SDS Repository

sds

Collection
Motor Medic
Description
L616 10.25OZ LIQUID WRENCH WHITE LITH GREASE
Tags
Search Tag
Filename
L616_EN.pdf
Source
 
Full Text
SAFETY DATA SHEET1. Identification Liquid Wrench White Lithium GreaseProduct identifierOther means of identification L616SDS number L616, L616/4Part No. 2710.19.4000Tariff code GreaseRecommended use None known.Recommended restrictionsManufacturer/Importer/Supplier/Distributor informationManufacturerAddressCompany nameEmergency phone number Chem (United States) (800) 255-3924INFOTRAC (International) (352) 323-3500TelephoneWebsite www.blastercorp.com 2. Hazard(s) identification Category 1Flammable aerosolsPhysical hazards Category 4Acute toxicity, oralHealth hazards Category 2Skin corrosion/irritation Category 2ASerious eye damage/eye irritation Category 3 narcotic effectsSpecific target organ toxicity, single exposureNot classified.Environmental hazards Not classified.OSHA defined hazardsLabel elementsSignal word DangerHazard statement Extremely flammable aerosol. Contains gas under pressure; may explode if heated. Harmful ifswallowed. Causes skin irritation. Causes serious eye irritation. May cause drowsiness ordizziness.Precautionary statementPrevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an openflame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoidbreathing mist/vapor. Wash thoroughly after handling. Do not eat, drink or smoke when using thisproduct. Use only outdoors or in a well-ventilated area. Wear eye protection/face protection. Wearprotective gloves.Response If swallowed: Call a poison center/doctor if you feel unwell. Rinse mouth. If on skin: Wash withplenty of water. If inhaled: Remove person to fresh air and keep comfortable for breathing. If ineyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easyto do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin irritation occurs: Getmedical advice/attention. If eye irritation persists: Get medical advice/attention. Take offcontaminated clothing and wash before reuse. 1 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS USBlaster LLC8500 Sweet Valley DriveValley View, Ohio 44125 - USAT (216) 901-5800 F (216)901-5801 Storage Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect fromsunlight. Do not expose to temperatures exceeding 50?C/122?F.Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwiseclassified (HNOC) Combustible.Supplemental information NOTE: This product is a consumer product and is labeled in accordance with the US ConsumerProduct Safety Commission regulations which take precedence over OSHA HazardCommunication labeling. The container label may not include the OSHA label elements listed inthis document. Always carefully review the entire SDS and the product label prior to use in theworkplace.3. Composition/information on ingredientsMixtures CAS number %Chemical name Common name and synonyms 64742-47-8Distillates (petroleum),Hydrotreated Light 40 - < 5064742-65-0Distillates, Petroleum,Solvent-dewaxed Heavy Paraffinic 20 - < 3064742-52-5Distillates (petroleum),Hydrotreated Heavy Naphthenic 10 - < 2074-98-6Propane 5 - < 101 - < 3Other components below reportable levels 1314-13-2Zinc Oxide 1 - < 3*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISONCENTER or doctor/physician if you feel unwell.Inhalation Remove contaminated clothing. Wash with plenty of soap and water. If skin irritation occurs: Getmedical advice/attention. Wash contaminated clothing before reuse.Skin contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.Eye contact Rinse mouth. Do not induce vomiting without advice from poison control center. If vomiting occurs,keep head low so that stomach content doesn't get into the lungs. Get medical advice/attention ifyou feel unwell.Ingestion May cause drowsiness and dizziness. Headache. Nausea, vomiting. Diarrhea. Severe eyeirritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skinirritation. May cause redness and pain.Most importantsymptoms/effects, acute anddelayed Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victimunder observation. Symptoms may be delayed.Indication of immediatemedical attention and specialtreatment needed Ensure that medical personnel are aware of the material(s) involved, and take precautions toprotect themselves. Show this safety data sheet to the doctor in attendance.General information5. Fire-fighting measures Alcohol resistant foam. Powder. Dry chemicals. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishingmedia Contents under pressure. Pressurized container may explode when exposed to heat or flame.During fire, gases hazardous to health may be formed.Specific hazards arising fromthe chemical Firefighters must use standard protective equipment including flame retardant coat, helmet withface shield, gloves, rubber boots, and in enclosed spaces, SCBA.Special protective equipmentand precautions for firefighters Move containers from fire area if you can do so without risk. Cool containers exposed to heat withwater spray and remove container, if no risk is involved. Containers should be cooled with water toprevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder ormonitor nozzles, if possible. If not, withdraw and let fire burn out.Fire fightingequipment/instructions Use standard firefighting procedures and consider the hazards of other involved materials. Movecontainers from fire area if you can do so without risk. In the event of fire and/or explosion do notbreathe fumes.Specific methods Extremely flammable aerosol. Combustible.General fire hazards 2 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US 6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wearappropriate protective equipment and clothing during clean-up. Avoid breathing mist/vapor. Do nottouch damaged containers or spilled material unless wearing appropriate protective clothing.Ventilate closed spaces before entering them. Local authorities should be advised if significantspillages cannot be contained. For personal protection, see section 8 of the SDS.Personal precautions,protective equipment andemergency procedures Refer to attached safety data sheets and/or instructions for use. Stop leak if you can do so withoutrisk. Move the cylinder to a safe and open area if the leak is irreparable. Use water spray to reducevapors or divert vapor cloud drift. Eliminate all ignition sources (no smoking, flares, sparks, orflames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material.The product is immiscible with water and will spread on the water surface. Absorb in vermiculite,dry sand or earth and place into containers. Following product recovery, flush area with water.Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly toremove residual contamination. For waste disposal, see section 13 of the SDS.Methods and materials forcontainment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions7. Handling and storage Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missingor defective. Do not spray on a naked flame or any other incandescent material. Do not smokewhile using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, orexpose containers to heat, flame, sparks, or other sources of ignition. All equipment used whenhandling the product must be grounded. Do not re-use empty containers. Do not taste or swallow.Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated contact with skin. Avoidprolonged exposure. When using, do not eat, drink or smoke. Use only in well-ventilated areas.Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Observegood industrial hygiene practices.Precautions for safe handling Level 3 Aerosol.Store locked up. Pressurized container. Protect from sunlight and do not expose to temperaturesexceeding 50?C/122 ?F. Do not puncture, incinerate or crush. Do not handle or store near an openflame, heat or other sources of ignition. This material can accumulate static charge which maycause spark and become an ignition source. Store in tightly closed container. Store away fromincompatible materials (see Section 10 of the SDS).Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionOccupational exposure limitsThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.At this time, the other constituents have no known exposure limits.US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) FormValueComponents TypePEL 5 mg/m3 Mist.Distillates (petroleum),Hydrotreated HeavyNaphthenic (CAS64742-52-5) 2000 mg/m3500 ppmPEL 400 mg/m3Distillates (petroleum),Hydrotreated Light (CAS64742-47-8) 100 ppmPEL 5 mg/m3 Mist.Distillates, Petroleum,Solvent-dewaxed HeavyParaffinic (CAS64742-65-0) 2000 mg/m3500 ppmPEL 1800 mg/m3Propane (CAS 74-98-6) 1000 ppmPEL 5 mg/m3 Respirable fraction.Zinc Oxide (CAS1314-13-2) 3 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) FormValueComponents Type 5 mg/m3 Fume.15 mg/m3 Total dust.US. ACGIH Threshold Limit Values FormValueComponents TypeTWA 5 mg/m3 Inhalable fraction.Distillates (petroleum),Hydrotreated HeavyNaphthenic (CAS64742-52-5) TWA 5 mg/m3 Inhalable fraction.Distillates, Petroleum,Solvent-dewaxed HeavyParaffinic (CAS64742-65-0) STEL 10 mg/m3 Respirable fraction.Zinc Oxide (CAS1314-13-2) TWA 2 mg/m3 Respirable fraction.US. NIOSH: Pocket Guide to Chemical Hazards FormValueComponents TypeCeiling 1800 mg/m3Distillates (petroleum),Hydrotreated HeavyNaphthenic (CAS64742-52-5) STEL 10 mg/m3 Mist.TWA 100 mg/m3Distillates (petroleum),Hydrotreated Light (CAS64742-47-8) Ceiling 1800 mg/m3Distillates, Petroleum,Solvent-dewaxed HeavyParaffinic (CAS64742-65-0) STEL 10 mg/m3 Mist.TWA 1800 mg/m3Propane (CAS 74-98-6) 1000 ppmCeiling 15 mg/m3 Dust.Zinc Oxide (CAS1314-13-2) STEL 10 mg/m3 Fume.TWA 5 mg/m3 Fume.5 mg/m3 Dust.No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation ratesshould be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,or other engineering controls to maintain airborne levels below recommended exposure limits. Ifexposure limits have not been established, maintain airborne levels to an acceptable level. Provideeyewash station and safety shower.Appropriate engineeringcontrolsIndividual protection measures, such as personal protective equipmentFace shield is recommended. Wear safety glasses with side shields (or goggles).Eye/face protectionSkin protection Wear appropriate chemical resistant gloves.Hand protection Wear appropriate chemical resistant clothing.Other If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or anair-supplied respirator. Chemical respirator with organic vapor cartridge and full facepiece ifthreshold limits are exceeded. Dust & vapor respirator.Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards 4 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US When using do not smoke. Keep away from food and drink. Always observe good personalhygiene measures, such as washing after handling the material and before eating, drinking, and/orsmoking. Routinely wash work clothing and protective equipment to remove contaminants.General hygieneconsiderations9. Physical and chemical propertiesOpaque ViscousAppearance Liquid.Physical state Aerosol.Form Milky. Light yellow.Color Sweet VanillaOdorOdor threshold Not available.pH Not available.Melting point/freezing point -114.53 ?F (-81.4 ?C) estimatedInitial boiling point and boilingrange 422.23 ?F (216.8 ?C) estimatedFlash point 129.0 ?F (53.9 ?C) estimatedEvaporation rate Not available.Not applicable.Flammability (solid, gas)Upper/lower flammability or explosive limitsFlammability limit - lower(%) 1 % estimatedFlammability limit - upper(%) 5.7 % estimatedExplosive limit - lower (%) Not available.Explosive limit - upper (%) Not available.Vapor pressure 886.99714 hPa estimatedVapor density Not available.Relative density Not available.Solubility(ies)Solubility (water) InsolublePartition coefficient(n-octanol/water) Not available.Auto-ignition temperature 508.3 ?F (264.61 ?C) estimatedDecomposition temperature Not available.Viscosity Not available.Other informationDensity 7.39218 lbs/gal estimatedNot explosive.Explosive propertiesFlammability (flash back) NoFlammability class Combustible II estimatedHeat of combustion 36.05 kJ/gHeat of combustion (NFPA30B) 36.02 kJ/g estimatedKinematic viscosity > 300 cStNot oxidizing.Oxidizing propertiesSpecific gravity 0.88582 estimatedVOC 9 % w/w10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability Hazardous polymerization does not occur.Possibility of hazardousreactions 5 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Avoidtemperatures exceeding the flash point. Contact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials No hazardous decomposition products are known.Hazardous decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalation May cause drowsiness and dizziness. Headache. Nausea, vomiting. Prolonged inhalation may beharmful.Skin contact Causes skin irritation.Eye contact Causes serious eye irritation.Ingestion Harmful if swallowed.Symptoms related to thephysical, chemical andtoxicological characteristics May cause drowsiness and dizziness. Headache. Nausea, vomiting. Diarrhea. Severe eyeirritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skinirritation. May cause redness and pain.Information on toxicological effectsAcute toxicity Harmful if swallowed. Test ResultsComponents SpeciesDistillates (petroleum), Hydrotreated Heavy Naphthenic (CAS 64742-52-5)DermalAcuteLD50 Rabbit > 2000 mg/kg, 24 HoursInhalationLC50 Rat > 3.9 mg/l, 4 HoursOralLD50 Rat > 2000 mg/kgDistillates (petroleum), Hydrotreated Light (CAS 64742-47-8)DermalAcuteLD50 Rabbit > 2000 mg/kg, 24 HoursInhalationLC50 Rat > 0.1 mg/l, 8 HoursVaporOralLD50 Rat > 5000 mg/kgDistillates, Petroleum, Solvent-dewaxed Heavy Paraffinic (CAS 64742-65-0)DermalAcuteLD50 Rabbit > 2000 mg/kg, 24 HoursInhalationLC50 Rat > 3.9 mg/l, 4 HoursOralLD50 Rat > 2000 mg/kgZinc Oxide (CAS 1314-13-2)InhalationAcuteLC50 Mouse > 5.7 mg/l, 4 HoursOralLD50 Rat > 5 g/kgCauses skin irritation.Skin corrosion/irritation 6 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US Causes serious eye irritation.Serious eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitization Not a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.Germ cell mutagenicityCarcinogenicity Not classifiable as to carcinogenicity to humans.IARC Monographs. Overall Evaluation of CarcinogenicityDistillates, Petroleum, Solvent-dewaxed Heavy Paraffinic(CAS 64742-65-0) 3 Not classifiable as to carcinogenicity to humans.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)Not regulated.US. National Toxicology Program (NTP) Report on CarcinogensNot listed. This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposure May cause drowsiness and dizziness.Specific target organ toxicity -repeated exposure Not classified.Aspiration hazard Not an aspiration hazard.Chronic effects Prolonged inhalation may be harmful.12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude thepossibility that large or frequent spills can have a harmful or damaging effect on the environment.EcotoxicityComponents Test ResultsSpeciesDistillates (petroleum), Hydrotreated Light (CAS 64742-47-8)Aquatic EC50Crustacea 2.7 - 5.1 mg/l, 48 hoursWater flea (Daphnia pulex)LC50Fish 2.9 mg/l, 96 hoursRainbow trout,donaldson trout(Oncorhynchus mykiss)Zinc Oxide (CAS 1314-13-2)Aquatic LC50Fish 2246 mg/l, 96 hoursFathead minnow (Pimephales promelas)No data is available on the degradability of any ingredients in the mixture.Persistence and degradabilityBioaccumulative potentialPartition coefficient n-octanol / water (log Kow)Propane 2.36No data available.Mobility in soilOther adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Contentsunder pressure. Do not puncture, incinerate or crush. Incinerate the material under controlledconditions in an approved incinerator. If discarded, this product is considered a RCRA ignitablewaste, D001. Dispose of contents/container in accordance with local/regional/national/internationalregulations.Disposal instructions Dispose in accordance with all applicable regulations.Local disposal regulations D001: Waste Flammable material with a flash point <140 FThe waste code should be assigned in discussion between the user, the producer and the wastedisposal company.Hazardous waste code Dispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Waste from residues / unusedproducts 7 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US Since emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal. Do not re-use empty containers.Contaminated packaging14. Transport informationDOT UN1950UN number Aerosol, flammable, Limited QuantityUN proper shipping name 2.1ClassTransport hazard class(es) -Subsidiary risk Not available.Packing group NoMarine pollutantEnvironmental hazards Read safety instructions, SDS and emergency procedures before handling.Special precautions for user 306Packaging exceptions 302, 304Packaging non bulk 302, 314, 315Packaging bulkIATA UN1950UN number Aerosols, flammable, Limited QuantityUN proper shipping name 2.1ClassTransport hazard class(es) -Subsidiary risk IIIPacking group NoEnvironmental hazards 9LERG Code Read safety instructions, SDS and emergency procedures before handling.Special precautions for user Allowed with restrictions.Passenger and cargoaircraftOther information Allowed with restrictions.Cargo aircraft onlyIMDG UN1950UN number Aerosols, flammable, Limited QuantityUN proper shipping name 2.1ClassTransport hazard class(es) -Subsidiary risk Not available.Packing group NoMarine pollutantEnvironmental hazards F-D, S-UEmS Read safety instructions, SDS and emergency procedures before handling.Special precautions for user Not established.Transport in bulk according toAnnex II of MARPOL 73/78 andthe IBC CodeDOT; IMDG 8 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US IATA15. Regulatory informationThis product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.US federal regulationsTSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Propane (CAS 74-98-6) Listed.Zinc Oxide (CAS 1314-13-2) Listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)Not regulated.SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Not listed. YesSARA 311/312 Hazardouschemical Flammable (gases, aerosols, liquids, or solids)Acute toxicity (any route of exposure)Skin corrosion or irritationSerious eye damage or eye irritationSpecific target organ toxicity (single or repeated exposure)Classified hazardcategoriesSARA 313 (TRI reporting)Chemical name % by wt.CAS numberZinc Oxide 1 - < 31314-13-2Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Propane (CAS 74-98-6) Not regulated.Safe Drinking Water Act(SDWA)US state regulationsCalifornia Proposition 65 This product can expose you to Titanium Dioxide, which is known to the State of California tocause cancer. For more information go to www.P65Warnings.ca.gov.WARNING:California Proposition 65 - CRT: Listed date/Carcinogenic substanceTitanium Dioxide (CAS 13463-67-7) Listed: September 2, 2011US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3,subd. (a))Distillates (petroleum), Hydrotreated Heavy Naphthenic (CAS 64742-52-5)Distillates, Petroleum, Solvent-dewaxed Heavy Paraffinic (CAS 64742-65-0)International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*YesAustralia Australian Inventory of Chemical Substances (AICS) 9 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US Country(s) or region Inventory name On inventory (yes/no)*NoCanada Domestic Substances List (DSL) YesCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial ChemicalSubstances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory NoPhilippines Philippine Inventory of Chemicals and Chemical Substances(PICCS) YesTaiwan Taiwan Chemical Substance Inventory (TCSI) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revision04-29-2015Issue dateRevision dateVersion #HMIS? ratings 02-28-202315Health: 2* Flammability: 1 Physical hazard: 0Health: 2 Flammability: 1 Instability: 0NFPA ratingsNFPA ratings 02 1The information provided in this Safety Data Sheet is correct to the best of our knowledge,information and belief at the date of its publication. The information given is designed only as aguidance for safe handling, use, processing, storage, transportation, disposal and release and isnot to be considered a warranty or quality specification. The information relates only to the specificmaterial designated and may not be valid for such material used in combination with any othermaterials or in any process, unless specified in the text.Disclaimer Composition / Information on Ingredients: IngredientsPhysical & Chemical Properties: Multiple PropertiesRegulatory information: California Proposition 65Regulatory information: US state regulationsRevision information 10 / 10Material name: Liquid Wrench White Lithium GreaseL616, L616/4 Version #: 15 Revision date: 02-28-2023 Issue date: 04-29-2015 SDS US