SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 1 / 11 SECTION 1. IDENTIFICATION Product name : DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND 000000000001903128 Product code : DCC000004518 Manufacturer or supplier's details Company name of supplier : Dow Corning Corporation Address : South Saginaw Road Midland Michigan 48686 Telephone : (989) 496-6000 Emergency telephone : 24 Hour Emergency Telephone : (989) 496-5900 CHEMTREC : (800) 424-9300 Recommended use of the chemical and restrictions on use Recommended use : Lubricants and lubricant additives SECTION 2. HAZARDS IDENTIFICATION GHS Classification Not a hazardous substance or mixture. GHS Label element Not a hazardous substance or mixture. Other hazards None known. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance / Mixture : Mixture Chemical nature : Inorganic compound Hazardous ingredients Chemical Name CAS-No. Concentration (%) Silicon dioxide 7631-86-9 >= 5 - < 10 SECTION 4. FIRST AID MEASURES If inhaled : If inhaled, remove to fresh air. 10-4064, 12345579 - AQCDelco Dielectric Silicone Grease SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 2 / 11 Get medical attention if symptoms occur. In case of skin contact : Wash with water and soap as a precaution. Get medical attention if symptoms occur. In case of eye contact : Flush eyes with water as a precaution. Get medical attention if irritation develops and persists. If swallowed : If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water. Most important symptoms and effects, both acute and delayed : None known. Protection of first-aiders : No special precautions are necessary for first aid responders. Notes to physician : Treat symptomatically and supportively. SECTION 5. FIRE-FIGHTING MEASURES Suitable extinguishing media : Water spray Alcohol-resistant foam Dry chemical Carbon dioxide (CO2) Unsuitable extinguishing media : None known. Specific hazards during fire fighting : Exposure to combustion products may be a hazard to health. Hazardous combustion prod- ucts : Carbon oxides Silicon oxides Formaldehyde Boron oxides Specific extinguishing meth- ods : Use extinguishing measures that are appropriate to local cir- cumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area. Special protective equipment for fire-fighters : Wear self-contained breathing apparatus for firefighting if nec- essary. Use personal protective equipment. SECTION 6. ACCIDENTAL RELEASE MEASURES SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 3 / 11 Personal precautions, protec- tive equipment and emer- gency procedures : Follow safe handling advice and personal protective equip- ment recommendations. Environmental precautions : Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained. Methods and materials for containment and cleaning up : Soak up with inert absorbent material. For large spills, provide diking or other appropriate contain- ment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill with suitable absor- bent. Local or national regulations may apply to releases and dis- posal of this material, as well as those materials and items employed in the cleanup of releases. You will need to deter- mine which regulations are applicable. Sections 13 and 15 of this SDS provide information regarding certain local or national requirements. SECTION 7. HANDLING AND STORAGE Technical measures : See Engineering measures under EXPOSURE CONTROLS/PERSONAL PROTECTION section. Local/Total ventilation : Use only with adequate ventilation. Advice on safe handling : Handle in accordance with good industrial hygiene and safety practice. Take care to prevent spills, waste and minimize release to the environment. Conditions for safe storage : Keep in properly labeled containers. Store in accordance with the particular national regulations. Materials to avoid : Do not store with the following product types: Strong oxidizing agents SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Ingredients with workplace control parameters Ingredients CAS-No. Value type (Form of exposure) Control parame- ters / Permissible concentration Basis Silicon dioxide 7631-86-9 TWA (Dust) 20 Million particles per cubic OSHA Z-3 SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 4 / 11 foot (Silica) TWA (Dust) 80 mg/m3 / %SiO2 (Silica) OSHA Z-3 TWA 6 mg/m3 (Silica) NIOSH REL Engineering measures : Processing may form hazardous compounds (see section 10). Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations. Personal protective equipment Respiratory protection : No personal respiratory protective equipment normally required. Hand protection Remarks : Wash hands before breaks and at the end of workday. Eye protection : Wear the following personal protective equipment: Safety glasses Skin and body protection : Skin should be washed after contact. Hygiene measures : Ensure that eye flushing systems and safety showers are located close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use. These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may re- quire added precautions. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : Grease Color : white, translucent Odor : slight Odor Threshold : No data available pH : Not applicable Melting point/freezing point : No data available Initial boiling point and boiling range : Not applicable SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 5 / 11 Flash point : > 300 ?C Method: closed cup Evaporation rate : Not applicable Flammability (solid, gas) : Not classified as a flammability hazard Upper explosion limit : No data available Lower explosion limit : No data available Vapor pressure : Not applicable Relative vapor density : No data available Relative density : > 1 Solubility(ies) Water solubility : No data available Partition coefficient: n- octanol/water : No data available Autoignition temperature : No data available Thermal decomposition : No data available Viscosity Viscosity, dynamic : Not applicable Explosive properties : Not explosive Oxidizing properties : The substance or mixture is not classified as oxidizing. Molecular weight : No data available SECTION 10. STABILITY AND REACTIVITY Reactivity : Not classified as a reactivity hazard. Chemical stability : Stable under normal conditions. Possibility of hazardous reac- tions : Use at elevated temperatures may form highly hazardous compounds. Can react with strong oxidizing agents. Hazardous decomposition products will be formed at elevated temperatures. Conditions to avoid : None known. SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 6 / 11 Incompatible materials : Oxidizing agents Hazardous decomposition products Thermal decomposition : Formaldehyde SECTION 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Skin contact Ingestion Eye contact Acute toxicity Not classified based on available information. Ingredients: Silicon dioxide: Acute oral toxicity : LD50 (Rat): > 3,300 mg/kg Assessment: The substance or mixture has no acute oral tox- icity Remarks: Information taken from reference works and the literature. Acute inhalation toxicity : LC50 (Rat): > 2.08 mg/l Exposure time: 4 h Test atmosphere: dust/mist Assessment: The substance or mixture has no acute inhala- tion toxicity Remarks: Information taken from reference works and the literature. Acute dermal toxicity : LD50 (Rabbit): > 5,000 mg/kg Assessment: The substance or mixture has no acute dermal toxicity Remarks: Information taken from reference works and the literature. Skin corrosion/irritation Not classified based on available information. Ingredients: Silicon dioxide: Result: No skin irritation Remarks: Information taken from reference works and the literature. Serious eye damage/eye irritation Not classified based on available information. Ingredients: Silicon dioxide: SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 7 / 11 Result: No eye irritation Remarks: Information taken from reference works and the literature. Respiratory or skin sensitization Skin sensitization: Not classified based on available information. Respiratory sensitization: Not classified based on available information. Ingredients: Silicon dioxide: Assessment: Does not cause skin sensitization. Test Type: Skin: test type not specified Species: Guinea pig Remarks: No known sensitising effect. Information taken from reference works and the literature. Germ cell mutagenicity Not classified based on available information. Ingredients: Silicon dioxide: Genotoxicity in vitro : Result: negative Remarks: Information taken from reference works and the literature. Genotoxicity in vivo : Application Route: Ingestion Result: negative Remarks: Information taken from reference works and the literature. Germ cell mutagenicity- As- sessment : Animal testing did not show any mutagenic effects. Carcinogenicity Not classified based on available information. IARC No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. OSHA No ingredient of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcino- gen by OSHA. NTP No ingredient of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. Reproductive toxicity Not classified based on available information. SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 8 / 11 STOT-single exposure Not classified based on available information. STOT-repeated exposure Not classified based on available information. Aspiration toxicity Not classified based on available information. SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Other adverse effects No data available SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Resource Conservation and Recovery Act (RCRA) : This product has been evaluated for RCRA characteristics and does not meet the criteria of hazardous waste if discarded in its purchased form. Waste from residues : Dispose of in accordance with local regulations. Contaminated packaging : Dispose of as unused product. Empty containers should be taken to an approved waste han- dling site for recycling or disposal. SECTION 14. TRANSPORT INFORMATION International Regulation UNRTDG Not regulated as a dangerous good IATA-DGR Not regulated as a dangerous good IMDG-Code SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 9 / 11 Not regulated as a dangerous good Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied. Domestic regulation 49 CFR Not regulated as a dangerous good SECTION 15. REGULATORY INFORMATION EPCRA - Emergency Planning and Community Right-to-Know CERCLA Reportable Quantity This material does not contain any components with a CERCLA RQ. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 311/312 Hazards : No SARA Hazards SARA 302 : No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. US State Regulations Pennsylvania Right To Know Dimethyl Siloxane, polymers with Methyl Silsesquioxanes 68037-74-1 70 - 90 % Silicon dioxide 7631-86-9 5 - 10 % Silicone Metalloid Complex Proprietary Ingredient 5 - 10 % New Jersey Right To Know Dimethyl Siloxane, polymers with Methyl Silsesquioxanes 68037-74-1 70 - 90 % Silicon dioxide 7631-86-9 5 - 10 % Silicone Metalloid Complex Proprietary Ingredient 5 - 10 % California Prop 65 This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects. The ingredients of this product are reported in the following inventories: NZIoC : All ingredients listed or exempt. SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 10 / 11 REACH : All ingredients (pre-)registered or exempt. TSCA : All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. AICS : All ingredients listed or exempt. IECSC : All ingredients listed or exempt. ENCS/ISHL : All components are listed on ENCS/ISHL or exempted from inventory listing. KECI : All ingredients listed, exempt or notified. PICCS : All ingredients listed or exempt. DSL : This product contains one or more substances which are not on the Canadian Domestic Substances List (DSL). Import of this product into Canada has volume limitations. For volume limits please consult Dow Corning Regulatory Compliance. Inventories AICS (Australia), DSL (Canada), IECSC (China), REACH (European Union), ENCS (Japan), ISHL (Japan), KECI (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) Registration: Trade Secret Component Registration number Silicone Metalloid Complex NJ TSRN 14962700-8471P SAFETY DATA SHEET DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Version 1. 0 Revision Date: 12/17/2014 MSDS Number: 838371-00001 Date of last issue: - Date of first issue: 12/17/2014 11 / 11 SECTION 16. OTHER INFORMATION Further information NFPA: HMIS III: Full text of other abbreviations NIOSH REL : USA. NIOSH Recommended Exposure Limits OSHA Z-3 : USA. Occupational Exposure Limits (OSHA) - Table Z-3 Min- eral Dusts NIOSH REL / TWA : Time-weighted average concentration for up to a 10-hour workday during a 40-hour workweek OSHA Z-3 / TWA : 8-hour time weighted average Sources of key data used to compile the Material Safety Data Sheet : Internal technical data, data from raw material SDSs, OECD eChem Portal search results and European Chemicals Agen- cy, http://echa.europa.eu/ Revision Date : 12/17/2014 The information provided in this Safety Data Sheet is correct to the best of our knowledge, in- formation and belief at the date of its publication. The information is designed only as a guid- ance for safe handling, use, processing, storage, transportation, disposal and release and shall not be considered a warranty or quality specification of any type. The information pro- vided relates only to the specific material identified at the top of this SDS and may not be valid when the SDS material is used in combination with any other materials or in any process, un- less specified in the text. Material users should review the information and recommendations in the specific context of their intended manner of handling, use, processing and storage, in- cluding an assessment of the appropriateness of the SDS material in the user?s end product, if applicable. US / Z8 Flammability H ea lth Instability 0 1 0 FLAMMABILITY PHYSICAL HAZARD HEALTH 1 0 0 Special hazard. 0 = not significant, 1 =Slight, 2 = Moderate, 3 = High 4 = Extreme, * = Chronic