SAFETY DATA SHEET 1. Identification API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140Product identifier Other means of identification SL2432, SL2433, SL2435Product code Gear oilRecommended use None known.Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufactured or sold by: Company name CRC Industries, Inc. Address 885 Louis Dr. Warminster, PA 18974 US Telephone General Information 215-674-4300 Technical Assistance 800-521-3168 Customer Service 800-272-4620 24-Hour Emergency 800-424-9300 (US) (CHEMTREC) 703-527-3887 (International) Website www.crcindustries.com 2. Hazard(s) identification Not classified.Physical hazards Not classified.Health hazards Not classified.Environmental hazards Not classified.OSHA defined hazards Label elements None.Hazard symbol Signal word None. Hazard statement The mixture does not meet the criteria for classification. Precautionary statement Prevention Use with adequate ventilation. Open doors and windows or use other means to ensure a fresh air supply during use. Observe good industrial hygiene practices. Response Wash hands after handling. Storage Store away from incompatible materials. Disposal Dispose of waste and residues in accordance with local authority requirements. Hazard(s) not otherwise classified (HNOC) None known. 3. Composition/information on ingredients Mixtures CAS number %Common name and synonymsChemical name MixtureMineral oil 90 - 100 Specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur. If inhalation of a large amount does occur, call a physician immediately. Inhalation 1 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US Wash off with plenty of water. Remove and isolate contaminated clothing and shoes. Get medical attention if irritation develops and persists. Wash contaminated clothing before reuse. Skin contact Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Continue rinsing. Get medical attention if irritation develops and persists. Eye contact Rinse mouth. Drink 1 or 2 glasses of water. Do not induce vomiting without advice from poison control center. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention if symptoms occur. If ingestion of a large amount does occur, call a poison control center immediately. Ingestion Direct contact with eyes may cause temporary irritation.Most important symptoms/effects, acute and delayed Treat symptomatically.Indication of immediate medical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Use fire-extinguishing media appropriate for surrounding materials.Suitable extinguishing media None known.Unsuitable extinguishing media During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions Cool containers exposed to heat with water spray and remove container, if no risk is involved. No unusual fire or explosion hazards noted.General fire hazards 6. Accidental release measures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures The product is immiscible with water and will spread on the water surface. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Prevent entry into waterways, sewer, basements or confined areas. Methods and materials for containment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions 7. Handling and storage Wear appropriate personal protective equipment. Avoid prolonged or repeated contact with skin. Avoid prolonged exposure. Use only in well-ventilated areas. When using, do not eat, drink or smoke. Wash contaminated clothing before reuse. Use appropriate container to avoid environmental contamination. For product usage instructions, please see the product label. Precautions for safe handling Keep away from heat and sources of ignition. Store in a cool, dry place out of direct sunlight. Store in a well-ventilated place. Keep container tightly closed. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection No exposure limits noted for ingredient(s).Occupational exposure limits No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Appropriate engineering controls 2 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles).Eye/face protection Skin protection Wear protective gloves such as: Nitrile. Polyvinyl chloride (PVC).Hand protection Wear suitable protective clothing.Other If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels. Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Liquid.Physical state Liquid.Form Amber.Color Petroleum.Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point 410 - 700 ?F (210 - 371.1 ?C) Cleveland Open Cup Evaporation rate Slow. Not available.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Vapor pressure Not available. Vapor density > 1 (air = 1) Relative density 0.88 - 0.92 Solubility (water) Insoluble. Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature Not available. Decomposition temperature Not available. Viscosity (kinematic) 320 mm?/s (104 ?F (40 ?C)) Percent volatile > 90 % 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions Contact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials Carbon oxides.Hazardous decomposition products 3 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged or excessive inhalation may cause respiratory tract irritation. Skin contact Prolonged skin contact may cause temporary irritation. Repeated exposure may cause skin dryness or cracking. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion May cause vomiting, diarrhea or gastrointestinal discomfort. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Test ResultsProduct Species API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 Dermal Acute LD50 Rabbit > 2000 mg/kg Inhalation LC50 Rat > 20 mg/l, 4 hours Oral * Estimates for product may be based on additional component data not shown. LD50 Rat > 2000 mg/kg Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritation Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. IARC Monographs. Overall Evaluation of Carcinogenicity Not available. US. National Toxicology Program (NTP) Report on Carcinogens Not available. This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not available. Chronic effects Prolonged inhalation may be harmful. Further information This product has no known adverse effect on human health. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Ecotoxicity No data is available on the degradability of this product.Persistence and degradability No data available.Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 4 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US 13. Disposal considerations This product is not a RCRA hazardous waste (See 40 CFR Part 261.20 ? 261.33). Empty containers may be recycled. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. Disposal of waste from residues / unused products Not regulated.Hazardous waste code Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Contaminated packaging 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. 15. Regulatory information This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. All components are on the U.S. EPA TSCA Inventory List. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. SARA 304 Emergency release notification Not regulated. US EPCRA (SARA Title III) Section 313 - Toxic Chemical: Listed substance Not listed. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. CERCLA Hazardous Substances: Reportable quantity Not listed. Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (800-424-8802) and to your Local Emergency Planning Committee. Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) Not regulated.Food and Drug Administration (FDA) Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Section 311/312 Hazard categories NoSARA 302 Extremely hazardous substance US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. New Jersey Worker and Community Right-to-Know Act Not listed. 5 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US US. Massachusetts RTK - Substance List None. US. Pennsylvania Worker and Community Right-to-Know Law Not listed. US. Rhode Island RTK None. US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Volatile organic compounds (VOC) regulations EPA VOC content (40 CFR 51.100(s)) Not determined Not regulatedConsumer products (40 CFR 59, Subpt. C) State Not regulatedConsumer products VOC content (CA) 0 % VOC content (OTC) 0 % International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) YesCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) YesJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory YesPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision 07-27-2015Issue date Allison ChoPrepared by Version # 01 Not available.Further information Health: 1 Flammability: 1 Physical hazard: 0 Personal protection: B HMIS? ratings Health: 1 Flammability: 1 Instability: 0 NFPA ratings NFPA ratings 01 1 6 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC Industries' knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label. For further clarification of any information contained on this (M)SDS consult your supervisor, a health & safety professional, or CRC Industries. Disclaimer 7 / 7 Material name: API/GL-5 Plus New Generation? Heavy Duty Limited Slip Gear Oil 85W140 SL2432, SL2433, SL2435 Version #: 01 Issue date: 07-27-2015 SDS US