SDS Repository

sds

Collection
Shell
Description
Shell Rotella T6 Multi Vehicle 5W-30
Tags
Search Tag
Filename
RotT6MultiV5W30CK4_3_1ugl_A0II.PDF
Source
 
Full Text
SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 1 / 16 SECTION 1. IDENTIFICATION Product name : Shell Rotella T6 Multi Vehicle 5W-30 Product code : 001F8876 Manufacturer or supplier's details Manufacturer/Supplier : Shell Oil Products US PO Box 4427 Houston TX 77210-4427 USA SDS Request : (+1) 877-276-7285 Customer Service : Emergency telephone number Spill Information : 877-504-9351 Health Information : 877-242-7400 Recommended use of the chemical and restrictions on use Recommended use : Engine oil. SECTION 2. HAZARDS IDENTIFICATION GHS classification in accordance with 29 CFR 1910.1200 Long-term (chronic) aquatic hazard : Category 3 GHS label elements Hazard pictograms : No symbol Signal word : No signal word Hazard statements : PHYSICAL HAZARDS: Not classified as a physical hazard under GHS criteria. HEALTH HAZARDS: Not classified as a health hazard under GHS criteria. ENVIRONMENTAL HAZARDS: H412 Harmful to aquatic life with long lasting effects. Precautionary statements : Prevention: P273 Avoid release to the environment. Response: No precautionary phrases. Storage: No precautionary phrases. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 2 / 16 Disposal: P501 Dispose of contents/ container to an approved waste dis- posal plant. Other hazards which do not result in classification Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin result- ing in disorders such as oil acne/folliculitis. Used oil may contain harmful impurities. Not classified as flammable but will burn. The classification of this material is based on OSHA HCS 2012 criteria. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical nature : Synthetic base oil and additives. Highly refined mineral oil. The highly refined mineral oil contains <3% (w/w) DMSO- extract, according to IP346. The highly refined mineral oil is only present as additive dilu- ent. * contains one or more of the following CAS-numbers: 64742- 53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0, 68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69- 9, 68649-12-7, 151006-60-9, 163149-28-8. Hazardous components Chemical name Synonyms CAS-No. Concentration (% w/w) Interchangeable low viscosity base oil (<20,5 cSt @40?C) * Not Assigned 0 - 90 Alkaryl amine bis(nonylphenyl )amine 36878-20-3 1 - 3 Calcium sulphonate Benzenesul- fonic acid, mono-C16-24- alkyl derivs., calcium salts 70024-69-0 0.1 - 0.99 Alkyl borate Not Assigned 0.1 - 0.99 Dialkyl alkaryl ami- nomethyl dicarbox- ylate Not Assigned 0.1 - 0.99 Alcohol, ethoxylated Alcohols, C12- 16, ethoxylated 68551-12-2 0.1 - 0.99 No hazardous ingredients SECTION 4. FIRST-AID MEASURES If inhaled : No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 3 / 16 In case of skin contact : Remove contaminated clothing. Flush exposed area with wa- ter and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention. In case of eye contact : Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention. If swallowed : In general no treatment is necessary unless large quantities are swallowed, however, get medical advice. Most important symptoms and effects, both acute and delayed : Oil acne/folliculitis signs and symptoms may include formation of black pustules and spots on the skin of exposed areas. Ingestion may result in nausea, vomiting and/or diarrhoea. Protection of first-aiders : When administering first aid, ensure that you are wearing the appropriate personal protective equipment according to the incident, injury and surroundings. Indication of any immediate medical attention and special treatment needed : Treat symptomatically. SECTION 5. FIRE-FIGHTING MEASURES Suitable extinguishing media : Foam, water spray or fog. Dry chemical powder, carbon diox- ide, sand or earth may be used for small fires only. Unsuitable extinguishing media : Do not use water in a jet. Specific hazards during fire- fighting : Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds. Specific extinguishing meth- ods : Use extinguishing measures that are appropriate to local cir- cumstances and the surrounding environment. Special protective equipment for firefighters : Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469). SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protec- : Avoid contact with skin and eyes. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 4 / 16 tive equipment and emer- gency procedures Environmental precautions : Local authorities should be advised if significant spillages cannot be contained. Methods and materials for containment and cleaning up : Slippery when spilt. Avoid accidents, clean up immediately. Prevent from spreading by making a barrier with sand, earth or other containment material. Reclaim liquid directly or in an absorbent. Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of properly. Additional advice : For guidance on selection of personal protective equipment see Chapter 8 of this Safety Data Sheet. For guidance on disposal of spilled material see Chapter 13 of this Safety Data Sheet. SECTION 7. HANDLING AND STORAGE Technical measures : Use local exhaust ventilation if there is risk of inhalation of vapours, mists or aerosols. Use the information in this data sheet as input to a risk as- sessment of local circumstances to help determine appropri- ate controls for safe handling, storage and disposal of this material. Advice on safe handling : Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning mate- rials in order to prevent fires. Avoidance of contact : Strong oxidising agents. Product Transfer : Proper grounding and bonding procedures should be used during all bulk transfer operations to avoid static accumulation. Further information on stor- age stability : Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers. Store at ambient temperature. Packaging material : Suitable material: For containers or container linings, use mild steel or high density polyethylene. Unsuitable material: PVC. Container Advice : Polyethylene containers should not be exposed to high tem- peratures because of possible risk of distortion. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 5 / 16 SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value type (Form of exposure) Control parame- ters / Permissible concentration Basis Oil mist, mineral Not Assigned TWA (Mist) 5 mg/m3 OSHA Z-1 Oil mist, mineral TWA (Inhal- able fraction) 5 mg/m3 ACGIH Biological occupational exposure limits No biological limit allocated. Monitoring Methods Monitoring of the concentration of substances in the breathing zone of workers or in the general workplace may be required to confirm compliance with an OEL and adequacy of exposure con- trols. For some substances biological monitoring may also be appropriate. Validated exposure measurement methods should be applied by a competent person and sam- ples analysed by an accredited laboratory. Examples of sources of recommended exposure measurement methods are given below or con- tact the supplier. Further national methods may be available. National Institute of Occupational Safety and Health (NIOSH), USA: Manual of Analytical Meth- ods http://www.cdc.gov/niosh/ Occupational Safety and Health Administration (OSHA), USA: Sampling and Analytical Methods http://www.osha.gov/ Health and Safety Executive (HSE), UK: Methods for the Determination of Hazardous Substanc- es http://www.hse.gov.uk/ Institut f?r Arbeitsschutz Deutschen Gesetzlichen Unfallversicherung (IFA) , Germany http://www.dguv.de/inhalt/index.jsp L'Institut National de Recherche et de Securit?, (INRS), France http://www.inrs.fr/accueil Engineering measures : The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Select controls based on a risk assessment of local circumstances. Appropriate measures include: Adequate ventilation to control airborne concentrations. Where material is heated, sprayed or mist formed, there is greater potential for airborne concentrations to be generated. General Information: Define procedures for safe handling and maintenance of controls. Educate and train workers in the hazards and control measures relevant to normal activities associated with this product. Ensure appropriate selection, testing and maintenance of equipment used to control exposure, e.g. personal protective equipment, local exhaust ventilation. Drain down system prior to equipment break-in or mainte- nance. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 6 / 16 Retain drain downs in sealed storage pending disposal or subsequent recycle. Always observe good personal hygiene measures, such as washing hands after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard con- taminated clothing and footwear that cannot be cleaned. Practice good housekeeping. Personal protective equipment Respiratory protection : No respiratory protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precau- tions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentra- tions to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the spe- cific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers. Where air-filtering respirators are suitable, select an appro- priate combination of mask and filter. Select a filter suitable for the combination of organic gases and vapours and particles [Type A/Type P boiling point >65?C (149?F)]. Hand protection Remarks : Where hand contact with the product may occur the use of gloves approved to relevant standards (e.g. Europe: EN374, US: F739) made from the following materials may provide suitable chemical protection. PVC, neoprene or nitrile rubber gloves Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical re- sistance of glove material, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced. Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands should be washed and dried thoroughly. Appli- cation of a non-perfumed moisturizer is recommended. For continuous contact we recommend gloves with break- through time of more than 240 minutes with preference for > 480 minutes where suitable gloves can be identified. For short-term/splash protection we recommend the same but recognize that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time maybe acceptable so long as appropriate maintenance and replacement regimes are followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. Glove thickness should be typically greater than 0.35 mm depending on the glove make and model. Eye protection : If material is handled such that it could be splashed into eyes, protective eyewear is recommended. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 7 / 16 Skin and body protection : Skin protection is not ordinarily required beyond standard work clothes. It is good practice to wear chemical resistant gloves. Protective measures : Personal protective equipment (PPE) should meet recom- mended national standards. Check with PPE suppliers. Thermal hazards : Not applicable Environmental exposure controls General advice : Take appropriate measures to fulfill the requirements of rele- vant environmental protection legislation. Avoid contamination of the environment by following advice given in Section 6. If necessary, prevent undissolved material from being dis- charged to waste water. Waste water should be treated in a municipal or industrial waste water treatment plant before discharge to surface water. Local guidelines on emission limits for volatile substances must be observed for the discharge of exhaust air containing vapour. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : liquid Colour : Clear amber Odour : Slight hydrocarbon Odour Threshold : Data not available pH : Not applicable pour point : -48 ?C / -54 ?F Method: ASTM D97 Initial boiling point and boiling range : > 280 ?C / 536 ?F estimated value(s) Flash point : 239 ?C / 462 ?F Method: ASTM D92 (COC) Evaporation rate : Data not available Flammability (solid, gas) : Data not available Upper explosion limit / upper flammability limit : Typical 10 %(V) Lower explosion limit / Lower flammability limit : Typical 1 %(V) SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 8 / 16 Vapour pressure : < 0.5 Pa (20 ?C / 68 ?F) estimated value(s) Relative vapour density : > 1 estimated value(s) Relative density : 0.845 (15 ?C / 59 ?F) Density : 845 kg/m3 (15.0 ?C / 59.0 ?F) Method: ASTM D4052 Solubility(ies) Water solubility : negligible Solubility in other solvents : Data not available Partition coefficient: n- octanol/water : log Pow: > 6 (based on information on similar products) Auto-ignition temperature : > 320 ?C / 608 ?F Decomposition temperature : Data not available Viscosity Viscosity, dynamic : Data not available Viscosity, kinematic : 75 mm2/s (40.0 ?C / 104.0 ?F) Method: ASTM D445 12.1 mm2/s (100 ?C / 212 ?F) Method: ASTM D445 Explosive properties : Not classified Oxidizing properties : Data not available Conductivity : This material is not expected to be a static accumulator. SECTION 10. STABILITY AND REACTIVITY Reactivity : The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph. Chemical stability : Stable. Possibility of hazardous reac- tions : Reacts with strong oxidising agents. Conditions to avoid : Extremes of temperature and direct sunlight. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 9 / 16 Incompatible materials : Strong oxidising agents. Hazardous decomposition products : No decomposition if stored and applied as directed. SECTION 11. TOXICOLOGICAL INFORMATION Basis for assessment : Information given is based on data on the components and the toxicology of similar products.Unless indicated otherwise, the data presented is representative of the product as a whole, rather than for individual component(s). Information on likely routes of exposure Skin and eye contact are the primary routes of exposure although exposure may occur following accidental ingestion. Acute toxicity Product: Acute oral toxicity : LD50 (rat): > 5,000 mg/kg Remarks: Low toxicity: Based on available data, the classification criteria are not met. Acute inhalation toxicity : Remarks: Based on available data, the classification criteria are not met. Acute dermal toxicity : LD50 (Rabbit): > 5,000 mg/kg Remarks: Low toxicity: Based on available data, the classification criteria are not met. Skin corrosion/irritation Product: Remarks: Slightly irritating to skin., Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis., Based on availa- ble data, the classification criteria are not met. Serious eye damage/eye irritation Product: Remarks: Slightly irritating to the eye., Based on available data, the classification criteria are not met. Respiratory or skin sensitisation Product: Remarks: Not a skin sensitiser. Based on available data, the classification criteria are not met. Components: Calcium sulphonate: SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 10 / 16 Remarks: May cause an allergic skin reaction in sensitive individuals. Remarks: Classified Skin Sensitiser Category 1B. Alkyl borate: Remarks: May cause an allergic skin reaction in sensitive individuals. Remarks: Classified Skin Sensitiser Category 1B. Dialkyl alkaryl aminomethyl dicarboxylate: Remarks: May cause an allergic skin reaction in sensitive individuals. Remarks: Classified Skin Sensitiser Category 1B. Germ cell mutagenicity Product: : Remarks: Non mutagenic, Based on available data, the classi- fication criteria are not met. Carcinogenicity Product: Remarks: Not a carcinogen., Based on available data, the classification criteria are not met. IARC No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. ACGIH No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcino- gen by ACGIH. OSHA No component of this product present at levels greater than or equal to 0.1% is on OSHA?s list of regulated carcinogens. NTP No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. Reproductive toxicity Product: : Remarks: Not a developmental toxicant., Does not impair fertility., Based on available data, the classification criteria are not met. SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 11 / 16 STOT - single exposure Product: Remarks: Based on available data, the classification criteria are not met. STOT - repeated exposure Product: Remarks: Based on available data, the classification criteria are not met. Aspiration toxicity Product: Not an aspiration hazard. Further information Product: Remarks: Used oils may contain harmful impurities that have accumulated during use. The con- centration of such impurities will depend on use and they may present risks to health and the environment on disposal., ALL used oil should be handled with caution and skin contact avoided as far as possible. Remarks: Continuous contact with used engine oils has caused skin cancer in animal tests. Remarks: Slightly irritating to respiratory system. SECTION 12. ECOLOGICAL INFORMATION Basis for assessment : Ecotoxicological data have not been determined specifically for this product. Information given is based on a knowledge of the components and the ecotoxicology of similar products. Unless indicated otherwise, the data presented is representa- tive of the product as a whole, rather than for individual com- ponent(s).(LL/EL/IL50 expressed as the nominal amount of product required to prepare aqueous test extract). Ecotoxicity Product: Toxicity to fish (Acute toxici- ty) : Remarks: LL/EL/IL50 10-100 mg/l Harmful Toxicity to daphnia and other aquatic invertebrates (Acute toxicity) : Remarks: LL/EL/IL50 10-100 mg/l Harmful Toxicity to algae (Acute tox- icity) : Remarks: LL/EL/IL50 10-100 mg/l Harmful SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 12 / 16 Toxicity to fish (Chronic tox- icity) : Remarks: Data not available Toxicity to daphnia and other aquatic invertebrates (Chron- ic toxicity) : Remarks: Data not available Toxicity to microorganisms (Acute toxicity) : Remarks: Data not available Persistence and degradability Product: Biodegradability : Remarks: Not readily biodegradable. Major constituents are inherently biodegradable, but contains components that may persist in the environment. Bioaccumulative potential Product: Bioaccumulation : Remarks: Contains components with the potential to bioac- cumulate. Mobility in soil Product: Mobility : Remarks: Liquid under most environmental conditions. If it enters soil, it will adsorb to soil particles and will not be mobile. Remarks: Floats on water. Other adverse effects Product: Additional ecological infor- mation : Does not have ozone depletion potential, photochemical ozone creation potential or global warming potential. Product is a mixture of non-volatile components, which will not be released to air in any significant quantities under normal conditions of use. Poorly soluble mixture. Causes physical fouling of aquatic organisms. SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues : Recover or recycle if possible. It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 13 / 16 determine the proper waste classification and disposal meth- ods in compliance with applicable regulations. Do not dispose into the environment, in drains or in water courses Waste product should not be allowed to contaminate soil or ground water, or be disposed of into the environment. Waste, spills or used product is dangerous waste. Contaminated packaging : Dispose in accordance with prevailing regulations, preferably to a recognized collector or contractor. The competence of the collector or contractor should be established beforehand. Disposal should be in accordance with applicable regional, national, and local laws and regulations. Local legislation Remarks : Disposal should be in accordance with applicable regional, national, and local laws and regulations. SECTION 14. TRANSPORT INFORMATION National Regulations US Department of Transportation Classification (49 CFR Parts 171-180) Not regulated as a dangerous good International Regulations IATA-DGR Not regulated as a dangerous good IMDG-Code Not regulated as a dangerous good Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable for product as supplied. MARPOL Annex 1 rules apply for bulk shipments by sea. Special precautions for user Remarks : Special Precautions: Refer to Section 7, Handling & Storage, for special precautions which a user needs to be aware of or needs to comply with in connection with transport. SECTION 15. REGULATORY INFORMATION EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity Components CAS-No. Component RQ (lbs) Calculated product RQ (lbs) benzene 71-43-2 10 * SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 14 / 16 2-methylpropan-1-ol 78-83-1 5000 * *: Calculated RQ exceeds reasonably attainable upper limit. Calculated RQ exceeds reasonably attainable upper limit., Shell classifies this material as an "oil" under the CERCLA Petroleum Exclusion, therefore releases to the environment are not reporta- ble under CERCLA., The components with RQs are given for information. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 302 Extremely Hazardous Substances Threshold Planning Quantity Components CAS-No. Component TPQ (lbs) SARA 302 Extremely Hazardous Substances Threshold Planning Quantity No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 311/312 Hazards : No SARA Hazards SARA 313 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. Clean Water Act The following Hazardous Chemicals are listed under the U.S. CleanWater Act, Section 311, Table 117.3: benzene 71-43-2 0.0002 % US State Regulations Pennsylvania Right To Know Diphenylamine 122-39-4 California Prop. 65 WARNING! This product contains a chemical known to the State of California to cause cancer. Other regulations: The regulatory information is not intended to be comprehensive. Other regulations may apply to this material. The components of this product are reported in the following inventories: EINECS : All components listed. TSCA : All components listed. DSL : Not established. SECTION 16. OTHER INFORMATION Further information SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 15 / 16 NFPA Rating (Health, Fire, Reac- tivity) 0, 1, 0 Full text of other abbreviations ACGIH : USA. ACGIH Threshold Limit Values (TLV) OSHA Z-1 : USA. Occupational Exposure Limits (OSHA) - Table Z-1 Lim- its for Air Contaminants ACGIH / TWA : 8-hour, time-weighted average OSHA Z-1 / TWA : 8-hour time weighted average Abbreviations and Acronyms : The standard abbreviations and acronyms used in this docu- ment can be looked up in reference literature (e.g. scientific dictionaries) and/or websites. ACGIH = American Conference of Governmental Industrial Hygienists ADR = European Agreement concerning the International Carriage of Dangerous Goods by Road AICS = Australian Inventory of Chemical Substances ASTM = American Society for Testing and Materials BEL = Biological exposure limits BTEX = Benzene, Toluene, Ethylbenzene, Xylenes CAS = Chemical Abstracts Service CEFIC = European Chemical Industry Council CLP = Classification Packaging and Labelling COC = Cleveland Open-Cup DIN = Deutsches Institut fur Normung DMEL = Derived Minimal Effect Level DNEL = Derived No Effect Level DSL = Canada Domestic Substance List EC = European Commission EC50 = Effective Concentration fifty ECETOC = European Center on Ecotoxicology and Toxicolo- gy Of Chemicals ECHA = European Chemicals Agency EINECS = The European Inventory of Existing Commercial Chemical Substances EL50 = Effective Loading fifty ENCS = Japanese Existing and New Chemical Substances Inventory EWC = European Waste Code GHS = Globally Harmonised System of Classification and Labelling of Chemicals IARC = International Agency for Research on Cancer IATA = International Air Transport Association IC50 = Inhibitory Concentration fifty IL50 = Inhibitory Level fifty IMDG = International Maritime Dangerous Goods INV = Chinese Chemicals Inventory IP346 = Institute of Petroleum test method N? 346 for the determination of polycyclic aromatics DMSO-extractables KECI = Korea Existing Chemicals Inventory LC50 = Lethal Concentration fifty LD50 = Lethal Dose fifty per cent. LL/EL/IL = Lethal Loading/Effective Loading/Inhibitory loading SAFETY DATA SHEET According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Shell Rotella T6 Multi Vehicle 5W-30 Version 1.3 Revision Date: 10/09/2019 SDS Number: 800010027905 Print Date: 01/20/2022 Date of last issue: 09/12/2019 16 / 16 LL50 = Lethal Loading fifty MARPOL = International Convention for the Prevention of Pollution From Ships NOEC/NOEL = No Observed Effect Concentration / No Ob- served Effect Level OE_HPV = Occupational Exposure - High Production Volume PBT = Persistent, Bioaccumulative and Toxic PICCS = Philippine Inventory of Chemicals and Chemical Substances PNEC = Predicted No Effect Concentration REACH = Registration Evaluation And Authorisation Of Chemicals RID = Regulations Relating to International Carriage of Dan- gerous Goods by Rail SKIN_DES = Skin Designation STEL = Short term exposure limit TRA = Targeted Risk Assessment TSCA = US Toxic Substances Control Act TWA = Time-Weighted Average vPvB = very Persistent and very Bioaccumulative A vertical bar (|) in the left margin indicates an amendment from the previous version. Sources of key data used to compile the Safety Data Sheet : The quoted data are from, but not limited to, one or more sources of information (e.g. toxicological data from Shell Health Services, material suppliers? data, CONCAWE, EU IUCLID date base, EC 1272 regulation, etc). Revision Date : 10/09/2019 The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor- mation and belief at the date of its publication. The information given is designed only as a guid- ance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. US / EN