SAFETY DATA SHEET 1. Identification Constant Velocity (CV) Joint GreaseProduct identifier Other means of identification SL3174, SL3174BProduct code CV joint greaseRecommended use None known.Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufactured or sold by: Company name CRC Industries, Inc. Address 885 Louis Dr. Warminster, PA 18974 US Telephone General Information 215-674-4300 Technical Assistance 800-521-3168 Customer Service 800-272-4620 24-Hour Emergency 800-424-9300 (US) (CHEMTREC) 703-527-3887 (International) Website www.crcindustries.com 2. Hazard(s) identification Not classified.Physical hazards Category 4Acute toxicity, oralHealth hazards Category 2Hazardous to the aquatic environment, acute hazard Environmental hazards Category 3Hazardous to the aquatic environment, long-term hazard Not classified.OSHA defined hazards Label elements Signal word Warning Hazard statement Harmful if swallowed. Toxic to aquatic life. Harmful to aquatic life with long lasting effects. Precautionary statement Prevention Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Response If swallowed: Call a poison center/doctor if you feel unwell. Rinse mouth. Storage Store away from incompatible materials. Disposal Dispose of contents/container in accordance with local/regional/national regulations. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information 3% of the mixture consists of component(s) of unknown acute oral toxicity. 91% of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment. 3. Composition/information on ingredients Mixtures 1 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US CAS number %Common name and synonymsChemical name 64742-54-7Distillates (petroleum), hydrotreated heavy paraffinic 80 - 90 7720-78-7Iron sulphate 5 - 10 15890-25-2Antimony dithiocarbamate 3 - 5 64742-52-5Distillates (petroleum), hydrotreated heavy naphthenic 3 - 5 1317-33-5Molybdenum disulphide 3 - 5 Specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If breathing stops, provide artificial respiration. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Call a physician if symptoms develop or persist. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. Inhalation Wash off with plenty of water. Remove and isolate contaminated clothing and shoes. Get medical attention if irritation develops and persists. Wash contaminated clothing before reuse. Skin contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Eye contact Rinse mouth. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Never give anything by mouth to a victim who is unconscious or is having convulsions. Do not induce vomiting without advice from poison control center. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms occur. Ingestion Harmful if swallowed.Most important symptoms/effects, acute and delayed Provide general supportive measures and treat symptomatically. In case of inhalation of decomposition products in a fire, symptoms may be delayed. Keep victim under observation. Indication of immediate medical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Use fire-extinguishing media appropriate for surrounding materials.Suitable extinguishing media None known.Unsuitable extinguishing media During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions Cool containers exposed to heat with water spray and remove container, if no risk is involved. No unusual fire or explosion hazards noted.General fire hazards 6. Accidental release measures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures The product is immiscible with water and will spread on the water surface. Prevent product from entering drains. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Avoid dust formation. Clean surface thoroughly to remove residual contamination. Sweep up or vacuum up spillage and collect in suitable container for disposal. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Methods and materials for containment and cleaning up 2 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground. Inform appropriate managerial or supervisory personnel of all environmental releases. Environmental precautions 7. Handling and storage Provide adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. When using, do not eat, drink or smoke. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Avoid release to the environment. Use care in handling/storage. For product usage instructions, please see the product label. Precautions for safe handling Keep containers tightly closed in a dry, cool and well-ventilated place. Do not store in direct sunlight. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection Occupational exposure limits U.S. - OSHA ValueComponents Type TWA 5 mg/m3Distillates (petroleum), hydrotreated heavy paraffinic (CAS 64742-54-7) US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) ValueComponents FormType PEL 0.5 mg/m3Antimony dithiocarbamate (CAS 15890-25-2) PEL 5 mg/m3 Mist.Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) 2000 mg/m3 500 ppm PEL 15 mg/m3 Total dust.Molybdenum disulphide (CAS 1317-33-5) ACGIH ValueComponents FormType TWA 5 mg/m3 Inhalable fractionDistillates (petroleum), hydrotreated heavy paraffinic (CAS 64742-54-7) US. ACGIH Threshold Limit Values ValueComponents FormType TWA 0.5 mg/m3Antimony dithiocarbamate (CAS 15890-25-2) TWA 5 mg/m3 Inhalable fraction.Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) TWA 5 mg/m3 Inhalable fraction.Distillates (petroleum), hydrotreated heavy paraffinic (CAS 64742-54-7) TWA 1 mg/m3Iron sulphate (CAS 7720-78-7) TWA 3 mg/m3 Respirable fraction.Molybdenum disulphide (CAS 1317-33-5) 10 mg/m3 Inhalable fraction. U.S. - NIOSH ValueComponents FormType STEL 10 mg/m3 MistDistillates (petroleum), hydrotreated heavy paraffinic (CAS 64742-54-7) TWA 5 mg/m3 Mist 3 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US US. NIOSH: Pocket Guide to Chemical Hazards ValueComponents FormType TWA 0.5 mg/m3Antimony dithiocarbamate (CAS 15890-25-2) Ceiling 1800 mg/m3Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) STEL 10 mg/m3 Mist. TWA 5 mg/m3 Mist. TWA 1 mg/m3Iron sulphate (CAS 7720-78-7) No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower must be available when handling this product. Appropriate engineering controls Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles).Eye/face protection Skin protection Wear protective gloves such as: Latex. Rubber.Hand protection Wear suitable protective clothing.Other If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels. Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Solid.Physical state Grease.Form Gray.Color Mild petroleum.Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range Not available. Flash point > 450 ?F (> 232.2 ?C) Cleveland Open Cup Evaporation rate Slow. Not available.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Vapor pressure < 0.5 mm Hg @ 68 ?F Vapor density > 5 (air = 1) Relative density 0.9 Solubility (water) Insoluble. 4 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature 500 ?F (260 ?C) estimated Decomposition temperature Not available. Viscosity (kinematic) Not available. Percent volatile Not available. 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions Contact with incompatible materials.Conditions to avoid Acids. Oxidizing agents.Incompatible materials Carbon oxides. Nitrogen oxides (NOx). Sulfur oxides. Metal oxides.Hazardous decomposition products 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Skin contact Prolonged skin contact may cause temporary irritation. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion Harmful if swallowed. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Harmful if swallowed. Test ResultsProduct Species Constant Velocity (CV) Joint Grease Inhalation Acute LC50 Rat 62.36 mg/l, 4 hours Oral * Estimates for product may be based on additional component data not shown. LD50 Rat 594.4 mg/kg Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritation Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. US ACGIH Threshold Limit Values: Listed substance Antimony dithiocarbamate (CAS 15890-25-2) US ACGIH Threshold Limit Values: Listed substance Iron sulphate (CAS 7720-78-7) US ACGIH Threshold Limit Values: Listed substance Molybdenum disulphide (CAS 1317-33-5) US ACGIH Threshold Limit Values: Listed substance This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. 5 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US Aspiration hazard Not an aspiration hazard. Chronic effects Prolonged inhalation may be harmful. 12. Ecological information Toxic to aquatic life. Harmful to aquatic life with long lasting effects.Ecotoxicity Product Test ResultsSpecies Constant Velocity (CV) Joint Grease Aquatic EC50Crustacea 33333.332 mg/l, 48 hours estimatedDaphnia LC50Fish 245.7538 mg/l, 96 hours estimatedFish Components Test ResultsSpecies Antimony dithiocarbamate (CAS 15890-25-2) Aquatic Chronic NOECCrustacea 0.02 mg/l, 21 daysWater flea (Daphnia magna) Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) Aquatic EC50Crustacea 1000 mg/l, 48 hoursWater flea (Daphnia magna) LC50Fish 5000 mg/l, 96 hoursRainbow trout,donaldson trout (Oncorhynchus mykiss) Iron sulphate (CAS 7720-78-7) Aquatic LC50Fish 0.48 mg/l, 96 hoursBrook trout (Salvelinus fontinalis) * Estimates for product may be based on additional component data not shown. Acute EC50Crustacea 7200 ?g/l, 48 hoursWater flea (Daphnia magna) Not readily biodegradable.Persistence and degradability No data available.Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations This product is not a RCRA hazardous waste (See 40 CFR Part 261.20 ? 261.33). Empty containers may be recycled. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. Disposal of waste from residues / unused products Not regulated.Hazardous waste code Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Contaminated packaging 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. 15. Regulatory information This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. 6 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not listed. SARA 304 Emergency release notification Not regulated. US EPCRA (SARA Title III) Section 313 - Toxic Chemical: Listed substance Antimony dithiocarbamate (CAS 15890-25-2) CERCLA Hazardous Substance List (40 CFR 302.4) Antimony dithiocarbamate (CAS 15890-25-2) Listed. Iron sulphate (CAS 7720-78-7) Listed. CERCLA Hazardous Substances: Reportable quantity Iron sulphate (CAS 7720-78-7) 1000 LBS Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (800-424-8802) and to your Local Emergency Planning Committee. Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Antimony dithiocarbamate (CAS 15890-25-2) Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) Not regulated.Food and Drug Administration (FDA) Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Section 311/312 Hazard categories NoSARA 302 Extremely hazardous substance US state regulations US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd. (a)) Antimony dithiocarbamate (CAS 15890-25-2) Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) Distillates (petroleum), hydrotreated heavy paraffinic (CAS 64742-54-7) US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. New Jersey Worker and Community Right-to-Know Act Iron sulphate (CAS 7720-78-7) Antimony dithiocarbamate (CAS 15890-25-2) Distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) US. Massachusetts RTK - Substance List Iron sulphate (CAS 7720-78-7) Molybdenum disulphide (CAS 1317-33-5) US. Pennsylvania Worker and Community Right-to-Know Law Iron sulphate (CAS 7720-78-7) US. Rhode Island RTK Antimony dithiocarbamate (CAS 15890-25-2) Iron sulphate (CAS 7720-78-7) US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Volatile organic compounds (VOC) regulations EPA VOC content (40 CFR 51.100(s)) Not determined Not regulatedConsumer products (40 CFR 59, Subpt. C) 7 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US State Not regulatedConsumer products VOC content (CA) < 0.1 % VOC content (OTC) < 0.1 % International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory YesPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision 05-11-2015Issue date Allison ChoPrepared by Version # 01 Not available.Further information Health: 1 Flammability: 1 Physical hazard: 0 Personal protection: B HMIS? ratings Health: 1 Flammability: 1 Instability: 0 NFPA ratings NFPA ratings 01 1 The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC Industries' knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label. For further clarification of any information contained on this (M)SDS consult your supervisor, a health & safety professional, or CRC Industries. Disclaimer 8 / 8 Material name: Constant Velocity (CV) Joint Grease SL3174, SL3174B Version #: 01 Issue date: 05-11-2015 SDS US