOLOGICAL INFORMATION Ecotoxicological information appears in this section when such data is available. 12.1 Toxicity Copper metal powder Acute toxicity to fish Material is very toxic to aquatic organisms (LC50/EC50/IC50 below 1 mg/L in the most sensitive species). Acute toxicity to aquatic invertebrates EC50, Daphnia magna (Water flea), 48 Hour, 0.792 mg/l Acute toxicity to algae/aquatic plants EC50, Chlorella vulgaris (Fresh water algae), 72 Hour, 0.333 mg/l, OECD Test Guideline 201 C12-C14-Alkyl amines, isooctyl phosphates Acute toxicity to aquatic invertebrates Information given is based on data obtained from similar substances. EC50, Daphnia magna (Water flea), 48 Hour, 17 mg/l, OECD Test Guideline 202 Acute toxicity to algae/aquatic plants Information given is based on data obtained from similar substances. EC50, Pseudokirchneriella subcapitata (green algae), 72 Hour, 0.8 mg/l, OECD Test Guideline 201 Information given is based on data obtained from similar substances. NOEC, Pseudokirchneriella subcapitata (green algae), 72 Hour, 0.32 mg/l, OECD Test Guideline 201 12.2 Persistence and degradability Copper metal powder Biodegradability: Biodegradability is not applicable to inorganic substances. C12-C14-Alkyl amines, isooctyl phosphates Biodegradability: Not readily biodegradable. Biodegradation: 35 % Exposure time: 28 d 12.3 Bioaccumulative potential Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 13 of 17 Copper metal powder Bioaccumulation: No relevant data found. 12.4 Mobility in soil Copper metal powder No relevant data found. 12.5 Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Copper metal powder This substance has not been assessed for persistence, bioaccumulation and toxicity (PBT). C12-C14-Alkyl amines, isooctyl phosphates This substance has not been assessed for persistence, bioaccumulation and toxicity (PBT). 12.6 Endocrine disrupting properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. 12.7 Other adverse effects Copper metal powder This substance is not on the Montreal Protocol list of substances that deplete the ozone layer. C12-C14-Alkyl amines, isooctyl phosphates No relevant data found. SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Waste treatment methods Do not dump into any sewers, on the ground, or into any body of water. This product, when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC. Any disposal practices must be in compliance with all national and provincial laws and any municipal or local by-laws governing hazardous waste. For used, contaminated and residual materials additional evaluations may be required. The definitive assignment of this material to the appropriate EWC group and thus its proper EWC code will depend on the use that is made of this material. Contact the authorized waste disposal services. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 14 of 17 SECTION 14: TRANSPORT INFORMATION Classification for ROAD and Rail transport (ADR/RID): 14.1 UN number or ID number Not applicable 14.2 UN proper shipping name Not regulated for transport 14.3 Transport hazard class(es) Not applicable 14.4 Packing group Not applicable 14.5 Environmental hazards Not considered environmentally hazardous based on available data. 14.6 Special precautions for user No data available. Classification for SEA transport (IMO-IMDG): 14.1 UN number or ID number Not applicable 14.2 UN proper shipping name Not regulated for transport 14.3 Transport hazard class(es) Not applicable 14.4 Packing group Not applicable 14.5 Environmental hazards Not considered as marine pollutant based on available data. 14.6 Special precautions for user No data available. 14.7 Maritime transport in bulk according to IMO instruments Consult IMO regulations before transporting ocean bulk Classification for AIR transport (IATA/ICAO): 14.1 UN number or ID number Not applicable 14.2 UN proper shipping name Not regulated for transport 14.3 Transport hazard class(es) Not applicable 14.4 Packing group Not applicable 14.5 Environmental hazards Not applicable 14.6 Special precautions for user No data available. This information is not intended to convey all specific regulatory or operational requirements/information relating to this product. Transportation classifications may vary by container volume and may be influenced by regional or country variations in regulations. Additional transportation system information can be obtained through an authorized sales or customer service representative. It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material. Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 15 of 17 SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture REACh Regulation (EC) No 1907/2006 This product contains only components that have been either registered, are exempt from registration, are regarded as registered or are not subject to registration according to Regulation (EC) No. 1907/2006 (REACH)., The aforementioned indications of the REACH registration status are provided in good faith and believed to be accurate as of the effective date shown above. However, no warranty, express or implied, is given. It is the buyer?s/user?s responsibility to ensure that his/her understanding of the regulatory status of this product is correct. Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. Listed in Regulation: Not applicable 15.2 Chemical safety assessment No Chemical Safety Assessment has been carried out for this substance/mixture. SECTION 16: OTHER INFORMATION Full text of H-Statements referred to under sections 2 and 3. H302 Harmful if swallowed. H312 Harmful in contact with skin. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H318 Causes serious eye damage. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H411 Toxic to aquatic life with long lasting effects. H412 Harmful to aquatic life with long lasting effects. Classification and procedure used to derive the classification for mixtures according to Regulation (EC) No 1272/2008 Skin Irrit. - 2 - H315 - Calculation method Eye Irrit. - 2 - H319 - Calculation method Aquatic Chronic - 3 - H412 - Calculation method Revision Identification Number: 12018166 / A670 / Issue Date: 09.03.2022 / Version: 5.0 Most recent revision(s) are noted by the bold, double bars in left-hand margin throughout this document. Legend ACGIH USA. ACGIH Threshold Limit Values (TLV) Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 16 of 17 GB EH40 UK. EH40 WEL - Workplace Exposure Limits STEL Short-term exposure limit (15-minute reference period) TWA Long-term exposure limit (8-hour TWA reference period) Acute Tox. Acute toxicity Aquatic Acute Short-term (acute) aquatic hazard Aquatic Chronic Long-term (chronic) aquatic hazard Eye Irrit. Eye irritation Skin Corr. Skin corrosion Full text of other abbreviations ADN - European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways; ADR - Agreement concerning the International Carriage of Dangerous Goods by Road; AIIC - Australian Inventory of Industrial Chemicals; ASTM - American Society for the Testing of Materials; bw - Body weight; CLP - Classification Labelling Packaging Regulation; Regulation (EC) No 1272/2008; CMR - Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for Standardisation; DSL - Domestic Substances List (Canada); ECHA - European Chemicals Agency; EC-Number - European Community number; ECx - Concentration associated with x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule; ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with x% growth rate response; GHS - Globally Harmonized System; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA - International Air Transport Association; IBC - International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory concentration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemical Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Organisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Concentration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships; n.o.s. - Not Otherwise Specified; NO(A)EC - No Observed (Adverse) Effect Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect Loading Rate; NZIoC - New Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Development; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumulative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substances; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals; RID - Regulations concerning the International Carriage of Dangerous Goods by Rail; SADT - Self-Accelerating Decomposition Temperature; SDS - Safety Data Sheet; SVHC - Substance of Very High Concern; TCSI - Taiwan Chemical Substance Inventory; TECI - Thailand Existing Chemicals Inventory; TRGS - Technical Rule for Hazardous Substances; TSCA - Toxic Substances Control Act (United States); UN - United Nations; vPvB - Very Persistent and Very Bioaccumulative Information Source and References This SDS is prepared by Product Regulatory Services and Hazard Communications Groups from information supplied by internal references within our company. SPECIALTY ELECTRONIC MATERIALS UK LIMITED urges each customer or recipient of this (M)SDS to study it carefully and consult appropriate expertise, as necessary or appropriate, to become aware of and understand the data contained in this (M)SDS and any hazards associated with the product. The information herein is provided in good faith and believed to be accurate as of the effective date shown above. However, no warranty, express or implied, is given. Regulatory requirements are subject to change and may differ between various locations. It is the buyer's/user's Product name: MOLYKOTE ? CU-7439 Plus Paste V1 Revision Date: 09.03.2022 Version: 5.0 Page 17 of 17 responsibility to ensure that his activities comply with all federal, state, provincial or local laws. The information presented here pertains only to the product as shipped. Since conditions for use of the product are not under the control of the manufacturer, it is the buyer's/user's duty to determine the conditions necessary for the safe use of this product. Due to the proliferation of sources for information such as manufacturer-specific (M)SDSs, we are not and cannot be responsible for (M)SDSs obtained from any source other than ourselves. If you have obtained an (M)SDS from another source or if you are not sure that the (M)SDS you have is current, please contact us for the most current version. GB COMPANY IDENTIFICATION Workers Skin protection Acute toxicity Carcinogenicity Germ cell mutagenicity Carcinogenicity 12.1 Toxicity Biodegradability: Biodegradability: Bioaccumulation: Legend