3M? Flexible Foam Adhesive PN 08463 05/18/21 ________________________________________________________________________________________________________ Page 1 of 2 Safety Data Sheet Copyright,2021, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 07-4243-7 Version Number: 6.01 Issue Date: 05/18/21 Supercedes Date: 07/30/20 Product identifier 3M? Flexible Foam Adhesive PN 08463 ID Number UPC ID Number UPC 41-0003-6635-5 41-0003-8014-1 41-3701-2158-8 60-4551-1123-1 60-4551-1132-2 60-9800-3647-3 60-9800-4269-5 60-9800-4270-3 60-9800-4271-1 7100045768, 7000045731, 7000045732, 7000045733, 7100241758, 7100241812 Recommended use Automotive, Two Component Flexible Foam Supplier's details MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) This product is a kit or a multipart product which consists of multiple, independently packaged components. A Safety Data Sheet (SDS), Article Information Sheet (AIS), or Article Information Letter (AIL) for each of these components is included. Please do not separate the component documents from this cover page. The document numbers for components of this product are: 07-5569-4, 07-3378-2 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M? Flexible Foam Adhesive PN 08463 05/18/21 ________________________________________________________________________________________________________ Page 2 of 2 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M USA SDSs are available at www.3M.com 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 1 of 12 Safety Data Sheet Copyright,2019,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 07-3378-2 Version Number: 11.03 Issue Date: 10/22/19 Supercedes Date: 04/05/18 SECTION 1: Identification 1.1. Product identifier 3M? Flexible Foam/Part A, 08463 Product Identification Numbers ID Number UPC ID Number UPC LB-K100-0029-6 1.2. Recommended use and restrictions on use Recommended use Automotive, Two Component Flexible Foam 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Serious Eye Damage/Irritation: Category 2A. Skin Corrosion/Irritation: Category 2. Respiratory Sensitizer: Category 1. Skin Sensitizer: Category 1. Specific Target Organ Toxicity (single exposure): Category 3. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 2 of 12 Danger Symbols Exclamation mark | Health Hazard | Pictograms Hazard Statements Causes serious eye irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. May cause respiratory irritation. Causes damage to organs through prolonged or repeated exposure: respiratory system | Precautionary Statements Prevention: Do not breathe dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. In case of inadequate ventilation wear respiratory protection. Wear protective gloves and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Call a POISON CENTER or doctor/physician if you feel unwell. Storage: Store in a well-ventilated place. Keep container tightly closed. Store locked up. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. Supplemental Information: Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. 38% of the mixture consists of ingredients of unknown acute oral toxicity. 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 3 of 12 SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Urethane Prepolymer NJTSRN 04499600-6306 Trade Secret* 30 - 60 Trade Secret * P,P'-Methylenebis(phenyl isocyanate) 101-68-8 10 - 30 Trade Secret * Polymethylene Polyphenylene Isocyanate 9016-87-9 10 - 30 Trade Secret * 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) 26447-40-5 < 15 Trade Secret * Dimethyl Siloxane, Reaction Product With Silica 67762-90-7 1 - 5 Trade Secret * NJTS or NJTSRN: New Jersey Trade Secret Registry Number. *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1. Information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Condition Isocyanates During Combustion Carbon monoxide During Combustion Carbon dioxide During Combustion Hydrogen Cyanide During Combustion 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 4 of 12 Oxides of Nitrogen During Combustion 5.3. Special protective actions for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent) on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent material. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and SDS. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling For industrial/occupational use only. Not for consumer sale or use. Do not use in a confined area with minimal air exchange. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Keep container tightly closed to prevent contamination with water or air. If contamination is suspected, do not reseal container. Store away from heat. Store away from amines. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments P,P'-Methylenebis(phenyl isocyanate) 101-68-8 ACGIH TWA:0.005 ppm P,P'-Methylenebis(phenyl isocyanate) 101-68-8 OSHA CEIL:0.2 mg/m3(0.02 ppm) SILICA, AMORPHOUS 67762-90-7 OSHA TWA concentration:0.8 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 5 of 12 mg/m3;TWA:20 millions of particles/cu. ft. ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Indirect Vented Goggles Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Gloves made from the following material(s) are recommended: Butyl Rubber Neoprene Nitrile Rubber If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an exposure assessment. The following protective clothing material(s) are recommended: Apron ? Butyl rubber Apron - Neoprene Apron ? Nitrile Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Brown Specific Physical Form: Paste 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 6 of 12 Odor Odorless Odor threshold No Data Available pH Not Applicable Melting point Not Applicable Boiling Point >=300 ?F Flash Point >=300 ?F [Test Method:Closed Cup] Evaporation rate Not Applicable Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure <=27 psia [@ 131.0000000000 ?F] [Details:MITS data] Vapor Density 8.50 [Ref Std:AIR=1] Density 1.135 - 1.16 g/ml Specific Gravity 1.135 - 1.16 [Ref Std:WATER=1] Solubility In Water Not Applicable Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity No Data Available Hazardous Air Pollutants 4.34 lb HAPS/lb solids [Test Method:Calculated] Molecular weight No Data Available Volatile Organic Compounds 0.1 % weight [Test Method:calculated per CARB title 2] Volatile Organic Compounds 1 g/l [Test Method:calculated SCAQMD rule 443.1] Percent volatile 0.1 % weight VOC Less H2O & Exempt Solvents 1 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 10.1. Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid Heat 10.5. Incompatible materials Amines Alcohols Water Reaction with water, alcohols, and amines is not hazardous if container can vent to the atmosphere to prevent pressure buildup. 10.6. Hazardous decomposition products Substance Condition None known. Refer to section 5.2 for hazardous decomposition products during combustion. 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 7 of 12 SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest. May cause additional health effects (see below). Skin Contact: Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. Additional Health Effects: Prolonged or repeated exposure may cause target organ effects: Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate, bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure. Additional Information: Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Ingestion No data available; calculated ATE >5,000 mg/kg P,P'-Methylenebis(phenyl isocyanate) Dermal Rabbit LD50 > 5,000 mg/kg Polymethylene Polyphenylene Isocyanate Dermal Rabbit LD50 > 5,000 mg/kg P,P'-Methylenebis(phenyl isocyanate) Inhalation- Dust/Mist (4 hours) Rat LC50 0.368 mg/l 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 8 of 12 P,P'-Methylenebis(phenyl isocyanate) Ingestion Rat LD50 31,600 mg/kg Polymethylene Polyphenylene Isocyanate Inhalation- Dust/Mist (4 hours) Rat LC50 0.368 mg/l Polymethylene Polyphenylene Isocyanate Ingestion Rat LD50 31,600 mg/kg 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) Dermal Rabbit LD50 > 5,000 mg/kg 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) Inhalation- Dust/Mist (4 hours) Rat LC50 0.368 mg/l 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) Ingestion Rat LD50 31,600 mg/kg Dimethyl Siloxane, Reaction Product With Silica Dermal Rabbit LD50 > 5,000 mg/kg Dimethyl Siloxane, Reaction Product With Silica Inhalation- Dust/Mist (4 hours) Rat LC50 > 0.691 mg/l Dimethyl Siloxane, Reaction Product With Silica Ingestion Rat LD50 > 5,110 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value P,P'-Methylenebis(phenyl isocyanate) official classifica tion Irritant Polymethylene Polyphenylene Isocyanate official classifica tion Irritant 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) official classifica tion Irritant Dimethyl Siloxane, Reaction Product With Silica Rabbit No significant irritation Serious Eye Damage/Irritation Name Species Value P,P'-Methylenebis(phenyl isocyanate) official classifica tion Severe irritant Polymethylene Polyphenylene Isocyanate official classifica tion Severe irritant 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) official classifica tion Severe irritant Dimethyl Siloxane, Reaction Product With Silica Rabbit No significant irritation Skin Sensitization Name Species Value P,P'-Methylenebis(phenyl isocyanate) official classifica tion Sensitizing Polymethylene Polyphenylene Isocyanate official classifica tion Sensitizing 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) official classifica tion Sensitizing Dimethyl Siloxane, Reaction Product With Silica Human and animal Not classified Respiratory Sensitization Name Species Value P,P'-Methylenebis(phenyl isocyanate) Human Sensitizing 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 9 of 12 Polymethylene Polyphenylene Isocyanate Human Sensitizing 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) Human Sensitizing Germ Cell Mutagenicity Name Route Value P,P'-Methylenebis(phenyl isocyanate) In Vitro Some positive data exist, but the data are not sufficient for classification Polymethylene Polyphenylene Isocyanate In Vitro Some positive data exist, but the data are not sufficient for classification 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) In Vitro Some positive data exist, but the data are not sufficient for classification Dimethyl Siloxane, Reaction Product With Silica In Vitro Not mutagenic Carcinogenicity Name Route Species Value P,P'-Methylenebis(phenyl isocyanate) Inhalation Rat Some positive data exist, but the data are not sufficient for classification Polymethylene Polyphenylene Isocyanate Inhalation Rat Some positive data exist, but the data are not sufficient for classification 1,1'-METHYLENEBIS(ISOCYANATOBENZENE) Inhalation Rat Some positive data exist, but the data are not sufficient for classification Dimethyl Siloxane, Reaction Product With Silica Not Specified Mouse Some positive data exist, but the data are not sufficient for classification Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test Result Exposure Duration P,P'-Methylenebis(phenyl isocyanate) Inhalation Not classified for development Rat NOAEL 0.004 mg/l during organogenesi s Polymethylene Polyphenylene Isocyanate Inhalation Not classified for development Rat NOAEL 0.004 mg/l during organogenesi s 1,1'- METHYLENEBIS(ISOCYANATOBENZE NE) Inhalation Not classified for development Rat NOAEL 0.004 mg/l during organogenesi s Dimethyl Siloxane, Reaction Product With Silica Ingestion Not classified for female reproduction Rat NOAEL 509 mg/kg/day 1 generation Dimethyl Siloxane, Reaction Product With Silica Ingestion Not classified for male reproduction Rat NOAEL 497 mg/kg/day 1 generation Dimethyl Siloxane, Reaction Product With Silica Ingestion Not classified for development Rat NOAEL 1,350 mg/kg/day during organogenesi s Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration P,P'-Methylenebis(phenyl isocyanate) Inhalation respiratory irritation May cause respiratory irritation official classifica tion NOAEL Not available Polymethylene Polyphenylene Isocyanate Inhalation respiratory irritation May cause respiratory irritation official classifica tion NOAEL Not available 1,1'- METHYLENEBIS(ISOCY ANATOBENZENE) Inhalation respiratory irritation May cause respiratory irritation official classifica tion NOAEL Not available Specific Target Organ Toxicity - repeated exposure 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 10 of 12 Name Route Target Organ(s) Value Species Test Result Exposure Duration P,P'-Methylenebis(phenyl isocyanate) Inhalation respiratory system Causes damage to organs through prolonged or repeated exposure Rat LOAEL 0.004 mg/l 13 weeks Polymethylene Polyphenylene Isocyanate Inhalation respiratory system Causes damage to organs through prolonged or repeated exposure Rat LOAEL 0.004 mg/l 13 weeks 1,1'- METHYLENEBIS(ISOCY ANATOBENZENE) Inhalation respiratory system Causes damage to organs through prolonged or repeated exposure Rat LOAEL 0.004 mg/l 13 weeks Dimethyl Siloxane, Reaction Product With Silica Inhalation respiratory system | silicosis Not classified Human NOAEL Not available occupational exposure Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards Not applicable 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 11 of 12 Health Hazards Respiratory or Skin Sensitization Serious eye damage or eye irritation Skin Corrosion or Irritation Specific target organ toxicity (single or repeated exposure) Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt P,P'-Methylenebis(phenyl isocyanate) 101-68-8 Trade Secret 10 - 30 P,P'-Methylenebis(phenyl isocyanate) (DIISOCYANATES (CERTAIN CHEMICALS ONLY)) 101-68-8 10 - 30 Polymethylene Polyphenylene Isocyanate 9016-87-9 Trade Secret 10 - 30 Polymethylene Polyphenylene Isocyanate (DIISOCYANATES (CERTAIN CHEMICALS ONLY)) 9016-87-9 10 - 30 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 07-3378-2 Version Number: 11.03 Issue Date: 10/22/19 Supercedes Date: 04/05/18 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued.3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE.User is responsible for determining whether the3Mproduct is fit for a particular purpose and suitable for user's method of use or application.Given the variety of factors that can affect the use and application of a3Mproduct, some of 3M? Flexible Foam/Part A, 08463 10/22/19 __________________________________________________________________________________________ Page 12 of 12 which are uniquely within the user's knowledge and control,it is essential that the user evaluate the3Mproduct to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3Mprovides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information,3Mmakes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from3M 3M USA SDSs are available at www.3M.com 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 1 of 11 Safety Data Sheet Copyright,2021, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. Document Group: 07-5569-4 Version Number: 12.01 Issue Date: 05/18/21 Supercedes Date: 07/29/20 SECTION 1: Identification 1.1. Product identifier 3M? Flexible Foam Adhesive PN 08463, Part B Product Identification Numbers ID Number UPC ID Number UPC LB-K100-0029-7 1.2. Recommended use and restrictions on use Recommended use Automotive, Two Component Flexible Foam 1.3. Supplier?s details MANUFACTURER: 3M DIVISION: Automotive Aftermarket ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification The label elements below were prepared in accordance with OSHA Hazard Communication Standard, 29 CFR 1910.1200. This information may be different from the actual product label information for labels regulated by other agencies. 2.1. Hazard classification Serious Eye Damage/Irritation: Category 2A. Skin Corrosion/Irritation: Category 2. Skin Sensitizer: Category 1B. Reproductive Toxicity: Category 1B. Germ Cell Mutagenicity: Category 2. Specific Target Organ Toxicity (single exposure): Category 1. Specific Target Organ Toxicity (repeated exposure): Category 1. 2.2. Label elements Signal word Danger 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 2 of 11 Symbols Exclamation mark | Health Hazard | Pictograms Hazard Statements Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. May damage fertility or the unborn child. Suspected of causing genetic defects. Causes damage to organs: immune system | liver | nervous system | kidney/urinary tract | Causes damage to organs through prolonged or repeated exposure: immune system | liver | Precautionary Statements Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves and eye/face protection. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace. Response: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. IF exposed or concerned: Get medical advice/attention. Get medical advice/attention if you feel unwell. Storage: Store locked up. Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international regulations. 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 3 of 11 51% of the mixture consists of ingredients of unknown acute inhalation toxicity. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Glycerol Poly(Oxyethylene, Oxypropylene) Ether 9082-00-2 30 - 60 Trade Secret * Polypropylene Glycol Glycerol Triether 25791-96-2 30 - 60 Trade Secret * Dimethyl Siloxane, Reaction Product with Silica 67762-90-7 3 - 7 Trade Secret * Diethylene Glycol 111-46-6 1 - 5 Trade Secret * Dipropylene Glycol 25265-71-8 1 - 5 Trade Secret * Water 7732-18-5 1 - 5 Trade Secret * Dibutyltin Dilaurate 77-58-7 < 2 Trade Secret * Triethylenediamine 280-57-9 0.5 - 1.5 Trade Secret * *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: Remove person to fresh air. If you feel unwell, get medical attention. Skin Contact: Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention. Eye Contact: Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medical attention. If Swallowed: Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed No critical symptoms or effects. See Section 11.1, information on toxicological effects. 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. 5.3. Special protective actions for fire-fighters Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 4 of 11 Evacuate area. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Refer to other sections of this SDS for information regarding physical and health hazards, respiratory protection, ventilation, and personal protective equipment. 6.2. Environmental precautions Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or bodies of water. 6.3. Methods and material for containment and cleaning up Contain spill. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Clean up residue with detergent and water. Seal the container. Dispose of collected material as soon as possible in accordance with applicable local/regional/national/international regulations. SECTION 7: Handling and storage 7.1. Precautions for safe handling Do not use in a confined area with minimal air exchange. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Use personal protective equipment (gloves, respirators, etc.) as required. 7.2. Conditions for safe storage including any incompatibilities Store in a well-ventilated place. Store away from heat. Store away from areas where product may come into contact with food or pharmaceuticals. SECTION 8: Exposure controls/personal protection 8.1. Control parameters Occupational exposure limits If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available for the component. Ingredient C.A.S. No. Agency Limit type Additional Comments Diethylene Glycol 111-46-6 AIHA TWA:10 mg/m3 SILICA, AMORPHOUS 67762-90-7 OSHA TWA:20 millions of particles/cu. ft.;TWA concentration:0.8 mg/m3 TIN, ORGANIC COMPOUNDS 77-58-7 ACGIH TWA(as Sn):0.1 mg/m3;STEL(as Sn):0.2 mg/m3 A4: Not class. as human carcin, SKIN TIN, ORGANIC COMPOUNDS 77-58-7 OSHA TWA(as Sn):0.1 mg/m3 ACGIH : American Conference of Governmental Industrial Hygienists AIHA : American Industrial Hygiene Association CMRG : Chemical Manufacturer's Recommended Guidelines OSHA : United States Department of Labor - Occupational Safety and Health Administration TWA: Time-Weighted-Average STEL: Short Term Exposure Limit CEIL: Ceiling 8.2. Exposure controls 8.2.1. Engineering controls 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 5 of 11 Provide appropriate local exhaust ventilation on open containers. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Provide appropriate local exhaust ventilation for cutting, grinding, sanding or machining. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face protection(s) are recommended: Indirect Vented Goggles Skin/hand protection Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Gloves made from the following material(s) are recommended: Neoprene Nitrile Rubber If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an exposure assessment. The following protective clothing material(s) are recommended: Apron - Neoprene Apron ? Nitrile Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator type(s) to reduce inhalation exposure: Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates For questions about suitability for a specific application, consult with your respirator manufacturer. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance Physical state Color Liquid Black Specific Physical Form: Flexible Foam Odor Odorless Odor threshold No Data Available pH Not Applicable Melting point Not Applicable Boiling Point Not Applicable Flash Point >=250 ?F [Test Method:Tagliabue Closed Cup] Evaporation rate Not Applicable Flammability (solid, gas) Not Applicable Flammable Limits(LEL) No Data Available Flammable Limits(UEL) No Data Available Vapor Pressure <=27 psia [@ 131.0000000000 ?F] [Details:MITS data] 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 6 of 11 Vapor Density Not Applicable Density 0.960 - 1.030 g/ml Specific Gravity 0.960 - 1.030 [Ref Std:WATER=1] Solubility in Water Moderate Solubility- non-water No Data Available Partition coefficient: n-octanol/ water No Data Available Autoignition temperature No Data Available Decomposition temperature No Data Available Viscosity No Data Available Hazardous Air Pollutants 0.0008 lb HAPS/lb solids [Test Method:Calculated] Molecular weight No Data Available Volatile Organic Compounds 45 g/l [Test Method:calculated SCAQMD rule 443.1] Volatile Organic Compounds 1.9 % weight [Test Method:calculated per CARB title 2] Percent volatile 26.3 % weight VOC Less H2O & Exempt Solvents 57 g/l [Test Method:calculated SCAQMD rule 443.1] SECTION 10: Stability and reactivity 10.1. Reactivity This material is considered to be non reactive under normal use conditions. 10.2. Chemical stability Stable. 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials None known. 10.6. Hazardous decomposition products Substance Condition Carbon monoxide Not Specified Carbon dioxide Not Specified Toxic Vapor, Gas, Particulate Not Specified SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole. 11.1. Information on Toxicological effects Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 7 of 11 Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and throat pain. Skin Contact: Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, dryness, cracking, blistering, and pain. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Eye Contact: Severe Eye Irritation: Signs/symptoms may include significant redness, swelling, pain, tearing, cloudy appearance of the cornea, and impaired vision. Ingestion: Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea. May cause additional health effects (see below). Additional Health Effects: Single exposure may cause target organ effects: Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice. Immunological Effects: Signs/symptoms may include alterations in the number of circulating immune cells, allergic skin and /or respiratory reaction, and changes in immune function. Neurological Effects: Signs/symptoms may include personality changes, lack of coordination, sensory loss, tingling or numbness of the extremities, weakness, tremors, and/or changes in blood pressure and heart rate. Kidney/Bladder Effects: Signs/symptoms may include changes in urine production, abdominal or lower back pain, increased protein in urine, increased blood urea nitrogen (BUN), blood in urine, and painful urination. Prolonged or repeated exposure may cause target organ effects: Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and jaundice. Immunological Effects: Signs/symptoms may include alterations in the number of circulating immune cells, allergic skin and /or respiratory reaction, and changes in immune function. Reproductive/Developmental Toxicity: Contains a chemical or chemicals which can cause birth defects or other reproductive harm. Genotoxicity: Genotoxicity and Mutagenicity: May interact with genetic material and possibly alter gene expression. Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification. Acute Toxicity Name Route Species Value Overall product Dermal No data available; calculated ATE >5,000 mg/kg Overall product Inhalation- Dust/Mist(4 hr) No data available; calculated ATE >12.5 mg/l Overall product Ingestion No data available; calculated ATE >5,000 mg/kg Glycerol Poly(Oxyethylene, Oxypropylene) Ether Dermal Rabbit LD50 > 5,000 mg/kg 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 8 of 11 Glycerol Poly(Oxyethylene, Oxypropylene) Ether Ingestion Rat LD50 > 10,000 mg/kg Polypropylene Glycol Glycerol Triether Dermal Rat LD50 > 2,000 mg/kg Polypropylene Glycol Glycerol Triether Inhalation- Dust/Mist (4 hours) Rat LC50 > 50 mg/l Polypropylene Glycol Glycerol Triether Ingestion Rat LD50 4,600 mg/kg Dimethyl Siloxane, Reaction Product with Silica Dermal Rabbit LD50 > 5,000 mg/kg Dimethyl Siloxane, Reaction Product with Silica Inhalation- Dust/Mist (4 hours) Rat LC50 > 0.691 mg/l Dimethyl Siloxane, Reaction Product with Silica Ingestion Rat LD50 > 5,110 mg/kg Dipropylene Glycol Dermal Rabbit LD50 > 5,010 mg/kg Dipropylene Glycol Inhalation- Dust/Mist (4 hours) Rat LC50 > 2.34 mg/l Dipropylene Glycol Ingestion Rat LD50 > 14,800 mg/kg Dibutyltin Dilaurate Dermal Rat LD50 > 2,000 mg/kg Dibutyltin Dilaurate Ingestion Rat LD50 1,290 mg/kg Diethylene Glycol Ingestion Human LD50 estimated to be 300 - 2,000 mg/kg Diethylene Glycol Dermal Rabbit LD50 13,300 mg/kg Diethylene Glycol Inhalation- Dust/Mist (4 hours) Rat LC50 > 4.6 mg/l Triethylenediamine Dermal Rabbit LD50 > 3,200 mg/kg Triethylenediamine Inhalation- Dust/Mist (4 hours) Rat LC50 > 5.05 mg/l Triethylenediamine Ingestion Rat LD50 1,870 mg/kg ATE = acute toxicity estimate Skin Corrosion/Irritation Name Species Value Polypropylene Glycol Glycerol Triether Rabbit No significant irritation Dimethyl Siloxane, Reaction Product with Silica Rabbit No significant irritation Dipropylene Glycol Rabbit No significant irritation Dibutyltin Dilaurate Rabbit Corrosive Diethylene Glycol Rabbit No significant irritation Triethylenediamine Rabbit Mild irritant Serious Eye Damage/Irritation Name Species Value Polypropylene Glycol Glycerol Triether Rabbit Mild irritant Dimethyl Siloxane, Reaction Product with Silica Rabbit No significant irritation Dipropylene Glycol Rabbit No significant irritation Dibutyltin Dilaurate Rabbit Corrosive Diethylene Glycol Rabbit Mild irritant Triethylenediamine Rabbit Corrosive Skin Sensitization Name Species Value Dimethyl Siloxane, Reaction Product with Silica Human and animal Not classified Dipropylene Glycol Guinea pig Not classified Dibutyltin Dilaurate Guinea pig Sensitizing Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification. 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 9 of 11 Germ Cell Mutagenicity Name Route Value Dimethyl Siloxane, Reaction Product with Silica In Vitro Not mutagenic Dipropylene Glycol In Vitro Not mutagenic Dipropylene Glycol In vivo Not mutagenic Dibutyltin Dilaurate In Vitro Some positive data exist, but the data are not sufficient for classification Dibutyltin Dilaurate In vivo Mutagenic Carcinogenicity Name Route Species Value Dimethyl Siloxane, Reaction Product with Silica Not Specified Mouse Some positive data exist, but the data are not sufficient for classification Dipropylene Glycol Ingestion Multiple animal species Not carcinogenic Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test Result Exposure Duration Dimethyl Siloxane, Reaction Product with Silica Ingestion Not classified for female reproduction Rat NOAEL 509 mg/kg/day 1 generation Dimethyl Siloxane, Reaction Product with Silica Ingestion Not classified for male reproduction Rat NOAEL 497 mg/kg/day 1 generation Dimethyl Siloxane, Reaction Product with Silica Ingestion Not classified for development Rat NOAEL 1,350 mg/kg/day during organogenesi s Dipropylene Glycol Ingestion Not classified for development Rat NOAEL 5,000 mg/kg/day during organogenesi s Dibutyltin Dilaurate Ingestion Toxic to female reproduction Rat NOAEL 2 mg/kg/day premating into lactation Dibutyltin Dilaurate Ingestion Toxic to development Rat NOAEL 2.5 mg/kg/day during gestation Target Organ(s) Specific Target Organ Toxicity - single exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Dibutyltin Dilaurate Ingestion immune system Causes damage to organs Rat LOAEL 5 mg/kg Diethylene Glycol Ingestion liver | nervous system | kidney and/or bladder Causes damage to organs Human NOAEL Not available poisoning and/or abuse Diethylene Glycol Ingestion central nervous system depression May cause drowsiness or dizziness Human NOAEL Not available poisoning and/or abuse Specific Target Organ Toxicity - repeated exposure Name Route Target Organ(s) Value Species Test Result Exposure Duration Dimethyl Siloxane, Reaction Product with Silica Inhalation respiratory system | silicosis Not classified Human NOAEL Not available occupational exposure Dipropylene Glycol Ingestion respiratory system Some positive data exist, but the data are not sufficient for classification Rat NOAEL 470 mg/kg/day 105 weeks Dipropylene Glycol Ingestion heart Not classified Rat NOAEL 470 mg/kg/day 105 weeks Dipropylene Glycol Ingestion endocrine system | liver Not classified Rat NOAEL 3,040 105 weeks 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 10 of 11 mg/kg/day Dipropylene Glycol Ingestion kidney and/or bladder Not classified Rat NOAEL 115 mg/kg/day 105 weeks Dipropylene Glycol Ingestion skin | bone, teeth, nails, and/or hair | hematopoietic system | immune system | nervous system | vascular system Not classified Rat NOAEL 3,040 mg/kg/day 105 weeks Dibutyltin Dilaurate Ingestion liver Causes damage to organs through prolonged or repeated exposure Rat NOAEL 2 mg/kg/day 2 weeks Dibutyltin Dilaurate Ingestion immune system Causes damage to organs through prolonged or repeated exposure Rat NOAEL 0.3 mg/kg/day 28 days Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components. SECTION 12: Ecological information Ecotoxicological information Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material and/or its components. Chemical fate information Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material and/or its components. SECTION 13: Disposal considerations 13.1. Disposal methods Dispose of contents/ container in accordance with the local/regional/national/international regulations. Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal facilities. SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1. US Federal Regulations Contact 3M for more information. EPCRA 311/312 Hazard Classifications: Physical Hazards 3M? Flexible Foam Adhesive PN 08463, Part B 05/18/21 __________________________________________________________________________________________ Page 11 of 11 Not applicable Health Hazards Germ cell mutagenicity Reproductive toxicity Respiratory or Skin Sensitization Serious eye damage or eye irritation Skin Corrosion or Irritation Specific target organ toxicity (single or repeated exposure) 15.2. State Regulations Contact 3M for more information. 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. All required components of this product are listed on the active portion of the TSCA Inventory. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: Other information NFPA Hazard Classification Health: 2 Flammability: 1 Instability: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Document Group: 07-5569-4 Version Number: 12.01 Issue Date: 05/18/21 Supercedes Date: 07/29/20 DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M. 3M USA SDSs are available at www.3M.com