3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 1 of 12 Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 16-5850-9 Version Number: 12.00 Issue Date: 10/29/14 Supercedes Date: 08/22/12 SECTION 1: Identification 1.1. Product identifier 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 Product Identification Numbers 60-9800-4557-3, 60-9800-4558-1, 60-9800-4562-3, 62-5239-0330-0, 62-5239-5236-4 1.2. Recommended use and restrictions on use Recommended use Adhesive Sealant, Sealant 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Industrial Adhesives and Tapes Division ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification 2.1. Hazard classification Respiratory Sensitizer: Category 1. Skin Sensitizer: Category 1. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger Symbols Health Hazard | Pictograms 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 2 of 12 Hazard Statements May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Causes damage to organs through prolonged or repeated exposure: respiratory system | Precautionary Statements General: Keep out of reach of children. Prevention: Do not breathe dust/fume/gas/mist/vapors/spray. In case of inadequate ventilation wear respiratory protection. Wear protective gloves. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Response: IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Get medical advice/attention if you feel unwell. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 2.3. Hazards not otherwise classified None. 1% of the mixture consists of ingredients of unknown acute oral toxicity. 1% of the mixture consists of ingredients of unknown acute dermal toxicity. 3% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Urethane Polymer 51447-37-1 40 - 70 Trade Secret * Titanium Dioxide 13463-67-7 10 - 30 Trade Secret * Fumed Silica 112945-52-5 1 - 5 Trade Secret * p,p'-Methylenebis(Phenyl Isocyanate) 101-68-8 < 2.4 Trade Secret * Zinc Oxide 1314-13-2 < 2.3 Trade Secret * Alkyl Isocyanate Silane 85702-90-5 < 2 Trade Secret * Carbitol Acetate 112-15-2 < 2.0 Trade Secret * Fumed Silica 7631-86-9 0.5 - 1.5 Trade Secret * Heptane 142-82-5 < 0.3 Trade Secret * 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 3 of 12 *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Isocyanates During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Hydrogen Cyanide During Combustion Oxides of Nitrogen During Combustion Toxic Vapor, Gas, Particulate During Combustion 5.3. Special protective actions for fire-fighters No special protective actions for fire-fighters are anticipated. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 4 of 12 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent) on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent material. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Dispose of collected material as soon as possible. SECTION 7: Handling and storage 7.1. Precautions for safe handling Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. 7.2. Conditions for safe storage including any incompatibilities Keep container tightly closed to prevent contamination with water or air. If contamination is suspected, do not reseal container. Store away from amines. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments p,p'-Methylenebis(Phenyl Isocyanate) 101-68-8 ACGIH TWA:0.005 ppm FREE ISOCYANATES 101-68-8 Manufacturer determined TWA:0.005 ppm;STEL:0.02 ppm p,p'-Methylenebis(Phenyl Isocyanate) 101-68-8 OSHA CEIL:0.2 mg/m3(0.02 ppm) SILICA, AMORPHOUS 112945-52- 5 OSHA TWA concentration:0.8 mg/m3;TWA:20 millions of particles/cu. ft. Zinc Oxide 1314-13-2 OSHA TWA(as fume):5 mg/m3;TWA(as total dust):15 mg/m3;TWA(respirable fraction):5 mg/m3 Zinc Oxide 1314-13-2 ACGIH TWA(respirable fraction):2 mg/m3;STEL(respirable fraction):10 mg/m3 Titanium Dioxide 13463-67-7 OSHA TWA(as total dust):15 mg/m3 Titanium Dioxide 13463-67-7 ACGIH TWA:10 mg/m3 A4: Not class. as human carcin Titanium Dioxide 13463-67-7 CMRG TWA(as respirable dust):5 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 5 of 12 mg/m3 Heptane 142-82-5 ACGIH TWA:400 ppm;STEL:500 ppm Heptane 142-82-5 OSHA TWA:2000 mg/m3(500 ppm) SILICA, AMORPHOUS 7631-86-9 OSHA TWA concentration:0.8 mg/m3;TWA:20 millions of particles/cu. ft. Fumed Silica 7631-86-9 CMRG TWA(as respirable dust):3 mg/m3 ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Gloves made from the following material(s) are recommended: Polymer laminate If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an exposure assessment. The following protective clothing material(s) are recommended: Apron - polymer laminate Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties General Physical Form: Liquid Specific Physical Form: Paste Odor, Color, Grade: White thixotropic paste, slight odor Odor threshold No Data Available 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 6 of 12 pH Not Applicable Melting point Not Applicable Boiling Point Not Applicable Flash Point No flash point Evaporation rate No Data Available Flammability (solid, gas) Not Applicable Flammable Limits(LEL) Not Applicable Flammable Limits(UEL) Not Applicable Vapor Pressure No Data Available Vapor Density No Data Available Density 1.3 g/ml Specific Gravity 1.3 [Ref Std: WATER=1] Solubility in Water Nil Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity 100,000 - 500,000 centipoise Hazardous Air Pollutants 2.6 % weight [Test Method: Calculated] Volatile Organic Compounds 38 g/l [Test Method: tested per EPA method 24] [Details: EU VOC content] Percent volatile 2.83 % weight VOC Less H2O & Exempt Solvents 38 g/l [Test Method: tested per EPA method 24] SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials Amines Alcohols Water 10.6. Hazardous decomposition products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 7 of 12 reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. May cause target organ effects after inhalation. Skin Contact: Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Eye Contact: Contact with the eyes during product use is not expected to result in significant irritation. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Target Organ Effects: Prolonged or repeated exposure may cause: Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate, bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure. Carcinogenicity: Ingredient C.A.S. No. Class Description Regulation Titanium Dioxide 13463-67-7 Grp. 2B: Possible human carc. International Agency for Research on Cancer Additional Information: Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Dermal No data available; calculated ATE > 5,000 mg/kg Overall product Inhalation- Vapor(4 hr) No data available; calculated ATE > 50 mg/l Overall product Ingestion No data available; calculated ATE > 5,000 mg/kg Urethane Polymer Ingestion Rat LD50 > 5,000 mg/kg Titanium Dioxide Dermal Rabbit LD50 > 10,000 mg/kg Titanium Dioxide Inhalation- Dust/Mist (4 hours) Rat LC50 > 6.82 mg/l 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 8 of 12 Titanium Dioxide Ingestion Rat LD50 > 10,000 mg/kg Fumed Silica Dermal Rabbit LD50 > 5,000 mg/kg Fumed Silica Inhalation- Dust/Mist (4 hours) Rat LC50 > 0.691 mg/l Fumed Silica Ingestion Rat LD50 > 5,110 mg/kg p,p'-Methylenebis(Phenyl Isocyanate) Inhalation- Vapor LC50 estimated to be 10 - 20 mg/l p,p'-Methylenebis(Phenyl Isocyanate) Dermal Rabbit LD50 > 5,000 mg/kg p,p'-Methylenebis(Phenyl Isocyanate) Inhalation- Dust/Mist (4 hours) Rat LC50 0.369 mg/l p,p'-Methylenebis(Phenyl Isocyanate) Ingestion Rat LD50 31,600 mg/kg Zinc Oxide Dermal LD50 estimated to be > 5,000 mg/kg Zinc Oxide Inhalation- Dust/Mist (4 hours) Rat LC50 > 5.7 mg/l Zinc Oxide Ingestion Rat LD50 > 5,000 mg/kg Carbitol Acetate Dermal Rabbit LD50 15,000 mg/kg Carbitol Acetate Ingestion Rat LD50 11,000 mg/kg Fumed Silica Dermal Rabbit LD50 > 5,000 mg/kg Fumed Silica Inhalation- Dust/Mist (4 hours) Rat LC50 > 0.691 mg/l Fumed Silica Ingestion Rat LD50 > 5,110 mg/kg Heptane Dermal Rabbit LD50 3,000 mg/kg Heptane Inhalation- Vapor (4 hours) Rat LC50 103 mg/l Heptane Ingestion Rat LD50 > 15,000 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Titanium Dioxide Rabbit No significant irritation Fumed Silica Rabbit No significant irritation p,p'-Methylenebis(Phenyl Isocyanate) official classifica tion Irritant Zinc Oxide Human and animal No significant irritation Carbitol Acetate Human and animal Minimal irritation Fumed Silica Rabbit No significant irritation Heptane Human Mild irritant Serious Eye Damage/Irritation Name Species Value Titanium Dioxide Rabbit No significant irritation Fumed Silica Rabbit No significant irritation p,p'-Methylenebis(Phenyl Isocyanate) official classifica tion Severe irritant Zinc Oxide Rabbit Mild irritant Carbitol Acetate Rabbit Mild irritant Fumed Silica Rabbit No significant irritation Heptane Moderate irritant Skin Sensitization Name Species Value Titanium Dioxide Human and animal Not sensitizing Fumed Silica Human Not sensitizing 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 9 of 12 and animal p,p'-Methylenebis(Phenyl Isocyanate) official classifica tion Sensitizing Zinc Oxide Guinea pig Some positive data exist, but the data are not sufficient for classification Carbitol Acetate Human and animal Not sensitizing Fumed Silica Human and animal Not sensitizing Respiratory Sensitization Name Species Value p,p'-Methylenebis(Phenyl Isocyanate) Human Sensitizing Germ Cell Mutagenicity Name Route Value Titanium Dioxide In Vitro Not mutagenic Titanium Dioxide In vivo Not mutagenic Fumed Silica In Vitro Not mutagenic p,p'-Methylenebis(Phenyl Isocyanate) In Vitro Some positive data exist, but the data are not sufficient for classification Zinc Oxide In Vitro Some positive data exist, but the data are not sufficient for classification Zinc Oxide In vivo Some positive data exist, but the data are not sufficient for classification Carbitol Acetate In Vitro Not mutagenic Fumed Silica In Vitro Not mutagenic Heptane In Vitro Not mutagenic Carcinogenicity Name Route Species Value Titanium Dioxide Ingestion Multiple animal species Not carcinogenic Titanium Dioxide Inhalation Rat Carcinogenic Fumed Silica Not Specified Mouse Some positive data exist, but the data are not sufficient for classification p,p'-Methylenebis(Phenyl Isocyanate) Inhalation Rat Some positive data exist, but the data are not sufficient for classification Fumed Silica Not Specified Mouse Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test Result Exposure Duration Fumed Silica Ingestion Not toxic to female reproduction Rat NOAEL 509 mg/kg/day 1 generation Fumed Silica Ingestion Not toxic to male reproduction Rat NOAEL 497 mg/kg/day 1 generation Fumed Silica Ingestion Not toxic to development Rat NOAEL 1,350 mg/kg/day during organogenesi s p,p'-Methylenebis(Phenyl Isocyanate) Inhalation Some positive developmental data exist, but the data are not sufficient for classification Rat NOAEL 0.004 mg/l during organogenesi s Zinc Oxide Ingestion Some positive reproductive/developmental data exist, but the data are not sufficient for classification Multiple animal species NOAEL 125 mg/kg/day premating & during gestation 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 10 of 12 Fumed Silica Ingestion Not toxic to female reproduction Rat NOAEL 509 mg/kg/day 1 generation Fumed Silica Ingestion Not toxic to male reproduction Rat NOAEL 497 mg/kg/day 1 generation Fumed Silica Ingestion Not toxic to development Rat NOAEL 1,350 mg/kg/day during organogenesi s Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration p,p'-Methylenebis(Phenyl Isocyanate) Inhalation respiratory irritation May cause respiratory irritation official classifica tion NOAEL Not available Carbitol Acetate Inhalation central nervous system depression May cause drowsiness or dizziness Human and animal NOAEL Not available not applicable Carbitol Acetate Ingestion central nervous system depression May cause drowsiness or dizziness Multiple animal species NOAEL Not available not applicable Heptane Inhalation central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available Heptane Inhalation respiratory irritation Some positive data exist, but the data are not sufficient for classification Human NOAEL Not available Heptane Ingestion central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Titanium Dioxide Inhalation respiratory system Some positive data exist, but the data are not sufficient for classification Rat LOAEL 0.010 mg/l 2 years Titanium Dioxide Inhalation pulmonary fibrosis All data are negative Human NOAEL Not available occupational exposure Fumed Silica Inhalation respiratory system | silicosis All data are negative Human NOAEL Not available occupational exposure p,p'-Methylenebis(Phenyl Isocyanate) Inhalation respiratory system Causes damage to organs through prolonged or repeated exposure Rat LOAEL 0.004 mg/l 13 weeks Zinc Oxide Ingestion nervous system Some positive data exist, but the data are not sufficient for classification Rat NOAEL 600 mg/kg/day 10 days Zinc Oxide Ingestion endocrine system | hematopoietic system | kidney and/or bladder Some positive data exist, but the data are not sufficient for classification Other NOAEL 500 mg/kg/day 6 months Carbitol Acetate Inhalation respiratory system Some positive data exist, but the data are not sufficient for classification Rat NOAEL 0.48 mg/l 2 weeks Carbitol Acetate Inhalation liver | immune system | kidney and/or bladder All data are negative Rat NOAEL 0.48 mg/l 2 weeks Fumed Silica Inhalation respiratory system | silicosis All data are negative Human NOAEL Not available occupational exposure Heptane Inhalation liver | nervous system | kidney and/or bladder All data are negative Rat NOAEL 12 mg/l 26 weeks Aspiration Hazard Name Value Heptane Aspiration hazard 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 11 of 12 Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. EPA Hazardous Waste Number (RCRA): Not regulated SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt p,p'-Methylenebis(Phenyl Isocyanate) 101-68-8 < 2.4 p,p'-Methylenebis(Phenyl Isocyanate) (Benzene, 1,1'-methylenebis[4-isocyanato-) 101-68-8 < 2.4 p,p'-Methylenebis(Phenyl Isocyanate) (DIISOCYANATES (CERTAIN CHEMICALS ONLY)) 101-68-8 < 2.4 Zinc Oxide (ZINC COMPOUNDS) 1314-13-2 < 2.3 Carbitol Acetate (GLYCOL ETHERS) 112-15-2 < 2.0 3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535 10/29/14 __________________________________________________________________________________________ Page 12 of 12 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 1 Instability: 1 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 16-5850-9 Version Number: 12.00 Issue Date: 10/29/14 Supercedes Date: 08/22/12 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M 3M USA SDSs are available at www.3M.com