SAFETY DATA SHEET Revision Date 04-Apr-2020 Version 1 1. IDENTIFICATION Product identifier Product Name Rain-X Ceramic Detailer Other means of identification Product Code 620300 Document sku 620161, 620161W Recommended use of the chemical and restrictions on use Recommended Use Exterior Paint Surfaces Uses advised against No information available Details of the supplier of the safety data sheet Company Phone Number 1-855-888-1988 24-hour emergency phone number (CHEMTREC) 1-800-424-9300 or 1-703-527-3887 (U.S.) (RMPDC) 1-877-504-9352 (U.S.) E-mail address: This email address is being protected from spambots. You need JavaScript enabled to view it. 2. HAZARDS IDENTIFICATION Classification OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Serious eye damage/eye irritation Category 2B Label elements Emergency Overview Supplier Address ITW Global Brands 16200 Park Row, Suite 120 Houston, TX 77084 Manufacturer Address Manufactured and Distributed by: Distributor May Also Be Distributed by: ITW Permatex Canada 101-2360 Bristol Circle Oakville, ON Canada L6H 6M5 Telephone: (800) 924-6994 Signal word Warning Causes serious eye irritation _____________________________________________________________________________________________ Page 1 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Precautionary Statements - Prevention Avoid breathing mists or vapors Wash hands and face thoroughly after handling Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Precautionary Statements - Response IF ON SKIN: Wash with plenty of soap and water IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing IF SKIN irritation occurs: rinse thoroughly and get medical advice If eye irritation persists: Get medical advice/attention Wash contaminated clothing before reuse Precautionary Statements - Storage Store away from incompatible materials Precautionary Statements - Disposal Dispose of contents/container in accordance with local, regional, national, and international regulations as applicable Hazards not otherwise classified (HNOC) Not applicable Other Information Not applicable. 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS No Weight-% Tetrasodium ethylenediamine tetraacetate 64-02-8 0.1 - 1 Sodium Hydroxide 50% 1310-73-2 <0.1 4. FIRST AID MEASURES Description of first aid measures General advice Get medical advice/attention if you feel unwell. Eye contact IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Skin contact IF ON SKIN:. Wash skin with soap and water. If skin irritation persists, call a physician. Take off contaminated clothing and wash before reuse. Inhalation IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If symptoms persist, call a physician. Ingestion IF SWALLOWED:. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician. Self-protection of the first aider Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. This product contains substances which at their given concentration, are considered to be hazardous to health Appearance Liquid Physical state Liquid Odor Slight Kerosene _____________________________________________________________________________________________ Page 2 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Most important symptoms and effects, both acute and delayed Symptoms See section 2 for more information. Indication of any immediate medical attention and special treatment needed Note to physicians Treat symptomatically. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media Water spray or fog is preferred; if water not available use dry chemical, CO2 or regular foam Unsuitable extinguishing media Do not use a solid water stream as it may scatter and spread fire Specific hazards arising from the chemical During fire, gases hazardous to health may be formed. Explosion data Sensitivity to Mechanical Impact None. Sensitivity to Static Discharge None. Protective equipment and precautions for firefighters Wear self-contained breathing apparatus and protective suit. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Personal precautions Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear protective gloves/protective clothing and eye/face protection. During clean up. Avoid breathing vapors or mists. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation, especially in confined areas. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Environmental precautions Environmental precautions See section 12 for additional ecological information. Methods and material for containment and cleaning up Methods for containment Large spills: Stop the flow of material, if this is no risk. Dike the spill material where this is possible. Absorb in vermiculite, dry sand or earth and place in containers. Following product recovery, flush area with water. Small spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residue contamination. Methods for cleaning up Ensure adequate ventilation. Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Use personal protective equipment as required. Prevention of secondary hazards Clean contaminated objects and areas thoroughly observing environmental regulations. 7. HANDLING AND STORAGE Precautions for safe handling Advice on safe handling Handle in accordance with good industrial hygiene and safety practice. Avoid breathing vapors or mists. Avoid contact with skin, eyes or clothing. Wash thoroughly after handling. Wash contaminated clothing before reuse. Use personal protective equipment as required. _____________________________________________________________________________________________ Page 3 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Incompatible materials Strong oxidizing agents 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Exposure Guidelines . Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Sodium Hydroxide 50% 1310-73-2 Ceiling: 2 mg/m3 TWA: 2 mg/m3 (vacated) Ceiling: 2 mg/m3 IDLH: 10 mg/m3 Ceiling: 2 mg/m3 NIOSH IDLH Immediately Dangerous to Life or Health Other Information Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962 (11th Cir., 1992). Appropriate engineering controls Engineering Controls Showers Eyewash stations Ventilation systems Individual protection measures, such as personal protective equipment Eye/face protection Wear safety glasses with side shields (or goggles). Skin and body protection Wear protective natural rubber, nitrile rubber, Neoprene? or PVC gloves. Respiratory protection Use NIOSH-approved air-purifying respirator with organic vapor cartridge or canister, as appropriate. General Hygiene Considerations Handle in accordance with good industrial hygiene and safety practice. Regular cleaning of equipment, work area and clothing is recommended. 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1. Information on basic physical and chemical properties Physical state Liquid Appearance Liquid Odor Slight Kerosene Color Milky White Odor threshold No information available Property Values Remarks ? Method pH 11.0 Melting point / freezing point No information available Boiling point / boiling range No information available Flash point No information available Evaporation rate No information available Flammability (solid, gas) No information available Flammability Limit in Air Upper flammability limit: No information available Lower flammability limit: No information available Vapor pressure No information available Vapor density No information available Relative density No information available Water solubility No information available Solubility(ies) No information available Partition coefficient No information available _____________________________________________________________________________________________ Page 4 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Explosive properties No information available Oxidizing properties No information available Other Information Softening point No information available Molecular weight No information available VOC Content (%) 0.001 Density 0.998 Bulk density No information available SADT (self-accelerating decomposition temperature) No information available 10. STABILITY AND REACTIVITY Reactivity Chemical stability Stable under normal conditions Possibility of Hazardous Reactions None under normal processing. Conditions to avoid Excessive heat. Incompatible materials Strong oxidizing agents Hazardous Decomposition Products Carbon oxides 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation Prolonged inhalation may be harmful. Eye contact Contact with eyes may cause irritation. Skin contact No Data Available. Ingestion Expected to be a low ingestion hazard. Chemical Name Oral LD50 Dermal LD50 Inhalation LC50 Tetrasodium ethylenediamine tetraacetate 64-02-8 = 10 g/kg ( Rat ) = 1658 mg/kg ( Rat ) - - Sodium Hydroxide 50% 1310-73-2 = 325 mg/kg ( Rat ) = 1350 mg/kg ( Rabbit ) - Information on toxicological effects Symptoms No information available. Delayed and immediate effects as well as chronic effects from short and long-term exposure Skin corrosion/irritation Prolonged skin contact may cause temporary irritation. Autoignition temperature No information available Decomposition temperature No information available Kinematic viscosity No information available Dynamic viscosity No information available This product is stable and non-reactive under normal conditions of use, storage and transport _____________________________________________________________________________________________ Page 5 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Serious eye damage/eye irritation Causes serious eye irritation. Irritation No information available. Corrosivity No information available. Sensitization No information available. Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic. Carcinogenicity Not classifiable as a human carcinogen. IARC (International Agency for Research on Cancer) Not Listed NTP (National Toxicology Program) Not Listed OSHA (Occupational Safety and Health Administration of the US Department of Labor) Not regulated Reproductive toxicity This product does not contain any known or suspected reproductive hazards. STOT - single exposure Not classified. STOT - repeated exposure Not classified. Aspiration hazard: Not an aspiration hazard. 12. ECOLOGICAL INFORMATION Ecotoxicity This product is not classified as an environmental hazard. However, this does not exclude the possibility that large of frequent spills can have a harmful or damaging effect on the environment. Persistence and degradability No information available. Bioaccumulation No information available. Mobility No information available. Chemical Name Partition coefficient Tetrasodium ethylenediamine tetraacetate 64-02-8 472- 500 mg/l Sodium Hydroxide 50% 1310-73-2 125 mg/l Other adverse effects No information available 13. DISPOSAL CONSIDERATIONS Waste treatment methods Disposal of wastes Disposal should be in accordance with applicable regional, national and local laws and regulations. Empty containers or lines may retain some product residues. This material and its containers must be disposed in a safe manner. See disposal instructions. Contaminated packaging Since empty containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. US EPA Waste Number No information available This product contains one or more substances that are listed with the State of California as a hazardous waste. _____________________________________________________________________________________________ Page 6 / 8 _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Chemical Name California Hazardous Waste Status Sodium Hydroxide 50% 1310-73-2 Toxic Corrosive 14. TRANSPORT INFORMATION DOT Proper shipping name: Not regulated IATA Proper shipping name: Not regulated IMDG Proper shipping name: Not regulated 15. REGULATORY INFORMATION International Inventories TSCA Complies DSL/NDSL Does not comply EINECS/ELINCS Does not comply ENCS Does not comply IECSC Complies KECL Does not comply PICCS Does not comply AICS Complies Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AICS - Australian Inventory of Chemical Substances US Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372 SARA 311/312 Hazard Categories Acute health hazard No Chronic Health Hazard No Fire hazard No Sudden release of pressure hazard No Reactive Hazard No CWA (Clean Water Act) This product contains the following substances which are regulated pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42) Chemical Name CWA - Reportable Quantities CWA - Toxic Pollutants CWA - Priority Pollutants CWA - Hazardous Substances Sodium Hydroxide 50% 1310-73-2 1000 lb - - X _____________________________________________________________________________________________ Page 7 / 8 CERCLA This material, as supplied, contains one or more substances regulated as a hazardous substance under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) _____________________________________________________________________________________________ 620300 - Rain-X Ceramic Detailer Revision Date 04-Apr-2020 Chemical Name Hazardous Substances RQs CERCLA/SARA RQ Reportable Quantity (RQ) Sodium Hydroxide 50% 1310-73-2 1000 lb - RQ 1000 lb final RQ RQ 454 kg final RQ US State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals U.S. State Right-to-Know Regulations U.S. EPA Label Information EPA Pesticide Registration Number Not applicable 16. OTHER INFORMATION, INCLUDING DATE OF PREPARATION OF THE LAST REVISION NFPA (National Fire Protection Association) HMIS (Hazardous Material Information System) Revision Date 04-Apr-2020 Disclaimer Illinois Tool Works Inc. believes the information contained in this data sheet is accurate as of the date compiled. However, Illinois Tool Works Inc. makes no warranty, express or implied, as to the accuracy, reliability or completeness of the information. User is responsible for evaluating whether such information or this product is fit for a particular purpose and suitable for a particular use or application. The information in this data sheet may not be valid if this product is used in combination with other products or in processes for which it was not designed. Illinois Tool Works Inc. disclaims any liability for consequential or incidental damages of any kind, including lost profits, arising from the sale or use of this product. Ensure you have the most current version of this data sheet by contacting us or reviewing our web site. End of Safety Data Sheet NFPA Instability 0 - HMIS Physical hazards 0 Personal protection B _____________________________________________________________________________________________ Page 8 / 8