SAFETY DATA SHEET1. Identification Liquid Wrench Light Machine OilProduct identifierOther means of identification L1004SDS number L1004Part No. 3403.19.1000Tariff code LubricantRecommended use None known.Recommended restrictionsManufacturer/Importer/Supplier/Distributor informationManufacturer2. Hazard(s) identification Not classified.Physical hazards Category 1Aspiration hazardHealth hazards Not classified.Environmental hazards Not classified.OSHA defined hazardsLabel elementsSignal word DangerHazard statement May be fatal if swallowed and enters airways.Precautionary statementPrevention Observe good industrial hygiene practices.Response If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting.Storage Store locked up.Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwiseclassified (HNOC) None known.Supplemental information NOTE: This product is a consumer product and is labeled in accordance with the US ConsumerProduct Safety Commission regulations which take precedence over OSHA HazardCommunication labeling. The container label may not include the OSHA label elements listed inthis document. Always carefully review the entire SDS and the product label prior to use in theworkplace.3. Composition/information on ingredientsMixtures 1 / 7Material name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 SDS USCompany nameAddressTelephoneWebsiteE-mailEmergency phone number Blaster LLC8500 Sweet Valley Drive Valley View, Ohio 44125 - USA T(216)901-5800F (216)901-5801www.blastercorp.comChemtrec (800) 424-9300 CAS number %Chemical name Common name and synonyms 64742-54-7Distillates(petroleum), HydrotreatedHeavy Paraffinic 90 - 100*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.4. First-aid measures Move to fresh air. Call a physician if symptoms develop or persist.Inhalation Wash off with soap and water. Get medical attention if irritation develops and persists.Skin contact Rinse with water. Get medical attention if irritation develops and persists.Eye contact Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. Ifvomiting occurs, keep head low so that stomach content doesn't get into the lungs.Ingestion Aspiration may cause pulmonary edema and pneumonitis.Most importantsymptoms/effects, acute anddelayed Provide general supportive measures and treat symptomatically. Keep victim under observation.Symptoms may be delayed.Indication of immediatemedical attention and specialtreatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions toprotect themselves.General information5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishingmedia During fire, gases hazardous to health may be formed.Specific hazards arising fromthe chemical Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefighters Move containers from fire area if you can do so without risk.Fire fightingequipment/instructions Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods No unusual fire or explosion hazards noted.General fire hazards6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wearappropriate protective equipment and clothing during clean-up. Ensure adequate ventilation. Localauthorities should be advised if significant spillages cannot be contained. For personal protection,see section 8 of the SDS.Personal precautions,protective equipment andemergency procedures Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this ispossible. Absorb in vermiculite, dry sand or earth and place into containers. Following productrecovery, flush area with water.Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly toremove residual contamination.Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.Methods and materials forcontainment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions7. Handling and storage Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protectiveequipment. Wash hands thoroughly after handling. Observe good industrial hygiene practices.Precautions for safe handling Store locked up. Store in tightly closed container. Store away from incompatible materials (seeSection 10 of the SDS).Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionOccupational exposure limitsThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.At this time, the other constituents have no known exposure limits. 2 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) FormValueComponents TypePEL 5 mg/m3 Mist.Distillates(petroleum),Hydrotreated HeavyParaffinic (CAS64742-54-7)US. ACGIH Threshold Limit Values FormValueComponents TypeTWA 5 mg/m3 Inhalable fraction.Distillates(petroleum),Hydrotreated HeavyParaffinic (CAS64742-54-7)US. NIOSH: Pocket Guide to Chemical Hazards FormValueComponents TypeSTEL 10 mg/m3 Mist.Distillates(petroleum),Hydrotreated HeavyParaffinic (CAS64742-54-7) TWA 5 mg/m3 Mist.No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,or other engineering controls to maintain airborne levels below recommended exposure limits. Ifexposure limits have not been established, maintain airborne levels to an acceptable level.Appropriate engineeringcontrolsIndividual protection measures, such as personal protective equipmentFace shield is recommended. Wear safety glasses with side shields (or goggles).Eye/face protectionSkin protection Wear appropriate chemical resistant gloves.Hand protection Wear appropriate chemical resistant clothing.Other In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator withorganic vapor cartridge and full facepiece if threshold limits are exceeded.Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking. Routinely wash work clothing and protectiveequipment to remove contaminants.General hygieneconsiderations9. Physical and chemical propertiesClear.Appearance Liquid.Physical state Liquid.Form water-whiteColor Slight hydrocarbonOdorOdor threshold Not available.pH Not available.Melting point/freezing point Not available.Initial boiling point and boilingrange > 406.4 ?F (> 208 ?C)Flash point > 390.2 ?F (> 199.0 ?C) Cleveland Open CupEvaporation rate Not available.Not applicable.Flammability (solid, gas)Upper/lower flammability or explosive limitsFlammability limit - lower(%) Not available. 3 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 Flammability limit - upper(%) Not available.Explosive limit - lower (%) Not available.Explosive limit - upper (%) Not available.Vapor pressure < 0.0005 kPa @ 20 C (68 F)Vapor density Not available.Relative density Not available.Solubility(ies)Solubility (water) Not available.Partition coefficient(n-octanol/water) Not available.Auto-ignition temperature > 608 ?F (> 320 ?C)Decomposition temperature Not available.Viscosity 18 - 22 cStViscosity temperature 104 ?F (40 ?C)Other informationDensity 830 kg/m? @ 15 C (59 F)Not explosive.Explosive propertiesFlammability class Combustible IIIB estimatedNot oxidizing.Oxidizing propertiesSpecific gravity 0.83 @ 15 C (59 F) Water = 1VOC 0 % w/w10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability No dangerous reaction known under conditions of normal use.Possibility of hazardousreactions Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Contact withincompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials No hazardous decomposition products are known.Hazardous decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalation Prolonged inhalation may be harmful.Skin contact No adverse effects due to skin contact are expected.Eye contact Direct contact with eyes may cause temporary irritation.Ingestion Droplets of the product aspirated into the lungs through ingestion or vomiting may cause a seriouschemical pneumonia.Symptoms related to thephysical, chemical andtoxicological characteristics Aspiration may cause pulmonary edema and pneumonitis.Information on toxicological effectsAcute toxicity May be fatal if swallowed and enters airways. Test ResultsComponents SpeciesDistillates(petroleum), Hydrotreated Heavy Paraffinic (CAS 64742-54-7)DermalAcuteLD50 Rabbit > 2000 mg/kg, 24 Hours 4 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 Test ResultsComponents SpeciesInhalationLC50 Rat > 3.9 mg/l, 4 HoursOralLD50 Rat > 2000 mg/kgProlonged skin contact may cause temporary irritation.Skin corrosion/irritation Direct contact with eyes may cause temporary irritation.Serious eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitization Not a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.Germ cell mutagenicityCarcinogenicity Not classifiable as to carcinogenicity to humans.IARC Monographs. Overall Evaluation of CarcinogenicityDistillates(petroleum), Hydrotreated Heavy Paraffinic(CAS 64742-54-7) 3 Not classifiable as to carcinogenicity to humans.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)Not regulated.US. National Toxicology Program (NTP) Report on CarcinogensNot listed. This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposure Not classified.Specific target organ toxicity -repeated exposure Not classified.Aspiration hazard May be fatal if swallowed and enters airways.Chronic effects Prolonged inhalation may be harmful.12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude thepossibility that large or frequent spills can have a harmful or damaging effect on the environment.Ecotoxicity No data is available on the degradability of any ingredients in the mixture.Persistence and degradability No data available.Bioaccumulative potential No data available.Mobility in soilOther adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose ofcontents/container in accordance with local/regional/national/international regulations.Disposal instructions Dispose in accordance with all applicable regulations.Local disposal regulations The waste code should be assigned in discussion between the user, the producer and the wastedisposal company.Hazardous waste code Dispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Waste from residues / unusedproducts Since emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.Contaminated packaging14. Transport informationDOTNot regulated as dangerous goods.IATANot regulated as dangerous goods. 5 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 IMDGNot regulated as dangerous goods.Not established.Transport in bulk according toAnnex II of MARPOL 73/78 andthe IBC Code15. Regulatory informationThis product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.US federal regulationsTSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)Not regulated.SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Not listed. YesSARA 311/312 Hazardouschemical Acute toxicity (any route of exposure)Aspiration hazardClassified hazardcategoriesSARA 313 (TRI reporting)Not regulated.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated. Not regulated.Safe Drinking Water Act(SDWA)US state regulationsCalifornia Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 2016 (Proposition 65): This materialis not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Formore information go to www.P65Warnings.ca.gov.US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3,subd. (a))Distillates(petroleum), Hydrotreated Heavy Paraffinic (CAS 64742-54-7)International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial ChemicalSubstances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory 6 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019 Country(s) or region Inventory name On inventory (yes/no)*YesPhilippines Philippine Inventory of Chemicals and Chemical Substances(PICCS) YesTaiwan Taiwan Chemical Substance Inventory (TCSI) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revision06-18-2019Issue dateRevision dateVersion #HMIS? ratings 02-23-202304Health: 1 Flammability: 1 Physical hazard: 0Health: 1 Flammability: 1 Instability: 0NFPA ratingsNFPA ratings 01 1The information provided in this Safety Data Sheet is correct to the best of our knowledge,information and belief at the date of its publication. The information given is designed only as aguidance for safe handling, use, processing, storage, transportation, disposal and release and isnot to be considered a warranty or quality specification. The information relates only to the specificmaterial designated and may not be valid for such material used in combination with any othermaterials or in any process, unless specified in the text.Disclaimer 7 / 7SDS USMaterial name: Liquid Wrench Light Machine OilL1004 Version #: 04 Revision date: 02-23-2023 Issue date: 06-18-2019