CYCLO? INDUSTRIES, LLC MATERIAL SAFETY DATA SHEET This MSDS is being provided to your company for the purpose of providing current health and safety information to your management and for your employees who work with this product. Please read the information on these sheets and then provide this information to those people at your company whose responsibility it is to comply with FEDERAL, STATE and COMMUNITY RIGHT TO KNOW regulations. Also, make this information available to any employee who requests it. If Cyclo Industries, LLC considers the formula of this product to be a trade secret, the exact chemical names of the ingredient(s) and the percentages in which they are combined will not appear in the body of this sheet. The exact composition is available upon request to physicians, industrial hygienists and other health professionals. SECTION 1 ? PRODUCT & COMPANY IDENTIFICATION Product Name: Cyclo? Break?Away? Fast Penetrating Oil, Stock Nos. C-10, C-12 & C-16 Product Use: Penetrates and frees rusted or frozen parts, lubricates moving parts and inhibits rust and corrosion. Manufactured by: Cyclo Industries, LLC 10190 Riverside Drive, Palm Beach Gardens, Florida 33410-4881 Telephone: (561) 775-9600 First Aid Emergency: (800) 752-7869 or (312) 906-6194 Shipping Emergency: (800) 424-9300 or (703) 527-3887 (CHEMTREC) HMIS Code: Health = 1 Flammability = 4 Reactivity = 0 SECTION 2 ? COMPOSITION/INFORMATION ON INGREDIENTS CAS Reg. No. Material Percentage Exposure Limits 108-94-1 Cyclohexanone <10 50 ppm = OSHA PEL 68608-26-4 Sodium sulfonate <5 Not determined 8012-95-1 Paraffin oil <90 5 mg/m3 (oil mist, mineral) = OSHA PEL 74-98-6 Propane / isobutene <20 1000 ppm = OSHA PEL SECTION 3 ? HAZARDS IDENTIFICATION Effects of Overexposure: Ingestion: Nausea, sickness. Could be harmful or fatal. Inhalation: May cause breathing difficulties Skin Contact: Prolonged contact may cause irritation Eye Contact: May be irritating Carcinogenicity: NTP Carcinogen = No; IARC Monographs = No; OSHA Regulated = No Cyclo? Break?Away? Fast Penetrating Oil, Stock Nos. C-10, C-12 & C-16 MSDS - Page 2 of 4 SECTION 4 ? FIRST AID MEASURES First Aid Procedures: Ingestion: DO NOT induce vomiting. Contact physician immediately. Skin Contact: Wash with soap and water. Inhalation: Remove to fresh air. Administer oxygen if necessary Eye Contact: Flush with excess water for 15 minutes. Consult physician if irritation persists. SECTION 5 ? FIRE FIGHTING MEASURES Flash Point: <-20?F (<-29?C) Method Used: TCC Flammable Limits in Air by Volume: Lower Explosion Limit (LEL) = 1.1 Upper Explosion Limit (UEL) = 9.4 Extinguishing Media: Foam, carbon dioxide, dry chemical Special Fire Fighting Procedures: Self contained breathing apparatus recommended. CAUTION: Direct water jet will spread burning material. Unusual Fire and Explosion Hazards: Prolonged exposure to temperatures above 130?F may cause cans to burst. SECTION 6 ? ACCIDENTAL RELEASE MEASURES Spill/Leak Procedures: Blot with absorbent material. Dispose of properly. Flush with IPA, rinse with soap and water. SECTION 7 ? HANDLING AND STORAGE Handling & Storage Procedures: Contents under pressure. Do not store above 130?F or near heat, sparks or open flame. See product label for additional information. KEEP OUT OF THE REACH OF CHILDREN. SECTION 8 ? EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory Protection: Above TLV B use NIOSH/MESA approved respirator for organic vapors. Ventilation: Local exhaust is recommended. Protective Clothing: Wear impervious protective gloves and protective clothing to prevent contact with skin and clothing. Eye Protection: Safety glasses are recommended. Work/Hygienic Practices: Eye washes and safety showers in the workplace are recommended. Cyclo? Break?Away? Fast Penetrating Oil, Stock Nos. C-10, C-12 & C-16 MSDS - Page 3 of 4 SECTION 9 ? PHYSICAL AND CHEMICAL PROPERTIES Boiling Point: 266?F (130?C) Specific Gravity (H2O=1): 0.896 Vapor Pressure: Not determined Vapor Density (Air=1): >air Percent Volatile By Volume (%): 96% Percent Solids By Weight (%): 4% Solubility in Water: Slightly pH: Not applicable Evaporation Rate (Butyl Acetate = 1): >1 Appearance and Odor: Amber brown liquid, light viscosity, pungent odor. Volatile Organic Compound (VOC) (as packaged minus water): 25% by weight SECTION 10 ? STABILITY AND REACTIVITY Stability: Stable Conditions to Avoid: None Incompatibility (materials to avoid): Strong oxidizers, acids and bases. Hazardous Decomposition or Byproducts: Oxides of carbon and sulfur upon incomplete combustion. Hazardous Polymerization: Will not occur. SECTION 11 ? TOXICOLOGICAL INFORMATION Toxicological Data: Chemical Name LD50 mg/kg Cyclohexanone 1900.0 SECTION 12 ? ECOLOGICAL INFORMATION Aquatic/Terrestrial Toxicity Environmental Fate No data is available at this time. SECTION 13 ? DISPOSAL CONSIDERATIONS Waste Disposal Method: Dispose of in accordance with local, state and federal regulations. Before attempting clean up, refer to other sections of this MSDS for hazard caution information. Cyclo? Break?Away? Fast Penetrating Oil, Stock Nos. C-10, C-12 & C-16 MSDS - Page 4 of 4 SECTION 14 ? TRANSPORT INFORMATION U.S. DOT Shipping Description: Aerosol, Consumer Commodity ID Number: Not regulated Hazard Class: ORM-D Packing Group: Not applicable Label: Not applicable Placards: Not applicable IMDG Shipping Description: Aerosol, Limited Quantity ID Number: UN1950 Hazard Class: 2 Packing Group: Not applicable Label: Not applicable Markings: Not applicable Placards: Not applicable SECTION 15 ? REGULATORY INFORMATION TSCA Inventory: All components of this product are listed on the Toxic Substance Control Act (TSCA) Inventory of chemical substances maintained by the U.S. Environmental Protection Agency. SARA Extremely Hazardous Substances None SARA Section 313 This product does not contain any toxic chemical(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372 (SARA 313 ? Toxic Chemical Release Reporting) CERCLA/Superfund (RQ): This product is not subject to CERC LA reporting requirements. Many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations. California Proposition 65: This product does not contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. SECTION 16 ? OTHER INFORMATION Document Date: January 31, 2005 Supersedes: 3/16/01 Revisions: Section 2 ? revised CAS # for Sodium Sulfonate; added Sections 11, 12 & 15. Cyclo Industries, LLC provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. Individuals receiving this information must exercise their independent judgement in determining its appropriateness for a particular purpose. Cyclo Industries, LLC makes no representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose with respect to the information set forth herein or to the product to which the information refers. Accordingly, Cyclo Industries, LLC will not be responsible for damages resulting from use of or reliance upon this information.