SDS Repository

sds

Collection
Penray
Description
 
Tags
Search Tag
Filename
3532.pdf
Source
 
Full Text
PENRAY 75W-90 SYNTHETIC GEAR OIL Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 Date of issue: 12/02/2015 Revision date: 12/02/2015 Version: 1.0 12/02/2015 EN (English) Page 1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Penray Synthetic Gear Oil with Limited Slip Product code : 3532 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Gear Oil 1.3. Details of the supplier of the safety data sheet The Penray Companies, Inc. 440 Denniston Ct. Wheeling, IL 60090 T (800) 373-6729 This email address is being protected from spambots. You need JavaScript enabled to view it. 1.4. Emergency telephone number Emergency number : (800) 373-6729 CHEMTREC (800) 424-9300 CHEMTREC International +1 (703) 527-3887 24 hr SECTION 2: Hazards identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. Label elements GHS-US labelling No labelling applicable 2.3. Other hazards No additional information available 2.4. Unknown acute toxicity (GHS US) Not applicable SECTION 3: Composition/information on ingredients 3.1. Substance Not applicable 3.2. Mixture Name Product identifier % Lubricating oils, petroleum, C15-30, hydrotreated neutral oil-based (CAS No) 72623-86-0 60 - 70 * The exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of ?1910.1200. SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. First-aid measures after skin contact : If irritation occurs, flush skin with plenty of water. Get medical attention if irritation persists. First-aid measures after eye contact : In case of contact, immediately flush eyes with plenty of water. Remove contact lenses, if worn. If irritation persists, get medical attention. First-aid measures after ingestion : If swallowed, do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation : May cause respiratory irritation. Symptoms/injuries after skin contact : May cause skin irritation. Symptoms may include redness, drying, defatting and cracking of the skin. Symptoms/injuries after eye contact : May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling. Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting. Penray Synthetic Gear Oil with Limited Slip Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 12/02/2015 EN (English) 2/5 4.3. Indication of any immediate medical attention and special treatment needed Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where possible). SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Powder, water spray, foam, carbon dioxide. Unsuitable extinguishing media : None known. 5.2. Special hazards arising from the substance or mixture Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, aldehydes, ketones, and combustion products of sulfur and nitrogen. 5.3. Advice for firefighters Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory protection (SCBA). Use water spray to keep fire-exposed containers cool. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to unnecessary and unprotected personnel. 6.2. Methods and material for containment and cleaning up For containment : Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use appropriate Personal Protective Equipment (PPE). Methods for cleaning up : Scoop up material and place in a disposal container. Provide ventilation. 6.3. Reference to other sections See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open container with care. When using do not eat, drink or smoke. Hygiene measures : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in dry, cool, well- ventilated area. 7.3. Specific end use(s) Not available. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Lubricating oils, petroleum, C15-30, hydrotreated neutral oil-based (72623-86-0) ACGIH Not applicable OSHA Not applicable 8.2. Exposure controls Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure limits. Personal protective equipment : Avoid all unnecessary exposure. Hand protection : Wear suitable gloves. For prolonged contact, use nitrile or neoprene gloves or other material resistant to petroleum oils. Eye protection : Safety glasses or goggles are recommended when using product. Skin and body protection : Wear suitable protective clothing. Respiratory protection : Not required for properly ventilated areas. If high levels of vapor or mist should accumulate, use NIOSH approved respirator with organic vapor cartridge. Environmental exposure controls : Maintain levels below Community environmental protection thresholds. Other information : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands carefully before eating or smoking. Handle according to established industrial hygiene and safety practices. Penray Synthetic Gear Oil with Limited Slip Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 12/02/2015 EN (English) 3/5 SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Viscous. Color : Light amber. Odor : Petroleum odor. Odor threshold : No data available pH : No data available Melting point : No data available Freezing point : No data available Boiling point : No data available Flash point : > 182 ?C (> 360 ?F) Relative evaporation rate (butylacetate=1) : No data available Flammability (solid, gas) : Not flammable Explosive limits : No data available Explosive properties : No data available Oxidising properties : No data available Vapor pressure : No data available Relative density : 0.89 Relative vapor density at 20 ?C : No data available Solubility : Insoluble. Partition coefficient: n-octanol/water : No data available Auto-ignition temperature : No data available Decomposition temperature : No data available Viscosity : No data available Viscosity, kinematic : 94.6 cSt @ 40 ?C / 104 ?F Viscosity, dynamic : No data available 9.2. Other information No additional information available SECTION 10: Stability and reactivity 10.1. Reactivity No dangerous reaction known under conditions of normal use. 10.2. Chemical stability Stable under normal storage conditions. 10.3. Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. 10.4. Conditions to avoid Heat. Incompatible materials. Sources of ignition. 10.5. Incompatible materials Strong oxidizing agents. 10.6. Hazardous decomposition products Products of combustion may include, and are not limited to: oxides of carbon, aldehydes, ketones, and combustion products of sulfur and nitrogen. SECTION 11: Toxicological information 11.1. Information on toxicological effects Acute toxicity : Not classified. 3532 LD50 oral rat > 2000 mg/kg LD50 dermal rabbit > 2000 mg/kg LC50 inhalation rat No data available Penray Synthetic Gear Oil with Limited Slip Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 12/02/2015 EN (English) 4/5 Lubricating oils, petroleum, C15-30, hydrotreated neutral oil-based (72623-86-0) LD50 oral rat > 5000 mg/kg LD50 dermal rabbit > 2000 mg/kg Skin corrosion/irritation : Based on available data, the classification criteria are not met. Serious eye damage/irritation : Based on available data, the classification criteria are not met. Respiratory or skin sensitisation : Based on available data, the classification criteria are not met. Germ cell mutagenicity : Based on available data, the classification criteria are not met. Carcinogenicity : Based on available data, the classification criteria are not met. Reproductive toxicity : Based on available data, the classification criteria are not met. Specific target organ toxicity (single exposure) : Based on available data, the classification criteria are not met. Specific target organ toxicity (repeated exposure) : Based on available data, the classification criteria are not met. Aspiration hazard : Based on available data, the classification criteria are not met. Symptoms/injuries after inhalation : May cause respiratory irritation. Symptoms/injuries after skin contact : May cause skin irritation. Symptoms may include redness, drying, defatting and cracking of the skin. Symptoms/injuries after eye contact : May cause eye irritation. Symptoms may include discomfort or pain, excess blinking and tear production, with possible redness and swelling. Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting. SECTION 12: Ecological information 12.1. Toxicity Ecology - general : May cause long-term adverse effects in the aquatic environment. 12.2. Persistence and degradability 3532 Persistence and degradability Not established. 12.3. Bioaccumulative potential 3532 Bioaccumulative potential Not established. 12.4. Mobility in soil No additional information available 12.5. Other adverse effects Effect on the global warming : No known ecological damage caused by this product. SECTION 13: Disposal considerations 13.1. Waste treatment methods Waste disposal recommendations : This material must be disposed of in accordance with all local, state, provincial, and federal regulations. Additional information : Empty containers or liners may retain some product residues. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated for transport Additional information Other information : No supplementary information available. Special transport precautions : Do not handle until all safety precautions have been read and understood. SECTION 15: Regulatory information 15.1. US Federal regulations All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory. Penray Synthetic Gear Oil with Limited Slip Safety Data Sheet according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 12/02/2015 EN (English) 5/5 15.2. US State regulations 3532 State or local regulations This product does not contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm SECTION 16: Other information Date of issue : 12/02/2015 Revision date : 12/02/2015 Other information : None. NFPA health hazard : 0 NFPA fire hazard : 1 NFPA reactivity : 0 Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user?s responsibility to satisfy oneself as to the suitability and completeness of this information for the user?s own particular use.