Universal Adhesive Black 08223 Technical Data Sheet June 2017 3M Part No.(s) 3M Part Descriptor(s) 08223 3M? Universal Adhesive Black Product Description 3M? Universal Adhesive Black is a urethane adhesive designed to bond metal, glass and plastic substrates to each other and themselves. This two-part, high-viscosity adhesive provides excellent gap filling and works on many substrates. 3M? Universal Adhesive Black provides a three minute working time for medium to large sized repairs. Features ? Two-part urethane technology ? 200 ml dual-syringe cartridge ? Metered static mixing Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Container 200 ml dual-syringe cartridge Base Urethane Density lbs/Gallon (Appx.) 10.2 / 10.7 Color Black / White Flash Point - ?F >200?F Viscosity (CPS) Brookfield Viscometer 12,000 - 20,000 Solids Content (Appx.) 100% Consistency Paste Service Temperature - ?F -20?F to 180?F Product Uses 3M? Universal Adhesive Black may be used on multiple substrates and works well to bond and repair mounting brackets on parts such as tail lamps, head lamps, mirrors, and other automotive exterior and interior trim parts. May also be used on industrial and architectural surfaces needing minor repairs. For best results use in conjunction with 3M? Polyolefin Adhesion Promoter (PN 05907) when repairing polyolefin type plastics. Note: Do not apply polyester body filler directly over this product. Use with the following applicators: PN 08571 (manual), PN 08117 (manual), and PN 09930 (pneumatic). 3M? Static Mixing Nozzle: PN 08193 (6/bag), PN 08194 (50/box). For professional use only. Not intended for retail sale. 3M? Universal Adhesive Black 08223 Typical Performance Properties The following times have been determined with ambient air temperature and substrate temperature @ 70?F and are considered typical values. WORK TIME: 3 minutes MIX NOZZLE DWELL TIME: 60 seconds CLAMP TIME: 30 minutes CURE TIME: 4 hours Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Lap Shear, SMC 1185 PSI ASTM D1002 / 2" per minute Lap Shear, FRP 770 PSI ASTM D1002 / 2" per minute Lap Shear, TPO 260 PSI ASTM D1002 / 2" per minute Lap Shear, PP 230 PSI ASTM D1002 / 2" per minute Lap Shear, TEO 190 PSI ASTM D1002 / 2" per minute Overlap shear test method: Overlap shear test for adhesion determined in accordance with ASTM D1002. Sample dimensions 1" x 4" x .0111" with an overlap area of 1/2" x 1". Plastics cleaned with 3M General Purpose Adhesive Cleaner PN 08984 and DA sanded with P80 abrasive. Thermopolyolefin and Polypropylene plastics coated with 3M Polyolefin Adhesion Promoter PN 05907. Directions for Use SURFACE PREPARATION: 1. Wash surface with soap and water to remove water soluble contaminants. Follow the soap and water wash with an appropriate VOC compliant product for removal of surface contaminants. 2. Prime clean, abraded metal surfaces with a two-part primer (epoxy or urethane, NOT acid-etch). 3. Sand plastic surfaces with a grade P80 abrasive. Primed metal surfaces should be scuffed with a Scotch-Brite? General Purpose Hand Pad (Ultrafine), ( PN 07448). 4. Remove dust from surface using clean, un-oiled compressed air and a clean, dry rag. - 2 - 3M? Universal Adhesive Black 08223 Directions for Use (continued) PRODUCT PREPARATION: 1. Insert cartridge into applicator gun. 2. Remove retaining collar and plug from end of cartridge. Discard plug, save retaining collar. 3. Extrude a small amount of product until both parts A and B dispense equally. 4. Attach 3M? Mixing Nozzle (PN 08193) to cartridge and lock in place with retaining collar. CAUTION: Before proceeding with next step have all parts accessible and ready for repair. 5. Dispense a small amount of material and discard. GENERAL REPAIR PROCESS: 1. Apply adhesive to one of the parts and assemble the parts within 3 minutes. 2. Clamp parts together for 30 minutes. NOTE: Allow to cure 1 hour before putting repaired part into service. CLEAN-UP: Unmixed material may be cleaned from most surfaces with an appropriate VOC compliant product. Applications 3M? Universal Adhesive Black is a two-part urethane adhesive designed to bond and seal plastics, primed metals, and glass. May also be used on industrial and architectural surfaces needing minor repairs. For best results use in conjunction with 3M? Polyolefin Adhesion Promoter (PN 05907) when repairing polyolefin type plastics. Storage and Handling STORAGE When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months from the date of manufacture. Keep container tightly closed. Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well ventilated area. HANDLING Avoid eye contact with vapors, mists, or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of vapors, mists or spray. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be under pressure, open carefully. Avoid contact with water to prevent potentially violent reaction or fire. After use, leave mixing nozzle in place to seal the cartridge. - 3 - 3M? Universal Adhesive Black 08223 Precautionary Information Before using this product, please reference Product Label and/or Safety Data Sheet for Health and Safety Information. Note: Laws controlling the acceptable amounts of Volatile Organic Compounds (VOC?s) vary by state, and in some cases by locality. For surface preparation and clean-up activities, consult federal, state and local regulations regarding use of products containing VOCs in your area. Technical Information The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Many factors beyond 3M?s control and uniquely within user?s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user?s method of application. Warranty, Limited Remedy, and Disclaimer Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M?s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Automotive Aftermarket Division 3M Center, Building 223-6N-01 St. Paul, MN 55144-1000 1-877-666-2277 (1-877-MMM-CARS) www.3MCollision.com This is the last page 3M and Scotch-Brite are trademarks of 3M Company. Printed in U.S.A. ?3M 2017 P.N. 08223 (06/17)