SAFETY DATA SHEET 1. Identification Engine Assembly LubeProduct identifier Other means of identification No. SL3331 (Item# 1007912)Product Code Engine assembly lubricantRecommended use None known.Recommended restrictions Manufacturer/Importer/Supplier/Distributor information Manufactured or sold by: CRC Industries, Inc.Company name 885 Louis Dr.Address Warminster, PA 18974 US Telephone 215-674-4300General Information 800-521-3168Technical Assistance 800-272-4620Customer Service 800-424-9300 (US)24-Hour Emergency 703-527-3887 (International)(CHEMTREC) www.crcindustries.comWebsite 2. Hazard(s) identification Not classified.Physical hazards Not classified.Health hazards Not classified.Environmental hazards Not classified.OSHA defined hazards Label elements None.Hazard symbol Signal word None. Hazard statement The mixture does not meet the criteria for classification. Precautionary statement Prevention Observe good industrial hygiene practices. Response Wash hands after handling. Storage Store away from incompatible materials. Disposal Dispose of contents/container in accordance with local/regional/national regulations. Hazard(s) not otherwise classified (HNOC) None known. 3. Composition/information on ingredients Mixtures CAS number %Chemical name Common name and synonyms 64742-52-5distillates (petroleum), hydrotreated heavy naphthenic 50 - 60 64742-62-7residual oils (petroleum), solvent-dewaxed 40 - 50 7782-42-5graphite < 1 Specific chemical identity and/or percentage of composition has been withheld as a trade secret. 1 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US 4. First-aid measures If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist. Inhalation Remove and isolate contaminated clothing and shoes. Immediately flush skin with plenty of water. Get medical attention if irritation develops and persists. Skin contact Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Remove contact lenses, if present and easy to do. Get medical attention if irritation develops and persists. Eye contact Rinse mouth. Do not induce vomiting without advice from poison control center. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention if symptoms occur. Ingestion Direct contact with eyes may cause temporary irritation. Prolonged or repeated skin contact may cause irritation. Most important symptoms/effects, acute and delayed Treat symptomatically.Indication of immediate medical attention and special treatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Use fire-extinguishing media appropriate for surrounding materials.Suitable extinguishing media None known.Unsuitable extinguishing media During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions Use water spray to keep fire-exposed containers cool and to knock down vapors which may result from product decomposition. No unusual fire or explosion hazards noted.General fire hazards 6. Accidental release measures Keep unnecessary personnel away. Ensure adequate ventilation. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures Sweep up or vacuum up spillage and collect in suitable container for disposal. Following product recovery, flush area with water. For waste disposal, see section 13 of the SDS. Methods and materials for containment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions 7. Handling and storage Avoid contact with eyes, skin, and clothing. Provide adequate ventilation. Keep away from heat and sources of ignition. Wear appropriate personal protective equipment. Avoid release to the environment. Observe good industrial hygiene practices. Use care in handling/storage. For product usage instructions, see the product label. Precautions for safe handling Store in a cool, dry place out of direct sunlight. Store in a well-ventilated place. Keep container tightly closed. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection Occupational exposure limits The following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit. At this time, the other constituents have no known exposure limits. US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) ValueComponents FormType PEL 5 mg/m3 Mist.distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) 2000 mg/m3 2 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) ValueComponents FormType 500 ppm PEL 5 mg/m3 Respirable fraction.graphite (CAS 7782-42-5) 15 mg/m3 Total dust. US. OSHA Table Z-3 (29 CFR 1910.1000) ValueComponents Type TWA 15 mppcfgraphite (CAS 7782-42-5) US. ACGIH Threshold Limit Values ValueComponents FormType TWA 5 mg/m3 Inhalable fraction.distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) TWA 2 mg/m3 Respirable fraction.graphite (CAS 7782-42-5) TWA 5 mg/m3 Inhalable fraction.residual oils (petroleum), solvent-dewaxed (CAS 64742-62-7) US. NIOSH: Pocket Guide to Chemical Hazards ValueComponents FormType Ceiling 1800 mg/m3distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) STEL 10 mg/m3 Mist. TWA 5 mg/m3 Mist. TWA 2.5 mg/m3 Respirable.graphite (CAS 7782-42-5) No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Appropriate engineering controls Individual protection measures, such as personal protective equipment Wear safety glasses with side shields (or goggles).Eye/face protection Skin protection Wear protective gloves such as: Neoprene. Nitrile. Polyethylene. Polyvinyl chloride (PVC).Hand protection Wear suitable protective clothing.Other If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels. Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Solid.Physical state Grease.Form Black.Color Mild petroleum.Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. 3 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US Initial boiling point and boiling range 680 ?F (360 ?C) estimated Flash point 450 ?F (232.2 ?C) Evaporation rate Slow. Not available.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Vapor pressure < 0.1 mm Hg @ 68 ?F Vapor density > 5 (air = 1) Relative density 0.9 Solubility (water) Insoluble. Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature 500 ?F (260 ?C) estimated Decomposition temperature Not available. Viscosity (kinematic) Not available. Percent volatile Not available. 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions Contact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials Carbon oxides. Metal oxides.Hazardous decomposition products 11. Toxicological information Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Skin contact Prolonged skin contact may cause temporary irritation. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion Health injuries are not known or expected under normal use. Symptoms related to the physical, chemical and toxicological characteristics Direct contact with eyes may cause temporary irritation. Information on toxicological effects Acute toxicity Not known. Test ResultsComponents Species distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) Dermal Acute LD50 Rabbit > 2000 mg/kg Oral LD50 Rat > 5000 mg/kg 4 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US Test ResultsComponents Species graphite (CAS 7782-42-5) Oral Acute * Estimates for product may be based on additional component data not shown. LD50 Rat > 10000 mg/kg Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritation Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity Not classifiable as to carcinogenicity to humans. IARC Monographs. Overall Evaluation of Carcinogenicity Not listed. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. US. National Toxicology Program (NTP) Report on Carcinogens Not listed. This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure Not classified. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not an aspiration hazard. Chronic effects Prolonged inhalation may be harmful. Further information This product has no known adverse effect on human health. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Ecotoxicity Components Test ResultsSpecies distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) Aquatic EC50Crustacea 1000 mg/l, 48 hoursWater flea (Daphnia magna) LC50Fish 5000 mg/l, 96 hoursRainbow trout,donaldson trout (Oncorhynchus mykiss) * Estimates for product may be based on additional component data not shown. graphite (CAS 7782-42-5) Aquatic Acute LC50Fish > 1800 mg/l, 96 hoursFish Persistence and degradability No data available.Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 5 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US 13. Disposal considerations This product is not a RCRA hazardous waste (See 40 CFR Part 261.20 ? 261.33). Empty containers may be recycled. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose in accordance with all applicable regulations. Disposal of waste from residues / unused products Not regulated.Hazardous waste code Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. Contaminated packaging 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. 15. Regulatory information This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. US EPCRA (SARA Title III) Section 313 - Toxic Chemical: Listed substance Not listed. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. CERCLA Hazardous Substances: Reportable quantity Not listed. Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to the National Response Center (800-424-8802) and to your Local Emergency Planning Committee. Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) Not regulated.Food and Drug Administration (FDA) Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - No Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Section 311/312 Hazard categories NoSARA 302 Extremely hazardous substance US state regulations US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd. (a)) distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) residual oils (petroleum), solvent-dewaxed (CAS 64742-62-7) 6 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US US. New Jersey Worker and Community Right-to-Know Act graphite (CAS 7782-42-5) US. Massachusetts RTK - Substance List graphite (CAS 7782-42-5) US. Pennsylvania Worker and Community Right-to-Know Law graphite (CAS 7782-42-5) US. Rhode Island RTK distillates (petroleum), hydrotreated heavy naphthenic (CAS 64742-52-5) graphite (CAS 7782-42-5) US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Volatile organic compounds (VOC) regulations EPA VOC content (40 CFR 51.100(s)) 100 % Not regulatedConsumer products (40 CFR 59, Subpt. C) State Not regulatedConsumer products VOC content (CA) < 0.1 % VOC content (OTC) < 0.1 % International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory YesPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision 10-23-2017Issue date Allison YoonPrepared by Version # 01 Not available.Further information Health: 1 Flammability: 1 Physical hazard: 0 Personal protection: B HMIS? ratings Health: 1 Flammability: 1 Instability: 0 NFPA ratings 7 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US NFPA ratings 01 1 The information contained in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. This information is accurate to the best of CRC's knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and directions on the label. For further clarification of any information contained on this (M)SDS consult your supervisor, a health & safety professional, or CRC Industries, Inc.. Disclaimer This document has undergone significant changes and should be reviewed in its entirety.Revision Information 8 / 8 Material name: Engine Assembly Lube No. SL3331 (Item# 1007912) Version #: 01 Issue date: 10-23-2017 SDS US