SAFETY DATA SHEET 1. Identification Product identifier Synthetic Brake & Caliper Grease Other means of identification Product code 05351, 05352, 05353, 05359 Recommended use Lubricating grease for brakes Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Manufactured or sold by: Company name CRC Industries, Inc. Address 885 Louis Dr. Warminster, PA 18974 US Telephone General Information 215-674-4300 Technical Assistance 800-521-3168 Customer Service 800-272-4620 24-Hour Emergency 800-424-9300 (US) (CHEMTREC) 703-527-3887 (International) Website www.crcindustries.com 2. Hazard(s) identification Not classified.Physical hazards Not classified.Health hazards Not classified.Environmental hazards Not classified.OSHA defined hazards Label elements None.Hazard symbol Signal word None. Hazard statement The mixture does not meet the criteria for classification. Precautionary statement Prevention Observe good industrial hygiene practices. Response Wash hands after handling. Storage Store away from incompatible materials. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information Not applicable. 3. Composition/information on ingredients Mixtures CAS number %Chemical name Common name and synonyms ProprietarySynthetic oil blend 85 - 95 7631-86-9Amorphous silica 1 - 5 7782-42-5Graphite 0.5 - 5 1317-33-5Molybdenum disulphide 0.5 - 5 9002-84-0Polytetrafluoroethylene 0.5 - 5 Specific chemical identity and/or percentage of composition has been withheld as a trade secret. 1 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US 4. First-aid measures Inhalation If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist. Skin contact Rinse skin with water/shower. Get medical attention if irritation develops and persists. Eye contact Rinse with water. Get medical attention if irritation develops and persists. Ingestion Call a POISON CENTER or doctor/physician. Do not induce vomiting. Keep victim warm. Most important symptoms/effects, acute and delayed Direct contact with eyes may cause temporary irritation. Indication of immediate medical attention and special treatment needed Treat symptomatically. General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. 5. Fire-fighting measures Suitable extinguishing media Water fog. Foam. Dry chemicals. Carbon dioxide (CO2). Unsuitable extinguishing media None known. Specific hazards arising from the chemical During fire, gases hazardous to health may be formed. Special protective equipment and precautions for firefighters Treat as oil fire. Wear self-contained breathing apparatus and protective clothing. Fire-fighting equipment/instructions In the event of fire, cool tanks with water spray. General fire hazards No unusual fire or explosion hazards noted. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Remove all possible sources of ignition in the surrounding area. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. For personal protection, see section 8 of the SDS. Methods and materials for containment and cleaning up This product is miscible in water. Stop the flow of material, if this is without risk. Following product recovery, flush area with water. Prevent entry into waterways, sewer, basements or confined areas. For waste disposal, see section 13 of the SDS. Sweep up and shovel into suitable containers for disposal. Residual liquid can be absorbed with inert material. Environmental precautions Avoid discharge into drains, water courses or onto the ground. 7. Handling and storage Precautions for safe handling Avoid breathing vapor. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Provide adequate ventilation. Observe good industrial hygiene practices. For product usage instructions, please see the product label. Conditions for safe storage, including any incompatibilities Store in original tightly closed container. Store in a cool, dry place out of direct sunlight. Store at ambient temperature and atmospheric pressure. Store away from incompatible materials (see Section 10 of the SDS). 8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) ValueComponents FormType PEL 5 mg/m3 Respirable fraction.Graphite (CAS 7782-42-5) 15 mg/m3 Total dust. PEL 15 mg/m3 Total dust.Molybdenum disulphide (CAS 1317-33-5) US. OSHA Table Z-3 (29 CFR 1910.1000) ValueComponents Type TWA 0.8 mg/m3Amorphous silica (CAS 7631-86-9) 20 mppcf 2 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US US. OSHA Table Z-3 (29 CFR 1910.1000) ValueComponents Type TWA 15 mppcfGraphite (CAS 7782-42-5) US. ACGIH Threshold Limit Values ValueComponents FormType TWA 2 mg/m3 Respirable fraction.Graphite (CAS 7782-42-5) TWA 3 mg/m3 Respirable fraction.Molybdenum disulphide (CAS 1317-33-5) 10 mg/m3 Inhalable fraction. US. NIOSH: Pocket Guide to Chemical Hazards ValueComponents FormType TWA 6 mg/m3Amorphous silica (CAS 7631-86-9) TWA 2.5 mg/m3 Respirable.Graphite (CAS 7782-42-5) Biological limit values No biological exposure limits noted for the ingredient(s). Appropriate engineering controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Individual protection measures, such as personal protective equipment Eye/face protection No special eye protection is normally required. Where splashing is possible, wear safety glasses, goggles or face shield. Skin protection Hand protection Wear protective gloves such as: Neoprene. Nitrile. Other Wear suitable protective clothing. Respiratory protection When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Air monitoring is needed to determine actual employee exposure levels. Thermal hazards Wear appropriate thermal protective clothing, when necessary. General hygiene considerations Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 9. Physical and chemical properties Appearance Physical state Solid. Form Grease. Color Black. Odor Mild. Odor threshold Not available. pH Not available. Melting point/freezing point > 550 ?F (> 287.8 ?C) Initial boiling point and boiling range 842 ?F (450 ?C) estimated Flash point 450 ?F (232.2 ?C) Cleveland Open Cup Evaporation rate Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Vapor pressure 201002.5 hPa estimated 3 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US Vapor density Not available. Relative density 0.89 Solubility (water) Not available. Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature 845.6 ?F (452 ?C) estimated Decomposition temperature Not available. Viscosity (kinematic) Not available. Percent volatile Not available. 10. Stability and reactivity Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Chemical stability Material is stable under normal conditions. Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. Conditions to avoid Contact with incompatible materials. Avoid temperatures exceeding the flash point. Incompatible materials Strong oxidizing agents. Welding. Hazardous decomposition products Carbon oxides. Trace fluorine compound and silicon oxides. 11. Toxicological information Information on likely routes of exposure Ingestion Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Inhalation Under normal conditions of intended use, this material is not expected to be an inhalation hazard. In the event it is breathed it as a mist, it may cause irritation of the respiratory track. Skin contact Prolonged skin contact may cause temporary irritation. Eye contact Direct contact with eyes may cause temporary irritation. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Expected to be a low hazard for usual industrial or commercial handling by trained personnel. Skin corrosion/irritation Prolonged skin contact may cause temporary irritation. Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation. Respiratory sensitization Not available. Skin sensitization This product is not expected to cause skin sensitization. Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. IARC Monographs. Overall Evaluation of Carcinogenicity Amorphous silica (CAS 7631-86-9) 3 Not classifiable as to carcinogenicity to humans. Polytetrafluoroethylene (CAS 9002-84-0) 3 Not classifiable as to carcinogenicity to humans. Reproductive toxicity This product is not expected to cause reproductive or developmental effects. Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not likely, due to the form of the product. Chronic effects Prolonged inhalation may be harmful. Further information This product has no known adverse effect on human health. 4 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US 12. Ecological information Ecotoxicity The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Product Test ResultsSpecies Synthetic Brake & Caliper Grease Aquatic LC50Fish 14202.9961 mg/l, 96 hours estimatedFish Components Test ResultsSpecies * Estimates for product may be based on additional component data not shown. Graphite (CAS 7782-42-5) Aquatic Acute LC50Fish > 1800 mg/l, 96 hoursFish Persistence and degradability No data is available on the degradability of this product. Bioaccumulative potential No data available. Mobility in soil No data available. Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations Disposal of waste from residues / unused products This product, in its present state, when discarded or disposed of, is not a hazardous waste according to Federal regulations (40 CFR 261.4 (b)(4)). Under RCRA, it is the responsibility of the user of the product to determine, at the time of disposal, whether the product meets RCRA criteria for hazardous waste. Empty container can be recycled. Consult authorities before disposal. Dispose in accordance with all applicable regulations. Hazardous waste code Not regulated. Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. 15. Regulatory information US federal regulations All components are on the U.S. EPA TSCA Inventory List. TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. SARA 304 Emergency release notification Not regulated. US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. US EPCRA (SARA Title III) Section 313 - Toxic Chemical: Listed substance Not listed. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. CERCLA Hazardous Substances: Reportable quantity Not listed. Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (800-424-8802) and to your Local Emergency Planning Committee. 5 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Safe Drinking Water Act (SDWA) Not regulated. Food and Drug Administration (FDA) Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Section 311/312 Hazard categories Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance No US state regulations US. New Jersey Worker and Community Right-to-Know Act Graphite (CAS 7782-42-5) US. Massachusetts RTK - Substance List Amorphous silica (CAS 7631-86-9) Graphite (CAS 7782-42-5) Molybdenum disulphide (CAS 1317-33-5) US. Pennsylvania Worker and Community Right-to-Know Law Amorphous silica (CAS 7631-86-9) Graphite (CAS 7782-42-5) Polytetrafluoroethylene (CAS 9002-84-0) US. Rhode Island RTK None. US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Volatile organic compounds (VOC) regulations EPA VOC content (40 CFR 51.100(s)) 0.6 % Consumer products (40 CFR 59, Subpt. C) Not regulated State Consumer products Not regulated VOC content (CA) 0.6 % VOC content (OTC) 0.6 % International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory YesPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) 6 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US Country(s) or region Inventory name On inventory (yes/no)* YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision Issue date 07-28-2014 Prepared by Allison Cho Version # 01 Further information Not available. HMIS? ratings Health: 1 Flammability: 1 Physical hazard: 0 Personal protection: B NFPA ratings Health: 1 Flammability: 1 Instability: 0 NFPA ratings 01 1 Disclaimer The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC Industries' knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label. For further clarification of any information contained on this (M)SDS consult your supervisor, a health & safety professional, or CRC Industries. 7 / 7 Material name: Synthetic Brake & Caliper Grease 989 Version #: 01 Issue date: 07-28-2014 SDS US