SDS Repository

sds

Collection
CRC
Description
 
Tags
Search Tag
Filename
14416_Industrial_Strength_Degreaser.pdf
Source
 
Full Text
SAFETY DATA SEEET 1. Identification EydroForce? Industrial Strength DegreaserProduct identifier Other means of identification No. 14416 (Item# 1004972)Product Code General purpose degreaserRecommended use None known.Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufactured or sold byc CRC Industries, Inc.Company name 885 Louis Dr.Address Warminster, PA 18974 US Telephone 215-674-4300General Information 800-521-3168Technical Assistance 800-272-4620Customer Service 800-424-9300 (US)24-Eour Emergency 703-527-3887 (International)(CEEMTREC) www.crcindustries.comWebsite 2. Eazard(s) identification Category 1Corrosive to metalsPhysical hazards Category 4Acute toxicity, inhalationEealth hazards Category 1Skin corrosion/irritation Category 1Serious eye damage/eye irritation Category 1 (gastrointestinal system, respiratory system) Specific target organ toxicity, single exposure Category 2 (respiratory system)Specific target organ toxicity, repeated exposure (inhalation) Category 3Hazardous to the aquatic environment, acute hazard Environmental hazards Category 3Hazardous to the aquatic environment, long-term hazard Not classified.OSEA defined hazards Label elements Signal word Danger Eazard statement May be corrosive to metals. Causes severe skin burns and eye damage. Harmful if inhaled. Causes damage to organs (gastrointestinal system, respiratory system). May cause damage to organs (respiratory system) through prolonged or repeated exposure by inhalation. Harmful to aquatic life. Harmful to aquatic life with long lasting effects. Precautionary statement Prevention Keep container tightly closed. Do not breathe vapor. Use with adequate ventilation. Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying. If you experience any symptoms listed on this label, increase ventilation or leave the area. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment. 1 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US Response If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a poison center/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. If exposed: Call a poison center/doctor. Absorb spillage to prevent material damage. Storage Store locked up. Store in corrosive resistant container. Disposal Dispose of contents/container in accordance with local/regional/national regulations. Eazard(s) not otherwise classified (ENOC) None known. Supplemental information None. 3. Composition/information on ingredients Mixtures CAS number %Chemical name Common name and synonyms 7732-18-5water 70 - 80 1300-72-7sodium xylenesulphonate 5 - 10 68131-39-5alcohols, C12-15, ethoxylated 1 - 3 577-11-7dioctyl sodium sulfosuccinate 1 - 3 34590-94-8dipropylene glycol monomethyl ether 1 - 3 1310-58-3potassium hydroxide 1 - 3 6834-92-0sodium metasilicate 1 - 3 64-02-8tetrasodium ethylenediaminetetraacetate 1 - 3 Specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or artificial respiration if needed. Call a POISON CENTER or doctor/physician if you feel unwell. Inhalation Take off immediately all contaminated clothing. Rinse skin with water/shower. Call a physician or poison control center immediately. Chemical burns must be treated by a physician. Wash contaminated clothing before reuse. Skin contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician or poison control center immediately. Eye contact Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Ingestion Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. Prolonged exposure may cause chronic effects. Most important symptoms/effects, acute and delayed Provide general supportive measures and treat symptomatically. Chemical burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital. Keep victim warm. Keep victim under observation. Symptoms may be delayed. Indication of immediate medical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing media During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions Move containers from fire area if you can do so without risk. 2 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US 6. Accidental release measures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Do not breathe vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures This product is miscible in water. Prevent entry into waterways, sewer, basements or confined areas. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Methods and materials for containment and cleaning up Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground. Environmental precautions 7. Eandling and storage Do not breathe vapor. Do not get in eyes, on skin, or on clothing. Avoid prolonged exposure. When using, do not eat, drink or smoke. Use only outdoors or in a well-ventilated area. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Avoid release to the environment. Observe good industrial hygiene practices. For product usage instructions, see the product label. Precautions for safe handling Store in a cool, dry place out of direct sunlight. Store in corrosive resistant container with a resistant inner liner. Keep container tightly closed. Store in a well-ventilated place. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection Occupational exposure limits US. OSEA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) ValueComponents Type PEL 600 mg/m3dipropylene glycol monomethyl ether (CAS 34590-94-8) 100 ppm US. ACGIE Threshold Limit Values ValueComponents Type STEL 150 ppmdipropylene glycol monomethyl ether (CAS 34590-94-8) TWA 100 ppm Ceiling 2 mg/m3potassium hydroxide (CAS 1310-58-3) US. NIOSEc Pocket Guide to Chemical Eazards ValueComponents Type STEL 900 mg/m3dipropylene glycol monomethyl ether (CAS 34590-94-8) 150 ppm TWA 600 mg/m3 100 ppm Ceiling 2 mg/m3potassium hydroxide (CAS 1310-58-3) No biological exposure limits noted for the ingredient(s).Biological limit values Exposure guidelines US - California OELsc Skin designation dipropylene glycol monomethyl ether (CAS 34590-94-8) Can be absorbed through the skin. US - Tennessee OELsc Skin designation dipropylene glycol monomethyl ether (CAS 34590-94-8) Can be absorbed through the skin. 3 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US US ACGIE Threshold Limit Valuesc Skin designation dipropylene glycol monomethyl ether (CAS 34590-94-8) Can be absorbed through the skin. US NIOSE Pocket Guide to Chemical Eazardsc Skin designation dipropylene glycol monomethyl ether (CAS 34590-94-8) Can be absorbed through the skin. US. OSEA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) dipropylene glycol monomethyl ether (CAS 34590-94-8) Can be absorbed through the skin. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower should be available when handling this product. Appropriate engineering controls Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles).Eye/face protection Skin protection Wear protective gloves such as: Nitrile. Rubber.Eand protection Wear appropriate chemical resistant clothing.Other If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels. Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Liquid.Physical state Liquid.Form Red.Color Pleasant.Odor Odor threshold Not available. pE 13.1 Melting point/freezing point -112 ?F (-80 ?C) estimated Initial boiling point and boiling range 212 ?F (100 ?C) estimated Flash point None. Evaporation rate Slow. Not available.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) 1.1 % estimated Flammability limit - upper (%) 36 % estimated Vapor pressure 18.4 hPa estimated Vapor density Not available. Relative density 1.09 Solubility(ies) Solubility (water) Soluble. Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature 404.6 ?F (207 ?C) estimated Decomposition temperature Not available. Percent volatile 80.5 % estimated 4 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US 10. Stability and reactivity Reacts violently with strong acids. This product may react with oxidizing agents. May be corrosive to metals. Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions Contact with incompatible materials. Do not mix with other chemicals.Conditions to avoid Acids. Oxidizing agents. Metals.Incompatible materials Aldehydes. Ketones. Organic acids.Eazardous decomposition products 11. Toxicological information Information on likely routes of exposure Inhalation Harmful if inhaled. May cause damage to organs by inhalation. May cause damage to organs through prolonged or repeated exposure by inhalation. Skin contact Causes severe skin burns. Eye contact Causes serious eye damage. Ingestion Causes digestive tract burns. Symptoms related to the physical, chemical and toxicological characteristics Burning pain and severe corrosive skin damage. Causes serious eye damage. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. Information on toxicological effects Acute toxicity Harmful if inhaled. Test ResultsComponents Species alcohols, C12-15, ethoxylated (CAS 68131-39-5) Dermal Acute LD50 Rabbit < 5000 mg/kg Oral LD50 Rat 1600 - 2700 mg/kg dipropylene glycol monomethyl ether (CAS 34590-94-8) Dermal Acute LD50 Rabbit 9510 mg/kg Inhalation LC50 Rat 552 ppm Oral LD50 Rat 5135 mg/kg potassium hydroxide (CAS 1310-58-3) Oral Acute LD50 Rat 273 mg/kg sodium metasilicate (CAS 6834-92-0) Oral Acute LD50 Rat 1280 mg/kg sodium xylenesulphonate (CAS 1300-72-7) Dermal Acute LD50 Rabbit > 2000 mg/kg Oral LD50 Rat > 3356 mg/kg 5 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US Test ResultsComponents Species tetrasodium ethylenediaminetetraacetate (CAS 64-02-8) Oral Acute LD50 Rat > 2000 mg/kg Causes severe skin burns and eye damage.Skin corrosion/irritation Causes serious eye damage.Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity Not classifiable as to carcinogenicity to humans. IARC Monographs. Overall Evaluation of Carcinogenicity Not listed. OSEA Specifically Regulated Substances (29 CFR 1910.1001-1052) Not regulated. US. National Toxicology Program (NTP) Report on Carcinogens Not listed. This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure Causes damage to organs (gastrointestinal system, respiratory system). Specific target organ toxicity - repeated exposure May cause damage to organs (respiratory system) through prolonged or repeated exposure by inhalation. Aspiration hazard Not an aspiration hazard. Chronic effects May cause damage to organs through prolonged or repeated exposure. Prolonged inhalation may be harmful. 12. Ecological information Harmful to aquatic life with long lasting effects.Ecotoxicity Components Test ResultsSpecies alcohols, C12-15, ethoxylated (CAS 68131-39-5) Aquatic Acute EC50Crustacea 0.4 - 0.75 mg/l, 48 hoursWater flea (Daphnia magna) LC50Fish 2.7 mg/l, 96 hoursFathead minnow (Pimephales promelas) dioctyl sodium sulfosuccinate (CAS 577-11-7) Aquatic LC50Fish 20 - 40 mg/l, 96 hoursRainbow trout,donaldson trout (Oncorhynchus mykiss) dipropylene glycol monomethyl ether (CAS 34590-94-8) Aquatic Acute EC50Crustacea > 5000 mg/l, 48 hoursDaphnia LC50Fish 10000 mg/l, 96 hoursFathead minnow (Pimephales promelas) potassium hydroxide (CAS 1310-58-3) Aquatic LC50Fish 80 mg/l, 96 hoursWestern mosquitofish (Gambusia affinis) sodium metasilicate (CAS 6834-92-0) Aquatic EC50Crustacea 0.28 - 0.57 mg/l, 48 hoursWater flea (Ceriodaphnia dubia) LC50Fish 1800 mg/l, 96 hoursWestern mosquitofish (Gambusia affinis) 6 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US Components Test ResultsSpecies sodium xylenesulphonate (CAS 1300-72-7) Aquatic Acute EC50Crustacea > 1020 mg/l, 48 hoursWater flea (Daphnia magna) tetrasodium ethylenediaminetetraacetate (CAS 64-02-8) Aquatic LC50Fish > 100 mg/l, 96 hoursBluegill (Lepomis macrochirus) Acute EC50Crustacea > 100 mg/l, 48 hoursInvertebrates (Invertebrates) No data is available on the degradability of any ingredients in the mixture. Persistence and degradability Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations D002: Waste Corrosive material [pH <=2 or =>12.5, or corrosive to steel]Eazardous waste code Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Contaminated packaging If discarded, this product is considered a RCRA corrosive waste, D002. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose in accordance with all applicable regulations. Disposal instructions 14. Transport information DOT UN1760UN number Corrosive liquids, n.o.s. (potassium hydroxide RQ = 55556 LBS, sodium metasilicate)UN proper shipping name 8Class Transport hazard class(es) -Subsidiary risk 8Label(s) IIPacking group Read safety instructions, SDS and emergency procedures before handling.Special precautions for user B2, IB2, T11, TP2, TP27Special provisions 154Packaging exceptions 202Packaging non bulk 242Packaging bulk IATA UN1760UN number Corrosive liquids, n.o.s. (potassium hydroxide, sodium metasilicate)UN proper shipping name 8Class Transport hazard class(es) -Subsidiary risk IIPacking group 8LERG Code Read safety instructions, SDS and emergency procedures before handling.Special precautions for user Allowed with restrictions.Passenger and cargo aircraft Other information Allowed with restrictions.Cargo aircraft only IMDG UN1760UN number CORROSIVE LIQUID, N.O.S. (potassium hydroxide, sodium metasilicate)UN proper shipping name 8Class Transport hazard class(es) 7 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US -Subsidiary risk IIPacking group No.Marine pollutant Environmental hazards F-A, S-BEmS Read safety instructions, SDS and emergency procedures before handling.Special precautions for user 15. Regulatory information This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. SARA 304 Emergency release notification Not regulated. OSEA Specifically Regulated Substances (29 CFR 1910.1001-1052) Not regulated. US EPCRA (SARA Title III) Section 313 - Toxic Chemicalc Listed substance Not regulated. CERCLA Eazardous Substance List (40 CFR 302.4) potassium hydroxide (CAS 1310-58-3) Listed. CERCLA Eazardous Substancesc Reportable quantity potassium hydroxide (CAS 1310-58-3) 1000 LBS Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (800-424-8802) and to your Local Emergency Planning Committee. Other federal regulations Clean Air Act (CAA) Section 112 Eazardous Air Pollutants (EAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) Not regulated.Food and Drug Administration (FDA) Superfund Amendments and Reauthorization Act of 1986 (SARA) Corrosive to metal Acute toxicity (any route of exposure) Skin corrosion or irritation Serious eye damage or eye irritation Specific target organ toxicity (single or repeated exposure) Classified hazard categories SARA 302 Extremely hazardous substance Not listed. SARA 313 (TRI reporting) Not regulated. US state regulations US. New Jersey Worker and Community Right-to-Know Act dipropylene glycol monomethyl ether (CAS 34590-94-8) potassium hydroxide (CAS 1310-58-3) US. Massachusetts RTK - Substance List dipropylene glycol monomethyl ether (CAS 34590-94-8) potassium hydroxide (CAS 1310-58-3) US. Pennsylvania Worker and Community Right-to-Know Law dipropylene glycol monomethyl ether (CAS 34590-94-8) potassium hydroxide (CAS 1310-58-3) US. Rhode Island RTK dipropylene glycol monomethyl ether (CAS 34590-94-8) 8 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US potassium hydroxide (CAS 1310-58-3) California Proposition 65 Cancer and Reproductive Harm - www.P65Warnings.ca.govWARNINGc California Proposition 65 - CRTc Listed date/Carcinogenic substance formaldehyde (CAS 50-00-0) Listed: January 1, 1988 California Proposition 65 - CRTc Listed date/Developmental toxin methanol (CAS 67-56-1) Listed: March 16, 2012 Volatile organic compounds (VOC) regulations EPA VOC content (40 CFR 51.100(s)) 0.8 % (at minimum dilution) 8.2 % (concentrate) Not regulatedConsumer products (40 CFR 59, Subpt. C) State This product is regulated as a General Purpose Degreaser (non-aerosol). This product is compliant for use in all 50 states. Consumer products VOC content (CA) 0.4 % (at minimum dilution) 4 % (concentrate) VOC content (OTC) 0.4 % (at minimum dilution) 4 % (concentrate) International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) NoEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) NoNew Zealand New Zealand Inventory YesPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) NoTaiwan Taiwan Toxic Chemical Substances (TCS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision 02-02-2015Issue date 04-03-2018Revision date Allison YoonPrepared by Version # 02 CRC # 433E/1002414Further information The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC's knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label. For further clarification of any information contained on this (M)SDS consult your supervisor, a health & safety professional, or CRC Industries, Inc.. Disclaimer This document has undergone significant changes and should be reviewed in its entirety.Revision information 9 / 9 Material name: HydroForce? Industrial Strength Degreaser No. 14416 (Item# 1004972) Version #: 02 Revision date: 04-03-2018 Issue date: 02-02-2015 SDS US