SAFETY DATA SHEET Revision Date 29-Mar-2016 Version 2 1. IDENTIFICATION Product identifier Product Name MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Other means of identification Product Code 29132 Synonyms None Recommended use of the chemical and restrictions on use Recommended Use Sealant Uses advised against No information available Details of the supplier of the safety data sheet Company Phone Number 1-87-Permatex (877) 376-2839 24 Hour Emergency Phone Number Chem-Tel: 800-255-3924 International Emergency: 00+1+ 813-248-0585 Contract Number: MIS0003453 E-mail address This email address is being protected from spambots. You need JavaScript enabled to view it. 2. HAZARDS IDENTIFICATION Classification OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute toxicity - Oral Category 4 Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2 Carcinogenicity Category 2 Specific target organ toxicity (repeated exposure) Category 2 Label elements Emergency Overview Manufacturer Address ITW Permatex 6875 Parkland Blvd. Solon, OH 44139 USA Distributor ITW Permatex Canada 35 Brownridge Road, Unit 1 Halton Hills, ON Canada L7G 0C6 Telephone: (800) 924-6994 Flammable liquids Category 3 Danger _____________________________________________________________________________________________ Page 1 / 11 Harmful if swallowed Harmful if inhaled Causes skin irritation Causes serious eye irritation _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Use only outdoors or in a well-ventilated area Wear protective gloves/protective clothing/eye protection/face protection Do not breathe dust/fume/gas/mist/vapors/spray Keep away from heat/sparks/open flames/hot surfaces. - No smoking Keep container tightly closed Take precautionary measures against static discharge Precautionary Statements - Response IF exposed or concerned: Get medical advice/attention Specific treatment (see supplemental first aid instructions on this label) IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower If skin irritation occurs: Get medical advice/attention Wash contaminated clothing before reuse IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell Rinse mouth In case of fire: Use CO2, dry chemical, or foam for extinction Precautionary Statements - Storage Store locked up Store in a well-ventilated place. Keep cool Precautionary Statements - Disposal Dispose of contents/container to an approved waste disposal plant Hazards not otherwise classified (HNOC) Not applicable Other Information - Harmful to aquatic life with long lasting effects Unknown acute toxicity 18.398 % of the mixture consists of ingredient(s) of unknown toxicity 3. COMPOSITION/INFORMATION ON INGREDIENTS substance(s) Suspected of causing cancer May cause damage to organs through prolonged or repeated exposure Flammable liquid and vapor Appearance Gray Physical state Paste _____________________________________________________________________________________________ Page 2 / 11 Odor Aromatic _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 Chemical Name CAS No Weight-% Trade Secret XYLENE 1330-20-7 10 - 30 * 2-BUTOXYETHANOL 111-76-2 10 - 30 * ETHYL BENZENE 100-41-4 3 - 7 * TITANIUM DIOXIDE 13463-67-7 1 - 5 * CARBON TETRACHLORIDE 56-23-5 0.1 - 1 * *The exact percentage (concentration) of composition has been withheld as a trade secret. 4. FIRST AID MEASURES Description of first aid measures General advice Get medical advice/attention if you feel unwell. Eye contact IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin contact IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash with soap and water. If symptoms persist, call a physician. Wash contaminated clothing before reuse. Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If symptoms persist, call a physician. Ingestion IF SWALLOWED:. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician. Self-protection of the first aider Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Most important symptoms and effects, both acute and delayed Symptoms See section 2 for more information. Indication of any immediate medical attention and special treatment needed Note to physicians Treat symptomatically. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Carbon dioxide (CO2), Dry chemical, Foam Unsuitable extinguishing media None. Specific hazards arising from the chemical Flammable. Keep product and empty container away from heat and sources of ignition. Explosion data Sensitivity to Mechanical Impact None. Sensitivity to Static Discharge None. Protective equipment and precautions for firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. 6. ACCIDENTAL RELEASE MEASURES _____________________________________________________________________________________________ Page 3 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 Personal precautions, protective equipment and emergency procedures Personal precautions Use in well ventilated area. Avoid contact with skin, eyes or clothing. Use personal protective equipment as required. Wash thoroughly after handling. Environmental precautions Environmental precautions Do not flush into surface water or sanitary sewer system. See Section 12 for additional ecological Information. Methods and material for containment and cleaning up Methods for containment Prevent further leakage or spillage if safe to do so. Methods for cleaning up Eliminate all ignition sources if safe to do so. Ensure adequate ventilation. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations. 7. HANDLING AND STORAGE Precautions for safe handling Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid breathing vapors or mists. Avoid contact with skin, eyes or clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a cool, well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Incompatible materials Strong oxidizing agents 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Exposure Guidelines . Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH XYLENE 1330-20-7 STEL: 150 ppm TWA: 100 ppm TWA: 100 ppm TWA: 435 mg/m3 (vacated) TWA: 100 ppm (vacated) TWA: 435 mg/m3 (vacated) STEL: 150 ppm (vacated) STEL: 655 mg/m3 - 2-BUTOXYETHANOL 111-76-2 TWA: 20 ppm TWA: 50 ppm TWA: 240 mg/m3 (vacated) TWA: 25 ppm (vacated) TWA: 120 mg/m3 (vacated) S* S* IDLH: 700 ppm TWA: 5 ppm TWA: 24 mg/m3 ETHYL BENZENE 100-41-4 TWA: 20 ppm TWA: 100 ppm TWA: 435 mg/m3 (vacated) TWA: 100 ppm (vacated) TWA: 435 mg/m3 (vacated) STEL: 125 ppm (vacated) STEL: 545 mg/m3 IDLH: 800 ppm TWA: 100 ppm TWA: 435 mg/m3 STEL: 125 ppm STEL: 545 mg/m3 TITANIUM DIOXIDE 13463-67-7 TWA: 10 mg/m3 TWA: 15 mg/m3 total dust (vacated) TWA: 10 mg/m3 total dust IDLH: 5000 mg/m3 CARBON TETRACHLORIDE STEL: 10 ppm TWA: 10 ppm IDLH: 200 ppm _____________________________________________________________________________________________ Page 4 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 56-23-5 TWA: 5 ppm S* (vacated) TWA: 2 ppm (vacated) TWA: 12.6 mg/m3 Ceiling: 25 ppm STEL: 2 ppm 60 min STEL: 12.6 mg/m3 60 min NIOSH IDLH Immediately Dangerous to Life or Health Other Information Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962 (11th Cir., 1992). Appropriate engineering controls Engineering Controls Showers Eyewash stations Ventilation systems Individual protection measures, such as personal protective equipment Eye/face protection Wear safety glasses with side shields (or goggles). Skin and body protection Wear protective natural rubber, nitrile rubber, Neoprene? or PVC gloves. Respiratory protection Use NIOSH-approved air-purifying respirator with organic vapor cartridge or canister, as appropriate. General Hygiene Considerations Handle in accordance with good industrial hygiene and safety practice. Regular cleaning of equipment, work area and clothing is recommended. 9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties Physical state Paste Appearance Gray Odor Aromatic Odor threshold No information available Explosive properties No information available Oxidizing properties No information available Other Information Softening point No information available Property Values Remarks ? Method pH No information available Melting point / freezing point No information available Boiling point / boiling range Flash point 31 ?C / 88 ?F Tag Closed Cup Evaporation rate < 1 Butyl acetate = 1 Flammability (solid, gas) No information available Flammability Limit in Air Upper flammability limit: 7.0% Lower flammability limit: 0.9% Vapor pressure Not Determined Vapor density >1 Air = 1 Relative density 1.189 Water solubility Negligible Solubility in other solvents No information available Partition coefficient No information available Autoignition temperature No information available Decomposition temperature No information available Kinematic viscosity No information available Dynamic viscosity No information available _____________________________________________________________________________________________ Page 5 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 Molecular weight No information available VOC Content (%) 44% Density No information available Bulk density No information available 10. STABILITY AND REACTIVITY Reactivity Chemical stability Stable under recommended storage conditions Possibility of Hazardous Reactions None under normal processing. Conditions to avoid Heat, flames and sparks. Incompatible materials Strong oxidizing agents Hazardous Decomposition Products Carbon oxides Hydrogen chloride Oxides of sulfur Aldehydes 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation May be harmful if inhaled. Eye contact Contact with eyes may cause irritation. May cause redness and tearing of the eyes. Skin contact May cause skin irritation and/or dermatitis. Ingestion May be harmful if swallowed. Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 XYLENE 1330-20-7 = 3500 mg/kg ( Rat ) > 1700 mg/kg ( Rabbit ) > 4350 mg/kg ( Rabbit ) = 29.08 mg/L ( Rat ) 4 h = 5000 ppm ( Rat ) 4 h 2-BUTOXYETHANOL 111-76-2 = 470 mg/kg ( Rat ) = 99 mg/kg ( Rabbit ) = 450 ppm ( Rat ) 4 h ETHYL BENZENE 100-41-4 = 3500 mg/kg ( Rat ) = 15400 mg/kg ( Rabbit ) = 17.2 mg/L ( Rat ) 4 h TITANIUM DIOXIDE 13463-67-7 > 10000 mg/kg ( Rat ) - - CARBON TETRACHLORIDE 56-23-5 = 2350 mg/kg ( Rat ) = 5070 mg/kg ( Rat ) = 8000 ppm ( Rat ) 4 h Information on toxicological effects Symptoms No information available. Delayed and immediate effects as well as chronic effects from short and long-term exposure Sensitization No information available. Germ cell mutagenicity No information available. Carcinogenicity The table below indicates whether each agency has listed any ingredient as a carcinogen. Chemical Name ACGIH IARC NTP OSHA No data available _____________________________________________________________________________________________ Page 6 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 XYLENE 1330-20-7 - Group 3 - - 2-BUTOXYETHANOL 111-76-2 A3 Group 3 - - ETHYL BENZENE 100-41-4 A3 Group 2B - X TITANIUM DIOXIDE 13463-67-7 - Group 2B - X CARBON TETRACHLORIDE 56-23-5 A2 Group 2A Reasonably Anticipated X ACGIH (American Conference of Governmental Industrial Hygienists) A2 - Suspected Human Carcinogen A3 - Animal Carcinogen IARC (International Agency for Research on Cancer) Group 2A - Probably Carcinogenic to Humans Group 2B - Possibly Carcinogenic to Humans Not classifiable as a human carcinogen NTP (National Toxicology Program) Reasonably Anticipated - Reasonably Anticipated to be a Human Carcinogen OSHA (Occupational Safety and Health Administration of the US Department of Labor) X - Present Chronic toxicity May cause adverse effects on the bone marrow and blood-forming system. May cause adverse liver effects. Target Organ Effects Blood, Central nervous system, Eyes, Hematopoietic System, kidney, Liver, Lungs, Respiratory system, Skin. The following values are calculated based on chapter 3.1 of the GHS document . ATEmix (oral) 1831 mg/kg ATEmix (dermal) 2754 mg/kg ATEmix (inhalation-dust/mist) 2.7 mg/l ATEmix (inhalation-vapor) 2629 mg/l 12. ECOLOGICAL INFORMATION Ecotoxicity 46.948 % of the mixture consists of components(s) of unknown hazards to the aquatic environment Chemical Name Algae/aquatic plants Fish Crustacea XYLENE 1330-20-7 - 13.4: 96 h Pimephales promelas mg/L LC50 flow-through 2.661 - 4.093: 96 h Oncorhynchus mykiss mg/L LC50 static 13.5 - 17.3: 96 h Oncorhynchus mykiss mg/L LC50 13.1 - 16.5: 96 h Lepomis macrochirus mg/L LC50 flow-through 19: 96 h Lepomis macrochirus mg/L LC50 7.711 - 9.591: 96 h Lepomis macrochirus mg/L LC50 static 23.53 - 29.97: 96 h Pimephales promelas mg/L LC50 static 780: 96 h Cyprinus carpio mg/L LC50 semi-static 780: 96 h Cyprinus carpio mg/L LC50 30.26 - 40.75: 96 h Poecilia reticulata mg/L LC50 static 3.82: 48 h water flea mg/L EC50 0.6: 48 h Gammarus lacustris mg/L LC50 2-BUTOXYETHANOL 111-76-2 - 1490: 96 h Lepomis macrochirus mg/L LC50 static 2950: 96 h Lepomis macrochirus mg/L LC50 1000: 48 h Daphnia magna mg/L EC50 1698 - 1940: 24 h Daphnia magna mg/L EC50 ETHYL BENZENE 100-41-4 4.6: 72 h Pseudokirchneriella subcapitata mg/L EC50 438: 96 h Pseudokirchneriella subcapitata mg/L EC50 2.6 - 11.3: 72 h Pseudokirchneriella subcapitata mg/L EC50 static 1.7 - 7.6: 96 h Pseudokirchneriella subcapitata 11.0 - 18.0: 96 h Oncorhynchus mykiss mg/L LC50 static 9.6: 96 h Poecilia reticulata mg/L LC50 static 4.2: 96 h Oncorhynchus mykiss mg/L LC50 semi-static 7.55 - 11: 96 h Pimephales promelas mg/L LC50 flow-through 32: 96 h Lepomis 1.8 - 2.4: 48 h Daphnia magna mg/L EC50 _____________________________________________________________________________________________ Page 7 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 mg/L EC50 static macrochirus mg/L LC50 static 9.1 - 15.6: 96 h Pimephales promelas mg/L LC50 static CARBON TETRACHLORIDE 56-23-5 830: 24 h Tetrahymena pyriformis mg/L EC50 36.3 - 47.3: 96 h Pimephales promelas mg/L LC50 flow-through 9.68 - 11.3: 96 h Pimephales promelas mg/L LC50 static 23 - 33: 96 h Lepomis macrochirus mg/L LC50 static 29: 48 h Daphnia magna mg/L EC50 28: 24 h Daphnia magna mg/L EC50 Persistence and degradability No information available. Bioaccumulation No information available. Mobility No information available. Chemical Name Partition coefficient XYLENE 1330-20-7 2.77 - 3.15 2-BUTOXYETHANOL 111-76-2 0.81 ETHYL BENZENE 100-41-4 3.118 CARBON TETRACHLORIDE 56-23-5 2.75 Other adverse effects No information available 13. DISPOSAL CONSIDERATIONS Waste treatment methods Disposal of wastes This material, as supplied, is a hazardous waste according to federal regulations (40 CFR 261). Contaminated packaging Do not reuse container. US EPA Waste Number D001 Chemical Name RCRA RCRA - Basis for Listing RCRA - D Series Wastes RCRA - U Series Wastes XYLENE 1330-20-7 - Included in waste stream: F039 - U239 ETHYL BENZENE 100-41-4 - Included in waste stream: F039 - - CARBON TETRACHLORIDE 56-23-5 - Included in waste streams: F001, F024, F025, F039, K016, K019, K020, K021, K073, K116, K150, K151, K157 0.5 mg/L regulatory level U211 Chemical Name RCRA - Halogenated Organic Compounds RCRA - P Series Wastes RCRA - F Series Wastes RCRA - K Series Wastes CARBON TETRACHLORIDE 56-23-5 Category I - Volatiles - Toxic waste waste number F025 Waste description: Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic Toxic waste waste number K021 Waste description: Aqueous spent antimony catalyst waste from fluoromethanes production. _____________________________________________________________________________________________ Page 8 / 11 _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from one to and including five, with varying amounts and positions of chlorine substitution. This product contains one or more substances that are listed with the State of California as a hazardous waste. Chemical Name California Hazardous Waste Status XYLENE 1330-20-7 Toxic Ignitable ETHYL BENZENE 100-41-4 Toxic Ignitable CARBON TETRACHLORIDE 56-23-5 Toxic 14. TRANSPORT INFORMATION DOT UN/ID no 1133 Proper shipping name: Adhesives, Limited Quantity (LQ) Hazard Class 3 Packing Group III Emergency Response Guide Number 128 IATA UN/ID no ID 8000 Proper shipping name: Consumer commodity Hazard Class 9 ERG Code 9L IMDG UN/ID no 1133 Proper shipping name: Adhesives, Limited Quantity (LQ) Hazard Class 3 Packing Group III EmS-No F-E, S-D 15. REGULATORY INFORMATION International Inventories TSCA Complies DSL/NDSL Complies EINECS/ELINCS Complies ENCS Complies IECSC Complies KECL Complies PICCS Complies AICS Complies Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances _____________________________________________________________________________________________ Page 9 / 11 KECL - Korean Existing and Evaluated Chemical Substances _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 PICCS - Philippines Inventory of Chemicals and Chemical Substances AICS - Australian Inventory of Chemical Substances US Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 Chemical Name SARA 313 - Threshold Values % XYLENE - 1330-20-7 1.0 2-BUTOXYETHANOL - 111-76-2 1.0 ETHYL BENZENE - 100-41-4 0.1 CARBON TETRACHLORIDE - 56-23-5 0.1 CHLOROFORM - 67-66-3 0.1 SARA 311/312 Hazard Categories Acute health hazard Yes Chronic Health Hazard No Fire hazard Yes Sudden release of pressure hazard No Reactive Hazard No CWA (Clean Water Act) This product contains the following substances which are regulated pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42) Chemical Name CWA - Reportable Quantities CWA - Toxic Pollutants CWA - Priority Pollutants CWA - Hazardous Substances XYLENE 1330-20-7 100 lb - - X ETHYL BENZENE 100-41-4 1000 lb X X X CARBON TETRACHLORIDE 56-23-5 10 lb X X X CERCLA This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) Chemical Name Hazardous Substances RQs CERCLA/SARA RQ Reportable Quantity (RQ) XYLENE 1330-20-7 100 lb - RQ 100 lb final RQ RQ 45.4 kg final RQ ETHYL BENZENE 100-41-4 1000 lb - RQ 1000 lb final RQ RQ 454 kg final RQ CARBON TETRACHLORIDE 56-23-5 10 lb 1 lb - RQ 10 lb final RQ RQ 4.54 kg final RQ RQ 1 lb final RQ RQ 0.454 kg final RQ US State Regulations California Proposition 65 This product contains the following Proposition 65 chemicals Chemical Name California Proposition 65 CHLORINATED PARAFFIN - 63449-39-8 Carcinogen ETHYL BENZENE - 100-41-4 Carcinogen TITANIUM DIOXIDE - 13463-67-7 Carcinogen CARBON TETRACHLORIDE - 56-23-5 Carcinogen BUTYL BENZYL PHTHALATE - 85-68-7 Developmental CARBON BLACK - 1333-86-4 Carcinogen CHLOROFORM - 67-66-3 Carcinogen Developmental _____________________________________________________________________________________________ Page 10 / 11 U.S. State Right-to-Know Regulations _____________________________________________________________________________________________ 29132 - MOTO-SEAL 1 ULTIMATE GASKET MAKER GREY 80 ML Revision Date 29-Mar-2016 Chemical Name New Jersey Massachusetts Pennsylvania XYLENE 1330-20-7 X X X 2-BUTOXYETHANOL 111-76-2 X X X ETHYL BENZENE 100-41-4 X X X TITANIUM DIOXIDE 13463-67-7 X X X TALC 14807-96-6 X X X CARBON TETRACHLORIDE 56-23-5 X X X MAGNESIUM OXIDE 1309-48-4 X X X BUTYL BENZYL PHTHALATE 85-68-7 X X X CARBON BLACK 1333-86-4 X X X CHLOROFORM 67-66-3 X X X U.S. EPA Label Information EPA Pesticide Registration Number Not applicable WHMIS Hazard Class B2 - Flammable liquid, D2B - Toxic materials 16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION OF THE LAST REVISION NFPA (National Fire Protection Association) HMIS (Hazardous Material Information System) Revision Date 29-Mar-2016 Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. End of Safety Data Sheet NFPA Health hazards 2 Flammability 3 Instability 0 - HMIS Health hazards 2 Flammability 3 Physical hazards 0 Personal protection B _____________________________________________________________________________________________ Page 11 / 11