SECTION 1: IDENTIFICATION SECTION 2: HAZARD(S) IDENTIFICATION 2.1 Classification of the substance or mixture: 29 CFR 1910.1200: Classification of this product has been carried out in accordance with paragraph (d) of ? 1910.1200. Skin Sens. 1A: Sensitisation, skin, Category 1A, H317 2.2 Label elements: 29 CFR 1910.1200: Warning Hazard statements: Skin Sens. 1A: H317 - May cause an allergic skin reaction. Precautionary statements: P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P261: Avoid breathing dust/fume/gas/mist/vapours/spray. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear protective gloves/protective clothing/respiratory protection/eye protection/protective footwear. P302+P352: IF ON SKIN: Wash with plenty of soap and water. P333+P313: If skin irritation or rash occurs: Get medical advice/attention. P501: Dispose of the contents/containers according to the local, state and federal regulations. Substances that contribute to the classification maleic anhydride 2.3 Hazards not otherwise classified (HNOC): Non-applicable SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1 Substances: Non-applicable 3.2 Mixtures: Chemical description: Mixture based on hydrocarbons and additives Components: - CONTINUED ON NEXT PAGE - Page 1/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease 1.1 GHS Product identifier: Other means of identification: B?laster Pro Grade Multi-Purpose Grease GR-14C-MP 1.2 Recommended use of the chemical and restrictions on use: Relevant uses: Lubricant (grease) Uses advised against: All uses not specified in this section or in section 7.3 1.3 Relevant identified uses of the substance or mixture and uses advised against Product Use: Lubrication Uses advised against: No information available 1.3 Details of supplier of safety data sheet Manufacturers/Supplier: Telephone and Fax Number: Emergency Telephone Number: Website: The Blaster Corporation 8500 Sweet Valley Drive 44125 Valley View, Ohio - USA T (216) 901-5800 - F (216) 901-5801 ChemTel 800-255-3924 www.blastercorp.co m Date of compilation: 03/09/2023 SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS (continued) Remaining components are non-hazardous and/or present at amounts below reportable limits. The specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret in accordance with paragraph (i) of ?1910.1200.Therefore, in accordance with Appendix D to ? 1910.1200, the product contains: Identification Chemical name/Classification Concentration CAS: 64742-52-5 Distillates (petroleum), hydrotreated heavy naphthenic , < 3 % IP 346(<20.5 cSt @ 40?C) Asp. Tox. 1: H304 - Danger 65 - <85 % CAS: 68649-42-3 Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts Eye Irrit. 2A: H319; Skin Irrit. 2: H315 - Warning 1 - <5 % CAS: 108-31-6 maleic anhydride Acute Tox. 4: H302; Eye Dam. 1: H318; Resp. Sens. 1: H334; Skin Corr. 1B: H314; Skin Sens. 1A: H317; STOT RE 1: H372 - Danger <1 % To obtain more information on the hazards of the substances consult sections 11, 12 and 16. SECTION 4: FIRST-AID MEASURES 4.1 Description of necessary measures: The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt, seek medical attention for direct exposure to the chemical product or persistent discomfort, showing the SDS of this product. By inhalation: This product is not classified as hazardous through inhalation,however, it is recommended in case of intoxication symptoms to remove the person affected from the area of exposure, provide clean air and keep at rest. Request medical attention if symptoms persist. By skin contact: May cause an allergic skin reaction. In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case of changes on the skin (stinging, redness, rashes, blisters,?), seek medical advice with this Safety Data Sheet By eye contact: Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, as this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product. By ingestion/aspiration: Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion. 4.2 Most important symptoms/effects, acute and delayed: Acute and delayed effects are indicated in sections 2 and 11. 4.3 Indication of immediate medical attention and special treatment needed, if necessary: Non-applicable SECTION 5: FIRE-FIGHTING MEASURES 5.1 Suitable (and unsuitable) extinguishing media: Suitable extinguishing media: Product is non-flammable under normal conditions of storage, handling and use. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems. Unsuitable extinguishing media: Non-applicable 5.2 Specific hazards arising from the chemical: As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk. 5.3 Special protective equipment and precautions for fire-fighters: Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment. Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...) - CONTINUED ON NEXT PAGE - Page 2/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 5: FIRE-FIGHTING MEASURES (continued) Additional provisions: As in any fire, prevent human exposure to fire, smoke, fumes or products of combustion. Only properly trained personnel should be involved in firefighting. Evacuate nonessential personnel from the fire area. Destroy any source of ignition. In case of fire, refrigerate the storage containers and tanks for products susceptible to inflammation. Avoid spillage of the products used to extinguish the fire into an aqueous medium. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures: For non-emergency personnel: Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal For emergency responders: Wear protective equipment. Keep unprotected persons away. See section 8. 6.2 Environmental precautions: This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water. 6.3 Methods and materials for containment and cleaning up: It is recommended: Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal 6.4 Reference to other sections: See sections 8 and 13. SECTION 7: HANDLING AND STORAGE 7.1 Precautions for safe handling: A.- General precautions for safe use Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6). B.- Technical recommendations for the prevention of fires and explosions Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use. C.- Technical recommendations on general occupational hygiene Do not eat or drink during the process, washing hands afterwards with suitable cleaning products. D.- Technical recommendations to prevent environmental risks It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3) 7.2 Conditions for safe storage, including any incompatibilities: A.- Technical measures for storage Store in a cool, dry, well-ventilated location B.- General conditions for storage Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5 7.3 Specific end use(s): Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this product. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 Control parameters: Substances whose occupational exposure limits have to be monitored in the workplace: - CONTINUED ON NEXT PAGE - Page 3/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000): Identification Occupational exposure limits maleic anhydride 8-hour TWA PEL 0.25 ppm 1 mg/m? CAS: 108-31-6 Ceiling Values - TWA PEL US. ACGIH Threshold Limit Values (2022): Identification Occupational exposure limits maleic anhydride TLV-TWA 0.1 ppm CAS: 108-31-6 TLV-STEL CALIFORNIA- TABLE AC-1 PERMISSIBLE EXPOSURE LIMITS FOR CHEMICAL CONTAMINANTS: Identification Occupational exposure limits maleic anhydride PEL 0.1 ppm 0.4 mg/m? CAS: 108-31-6 STEL Nuisance dust: Inhalable dust 10 mg/m3 // Respirable dust 4 mg/m3 8.2 Appropriate engineering controls: A.- Individual protection measures, such as personal protective equipment As a preventative measure it is recommended to use basic Personal Protection Equipment. For more information on Personal Protection Equipment (storage, use, cleaning, maintenance, class of protection,?) consult the information leaflet provided by the manufacturer. For more information see subsection 7.1. All information contained herein is a recommendation, the information on clothing performance must be combined with professional judgment, and a clear understanding of the clothing application, to provide the best protection to the worker. All chemical protective clothing use must be based on a hazard assessment to determine the risks for exposure to chemicals and other hazards. Conduct hazard assessments in accordance with 29 CFR 1910.132. B.- Respiratory protection Pictogram PPE Remarks Mandatory respiratory tract protection Filter mask for gases and vapours Replace when there is a taste or smell of the contaminant inside the face mask. If the contaminant comes with warnings it is recommended to use isolation equipment. Use respirator in accordance with manufacturer?s use limitations and OSHA standard 1910.134 (29CFR) C.- Specific protection for the hands Pictogram PPE Remarks Mandatory hand protection Chemical protective gloves (Material: Butyl, Breakthrough time: > 480 min, Thickness: 0.7 mm) The Breakthrough Time indicated by the manufacturer must exceed the period during which the product is being used. Do not use protective creams after the product has come into contact with skin. Use gloves in accordance with manufacturer?s use limitations and OSHA standard 1910.138 (29CFR) As the product is a mixture of several substances, the resistance of the glove material can not be calculated in advance with total reliability and has therefore to be checked prior to the application. D.- Eye and face protection Pictogram PPE Remarks Mandatory face protection Panoramic glasses against splash/projections. Clean daily and disinfect periodically according to the manufacturer?s instructions. Use if there is a risk of splashing. Use this PPE in accordance with manufacturer?s use limitations and OSHA standard 1910.133 (29CFR) E.- Bodily protection Pictogram PPE Remarks Work clothing Replace before any evidence of deterioration. - CONTINUED ON NEXT PAGE - Page 4/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued) Pictogram PPE Remarks Anti-slip work shoes Replace before any evidence of deterioration. F.- Additional emergency measures Emergency measure Standards Emergency measure Standards Emergency shower ANSI Z358-1 ISO 3864-1:2011, ISO 3864-4:2011 Eyewash stations DIN 12 899 ISO 3864-1:2011, ISO 3864-4:2011 Environmental exposure controls: In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see subsection 7.1.D 40 CFR Part 59 (VOC): V.O.C.(weight-percent): 0 % weight V.O.C. at 68 ?F: 0 kg/m? (0 g/L) California Air Resources Board (CARB) - VOC Regulatory: V.O.C.(weight-percent): 0 % weight V.O.C. at 68 ?F: 0 kg/m? (0 g/L) SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties: For complete information see the product datasheet. Appearance: Physical state at 68 ?F: Solid Appearance: Not available Color: Amber Odor: Not available Odour threshold: Non-applicable * Volatility: Boiling point at atmospheric pressure: Non-applicable * Vapour pressure at 68 ?F: Non-applicable * Vapour pressure at 122 ?F: Non-applicable * Evaporation rate at 68 ?F: Non-applicable * Product description: Density at 68 ?F: Non-applicable * Relative density at 68 ?F: Non-applicable * Dynamic viscosity at 68 ?F: Non-applicable * Kinematic viscosity at 68 ?F: Non-applicable * Kinematic viscosity at 104 ?F: Non-applicable * Concentration: Non-applicable * pH: Non-applicable * Vapour density at 68 ?F: Non-applicable * Partition coefficient n-octanol/water 68 ?F: Non-applicable * *Not relevant due to the nature of the product, not providing information property of its hazards. - CONTINUED ON NEXT PAGE - Page 5/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued) Solubility in water at 68 ?F: Non-applicable * Solubility properties: Non-applicable * Decomposition temperature: Non-applicable * Melting point/freezing point: Non-applicable * Flammability: Flash Point: Non-applicable Flammability (solid, gas): Non-applicable * Autoignition temperature: Non-applicable * Lower flammability limit: Non-applicable * Upper flammability limit: Non-applicable * Explosive (Solid): Lower explosive limit: Non-applicable * Upper explosive limit: Non-applicable * Particle characteristics: Median equivalent diameter: Non-applicable * 9.2 Other information: Information with regard to physical hazard classes: Explosive properties: Non-applicable * Oxidising properties: Non-applicable * Corrosive to metals: Non-applicable * Heat of combustion: Non-applicable * Aerosols-total percentage (by mass) of flammable components: Non-applicable * Other safety characteristics: Surface tension at 68 ?F: Non-applicable * Refraction index: Non-applicable * *Not relevant due to the nature of the product, not providing information property of its hazards. SECTION 10: STABILITY AND REACTIVITY 10.1 Reactivity: No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7. 10.2 Chemical stability: Chemically stable under the indicated conditions of storage, handling and use. 10.3 Possibility of hazardous reactions: Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected. 10.4 Conditions to avoid: Applicable for handling and storage at room temperature: Shock and friction Contact with air Increase in temperature Sunlight Humidity Not applicable Not applicable Not applicable Not applicable Not applicable 10.5 Incompatible materials: Acids Water Oxidising materials Combustible materials Others Avoid strong acids Not applicable Precaution Not applicable Avoid alkalis or strong bases 10.6 Hazardous decomposition products: See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO?), carbon monoxide and other organic compounds. - CONTINUED ON NEXT PAGE - Page 6/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 11: TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects: The experimental information related to the toxicological properties of the product itself is not available Dangerous health implications: In case of exposure that is repetitive, prolonged or at concentrations higher than recommended by the occupational exposure limits, it may result in adverse effects on health depending on the means of exposure: A- Ingestion (acute effect): - Acute toxicity : Based on available data, the classification criteria are not met, however, it contains substances classified as dangerous for consumption. For more information see section 3. - Corrosivity/Irritability: Based on available data, the classification criteria are not met. However, it does contain substances classified as hazardous for this effect. For more information see section 3. B- Inhalation (acute effect): - Acute toxicity : Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for inhalation. For more information see section 3. - Corrosivity/Irritability: Based on available data, the classification criteria are not met. However, it does contain substances classified as hazardous for this effect. For more information see section 3. C- Contact with the skin and the eyes (acute effect): - Contact with the skin: Based on available data, the classification criteria are not met. However, it contains substances classified as hazardous for skin contact. For more information see section 3. - Contact with the eyes: Based on available data, the classification criteria are not met. However, it does contain substances classified as hazardous for this effect. For more information see section 3. D- CMR effects (carcinogenicity, mutagenicity and toxicity to reproduction): - Carcinogenicity: Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for the effects mentioned. For more information see section 3. IARC: Distillates (petroleum), hydrotreated heavy naphthenic , < 3 % IP 346(<20.5 cSt @ 40?C) (3); Distillates (petroleum), solvent-dewaxed heavy paraffinic, < 3 % DMSO ( > 7 cSt 40?C, < 20.5 cSt 40?C) (3) - Mutagenicity: Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for this effect. For more information see section 3. - Reproductive toxicity: Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for this effect. For more information see section 3. E- Sensitizing effects: - Respiratory: Based on available data, the classification criteria are not met, however, it contains substances classified as dangerous with sensitising effects. For more information see section 3. - Skin: Prolonged contact with the skin can result in episodes of allergic contact dermatitis. F- Specific target organ toxicity (STOT) - single exposure: Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for this effect. For more information see section 3. G- Specific target organ toxicity (STOT)-repeated exposure: - Specific target organ toxicity (STOT)-repeated exposure: Based on available data, the classification criteria are not met. However, it contains substances classified as hazardous for inhalation. For more information see section 3. - Skin: Based on available data, the classification criteria are not met, as it does not contain substances classified as hazardous for this effect. For more information see section 3. H- Aspiration hazard: Based on available data, the classification criteria are not met. However, it does contain substances classified as hazardous for this effect. For more information see section 3. Other information: Non-applicable Specific toxicology information on the substances: Identification Acute toxicity Genus Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts LD50 oral 3080 mg/kg Rat CAS: 68649-42-3 LD50 dermal Non-applicable LC50 inhalation Non-applicable - CONTINUED ON NEXT PAGE - Page 7/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 11: TOXICOLOGICAL INFORMATION (continued) Identification Acute toxicity Genus maleic anhydride LD50 oral 1090 mg/kg Rat CAS: 108-31-6 LD50 dermal 2620 mg/kg Rabbit LC50 inhalation >4.35 mg/L (4 h) Rat SECTION 12: ECOLOGICAL INFORMATION The experimental information related to the eco-toxicological properties of the product itself is not available 12.1 Ecotoxicity (aquatic and terrestrial, where available): Acute toxicity: Identification Concentration Species Genus maleic anhydride LC50 75 mg/L (96 h) Lepomis macrochirus Fish CAS: 108-31-6 EC50 42.81 mg/L (48 h) Daphnia magna Crustacean EC50 74.35 mg/L (72 h) Raphidocelis subcapitata Algae 12.2 Persistence and degradability: Substance-specific information: Identification Degradability Biodegradability maleic anhydride BOD5 Non-applicable Concentration 33.33 mg/L CAS: 108-31-6 COD Non-applicable Period 29 days BOD5/COD Non-applicable % Biodegradable 98.19 % 12.3 Bioaccumulative potential: Substance-specific information: Identification Bioaccumulation potential maleic anhydride BCF CAS: 108-31-6 Pow Log -2.61 Potential 12.4 Mobility in soil: Identification Absorption/desorption Volatility maleic anhydride Koc 42 Henry 0E+0 Pa?m?/mol CAS: 108-31-6 Conclusion Very High Dry soil Non-applicable Surface tension 1.673E-2 N/m (482.38?F) Moist soil Non-applicable 12.5 Results of PBT and vPvB assessment: Non-applicable 12.6 Other adverse effects: Not described SECTION 13: DISPOSAL CONSIDERATIONS 13.1 Disposal methods: Waste management (disposal and evaluation): Consult the authorized waste service manager on the assessment and disposal operations. In case the container has been in direct contact with the product, it will be processed the same way as the actual product. Otherwise, it will be processed as non- dangerous residue. Waste should not be disposed of to drains. See epigraph 6.2. Regulations related to waste management: Legislation related to waste management: 40 CFR Part 261- IDENTIFICATION AND LISTING OF HAZARDOUS WASTE SECTION 14: TRANSPORT INFORMATION - CONTINUED ON NEXT PAGE - Page 8/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 14: TRANSPORT INFORMATION (continued) This product is not regulated for transport. SECTION 15: REGULATORY INFORMATION 15.1 Safety, health and environmental regulations specific for the product in question: - CALIFORNIA LABOR CODE - The Hazardous Substances List: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - California Proposition 65 (the Safe Drinking Water and Toxic Enforcement Act of 1986) - Birth defects or other reproductive harm: Non-applicable - California Proposition 65 (the Safe Drinking Water and Toxic Enforcement Act of 1986) - Cancer: Non-applicable - CANADA-Domestic Substances List (DSL): Distillates (petroleum), hydrotreated heavy naphthenic , < 3 % IP 346(<20.5 cSt @ 40?C) (64742-52-5) ; Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - CANADA-Non-Domestic Substances List (NDSL): Non-applicable - Hazardous Air Pollutants (Clean Air Act): maleic anhydride (108-31-6) - Massachusetts RTK - Substance List: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - Minnesota - Hazardous substances ERTK: maleic anhydride (108-31-6) - New Jersey Worker and Community Right-to-Know Act: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - New York RTK - Substance list: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - NTP (National Toxicology Program): Non-applicable - OSHA Specifically Regulated Substances (29 CFR 1910.1001-1096): Non-applicable - Pennsylvania Worker and Community Right-to-Know Law: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - Rhode Island - Hazardous substances RTK: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - The Toxic Substances Control Act (TSCA) : Distillates (petroleum), hydrotreated heavy naphthenic , < 3 % IP 346(<20.5 cSt @ 40?C) (64742-52-5) ; Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) - Toxic chemical release reporting under EPCRA section 313 (40 CFR Part 372): Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (68649-42-3) ; maleic anhydride (108-31-6) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) - Reportable Quantities: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts (1 pounds) ; maleic anhydride (5000 pounds) Specific provisions in terms of protecting people or the environment: It is recommended to use the information included in this safety data sheet as data used in a risk evaluation of the local circumstances in order to establish the necessary risk prevention measures for the manipulation, use, storage and disposal of this product. Other legislation: Take into consideration other applicable federal, state, and local laws and local regulations. SECTION 16: OTHER INFORMATION Legislation related to safety data sheets: This safety data sheet has been designed in accordance with Appendix d to ?1910.1200 - Safety data sheets Texts of the legislative phrases mentioned in section 2: H317: May cause an allergic skin reaction. Texts of the legislative phrases mentioned in section 3: The phrases indicated do not refer to the product itself; they are present merely for informative purposes and refer to the individual components which appear in section 3 29 CFR 1910.1200: - CONTINUED ON NEXT PAGE - Page 9/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 SECTION 16: OTHER INFORMATION (continued) Acute Tox. 4: H302 - Harmful if swallowed. Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways. Eye Dam. 1: H318 - Causes serious eye damage. Eye Irrit. 2A: H319 - Causes serious eye irritation. Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Corr. 1B: H314 - Causes severe skin burns and eye damage. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1A: H317 - May cause an allergic skin reaction. STOT RE 1: H372 - Causes damage to organs through prolonged or repeated exposure (Inhalation). Advice related to training: Minimal training is recommended to prevent industrial risks for staff using this product, in order to facilitate their comprehension and interpretation of this safety data sheet, as well as the label on the product. Principal bibliographical sources: Occupational Safety & Health Administration (OSHA). Abbreviations and acronyms: IMDG: International maritime dangerous goods code IATA: International Air Transport Association ICAO: International Civil Aviation Organisation COD: Chemical Oxygen Demand BOD5: 5-day biochemical oxygen demand BCF: Bioconcentration factor LD50: Lethal Dose 50 CL50: Lethal Concentration 50 EC50: Effective concentration 50 Log-POW: Octanol-water partition coefficient Koc: Partition coefficient of organic carbon IARC: International Agency for Research on Cancer Date of compilation: 03/09/2023 Manufacturer Disclaimer: The information contained in this safety date sheet (?SDS?) is based on sources, technical knowledge and current legislation. Furthermore, is based on data believed to be accurate; thus, the company does not assume any liability for its accuracy. The information provided herein cannot be considered a guarantee of the properties of this product and the same is simply a description of the security requirements. The use, occupational methodology and/or conditions for users of this product are not within our awareness or control. It is ultimately the responsibility of the user(s) to take the necessary measures to obtain the legal requirements concerning the manipulation, storage, use and disposal of chemical products. The information of this SDS only refers to this product, which should not be used for purposes other than those specified. Finally, the manner in which this product is used and whether there is any infringement of patents is the sole responsibility of the user(s). END OF SAFETY DATA SHEET Page 10/10 Safety Data Sheet (SDS) B?laster Pro-Grade Multi-Purpose Grease Date of compilation: 03/09/2023 Safety data sheet of LUBRAL LITHIUM EP 2 (Version 4) 1 - IDENTIFICATION 2 - HAZARD(S) IDENTIFICATION 3 - COMPOSITION/INFORMATION ON INGREDIENTS 4 - FIRST-AID MEASURES 5 - FIRE-FIGHTING MEASURES 6 - ACCIDENTAL RELEASE MEASURES 7 - HANDLING AND STORAGE 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES 10 - STABILITY AND REACTIVITY 11 - TOXICOLOGICAL INFORMATION 12 - ECOLOGICAL INFORMATION 13 - DISPOSAL CONSIDERATIONS 14 - TRANSPORT INFORMATION 15 - REGULATORY INFORMATION 16 - OTHER INFORMATION