SAFETY DATA SHEET Revision date 03/23/2023 Revision Number 2 1. Identification Product identifier Product Name AAT Cutting Compound Other means of identification Product Code(s) 501 Synonyms None Recommended use of the chemical and restrictions on use Recommended use Automotive Care Products Restrictions on use No information available Details of the supplier of the safety data sheet Emergency telephone number Emergency Telephone CHEMTREC 1-800-424-9300 (US and Canada) 2. Hazard(s) identification Classification Acute toxicity - Oral Category 4 Serious eye damage/eye irritation Category 2 Label elements Warning Hazard statements Harmful if swallowed Causes serious eye irritation Combustible liquid Manufacturer Address 3D International 20724 Centre Pointe Pkwy #1 Santa Clarita, CA 91350 Flammable liquids Category 4 Appearance cream Physical state Liquid Odor Fruity _____________________________________________________________________________________________ Page 1 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Keep away from flames and hot surfaces. - No smoking Wear protective gloves, eye protection and face protection Precautionary Statements - Response Eyes IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice and attention Ingestion IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell Rinse mouth Fire In case of fire: Use CO2, dry chemical, or foam to extinguish Precautionary Statements - Storage Keep out of reach of children Store in a well-ventilated place. Keep cool Store locked up Precautionary Statements - Disposal Dispose of contents and container in accordance with local, regional, national, and international regulations as applicable Other information May be harmful in contact with skin. 3. Composition/information on ingredients Substance Not applicable. Mixture Chemical name CAS No Weight-% Hazardous Material Information Review Act registry number (HMIRA registry #) Date HMIRA filed and date exemption granted (if applicable) Aluminum oxide 1344-28-1 10 - <25% - - Distillates (petroleum), hydrotreated light 64742-47-8 10 - <25% - - Components listed, if any, are present above their levels of disclosure. The exact percentage/concentration is withheld as a trade secret in accordance with 29 CFR 1910.1200. 4. First-aid measures Description of first aid measures General advice Show this safety data sheet to the doctor in attendance. _____________________________________________________________________________________________ Page 2 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 Inhalation Remove to fresh air. Eye contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Skin contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Ingestion Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Call a physician. Self-protection of the first aider Remove all sources of ignition. Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Wear personal protective clothing (see section 8). Avoid contact with skin, eyes or clothing. Most important symptoms and effects, both acute and delayed Symptoms May cause redness and tearing of the eyes. Burning sensation. Indication of any immediate medical attention and special treatment needed Note to physicians Treat symptomatically. 5. Fire-fighting measures Suitable Extinguishing Media Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam. Large Fire CAUTION: Use of water spray when fighting fire may be inefficient. Unsuitable extinguishing media Do not scatter spilled material with high pressure water streams. Specific hazards arising from the chemical Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray. Explosion data Sensitivity to mechanical impact None. Sensitivity to static discharge Yes. Special protective equipment and precautions for fire-fighters Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Personal precautions Evacuate personnel to safe areas. Use personal protective equipment as required. See section 8 for more information. Take precautionary measures against static discharges. Do not touch or walk through spilled material. Avoid contact with skin, eyes or clothing. Other information Refer to protective measures listed in Sections 7 and 8. Methods and material for containment and cleaning up Methods for containment Stop leak if you can do it without risk. Do not touch or walk through spilled material. Dike far ahead of liquid spill for later disposal. Methods for cleaning up Take precautionary measures against static discharges. Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled containers. _____________________________________________________________________________________________ Page 3 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 7. Handling and storage Precautions for safe handling Advice on safe handling Use personal protection equipment. Do not breathe vapor or mist. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Use with local exhaust ventilation. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labeled containers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Keep out of the reach of children. 8. Exposure controls/personal protection Control parameters Exposure Limits Chemical name ACGIH TLV OSHA PEL NIOSH Aluminum oxide 1344-28-1 TWA: 1 mg/m3 respirable particulate matter TWA: 15 mg/m3 total dust TWA: 5 mg/m3 respirable fraction (vacated) TWA: 10 mg/m3 total dust (vacated) TWA: 5 mg/m3 respirable fraction - Chemical name Alberta British Columbia Ontario Quebec Aluminum oxide 1344-28-1 TWA: 10 mg/m3 TWA: 1.0 mg/m3 TWA: 1 mg/m3 TWA: 10 mg/m3 Appropriate engineering controls Engineering controls Showers Eyewash stations Ventilation systems. Individual protection measures, such as personal protective equipment Eye/face protection Tight sealing safety goggles. Hand protection Wear suitable gloves. Skin and body protection Wear suitable protective clothing. Respiratory protection No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. General hygiene considerations Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. _____________________________________________________________________________________________ Page 4 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 Avoid contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection. 9. Physical and chemical properties Information on basic physical and chemical properties Physical state Liquid Appearance cream Color white Odor Fruity Odor threshold No information available Other information Explosive properties No information available Oxidizing properties No information available Softening point No information available Molecular weight No information available VOC content No information available Liquid Density No information available Bulk density No information available 10. Stability and reactivity Reactivity No information available. Chemical stability Stable under normal conditions. Possibility of hazardous reactions None under normal processing. Conditions to avoid Heat, flames and sparks. Incompatible materials None known based on information supplied. Hazardous decomposition products None known based on information supplied. 11. Toxicological information Information on likely routes of exposure Property Values Remarks ? Method pH 9 - 11 None known Melting point / freezing point No data available None known Initial boiling point and boiling range No data available None known Flash point No data available None known Evaporation rate No data available None known Flammability No data available None known Flammability Limit in Air None known Upper flammability or explosive limits No data available Lower flammability or explosive limits No data available Vapor pressure No data available None known Relative vapor density No data available None known Relative density ~1.09 None known Water solubility No data available None known Solubility(ies) No data available None known Partition coefficient No data available None known Autoignition temperature No data available None known Decomposition temperature No data available None known Kinematic viscosity 30 None known Dynamic viscosity No data available None known _____________________________________________________________________________________________ Page 5 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 Product Information Inhalation Specific test data for the substance or mixture is not available. May cause irritation of respiratory tract. Eye contact Specific test data for the substance or mixture is not available. Causes serious eye irritation. (based on components). May cause redness, itching, and pain. Skin contact Specific test data for the substance or mixture is not available. May cause irritation. Prolonged contact may cause redness and irritation. May be harmful in contact with skin. Ingestion Specific test data for the substance or mixture is not available. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Harmful if swallowed. (based on components). Symptoms related to the physical, chemical and toxicological characteristics Symptoms May cause redness and tearing of the eyes. Acute toxicity Numerical measures of toxicity The following values are calculated based on chapter 3.1 of the GHS document Component Information Chemical name Oral LD50 Dermal LD50 Inhalation LC50 Aluminum oxide 1344-28-1 > 5000 mg/kg ( Rat ) - - Distillates (petroleum), hydrotreated light 64742-47-8 > 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) > 5.2 mg/L ( Rat ) 4 h Delayed and immediate effects as well as chronic effects from short and long-term exposure Skin corrosion/irritation May cause skin irritation. Serious eye damage/eye irritation Classification based on data available for ingredients. Causes serious eye irritation. Respiratory or skin sensitization No information available. Germ cell mutagenicity No information available. Carcinogenicity No information available. Reproductive toxicity No information available. STOT - single exposure No information available. STOT - repeated exposure No information available. Aspiration hazard No information available. _____________________________________________________________________________________________ Page 6 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 12. Ecological information Ecotoxicity Chemical name Algae/aquatic plants Fish Toxicity to microorganisms Crustacea Distillates (petroleum), hydrotreated light 64742-47-8 - LC50: =45mg/L (96h, Pimephales promelas) LC50: =2.2mg/L (96h, Lepomis macrochirus) LC50: =2.4mg/L (96h, Oncorhynchus mykiss) - - Persistence and degradability No information available. Bioaccumulation There is no data for this product. Mobility in soil No information available. Other adverse effects No information available. 13. Disposal considerations Disposal methods Waste from residues/unused products Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation. Contaminated packaging Do not reuse empty containers. 14. Transport information DOT Not regulated 15. Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture International Regulations The Montreal Protocol on Substances that Deplete the Ozone Layer Not applicable The Stockholm Convention on Persistent Organic Pollutants Not applicable _____________________________________________________________________________________________ Page 7 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 The Rotterdam Convention Not applicable International Inventories TSCA Contact supplier for inventory compliance status. Chemical name CAS No US TSCA Inventory listing US TSCA inactive/active designation Water 7732-18-5 Present Active Aluminum oxide 1344-28-1 Present Active Distillates (petroleum), hydrotreated light 64742-47-8 Present Active Oleic Acid 112-80-1 Present Active White Mineral Oil 8042-47-5 Present Active Undecyl glucoside 98283-67-1 - Unknown * sodium hydroxide 1310-73-2 Present Active *Contact supplier for details. One or more substances in this product are either not listed on the US TSCA inventory, listed on the confidential US TSCA inventory or are otherwise exempted from inventory listing requirements DSL/NDSL Contact supplier for inventory compliance status. EINECS/ELINCS Contact supplier for inventory compliance status. ENCS Contact supplier for inventory compliance status. IECSC Contact supplier for inventory compliance status. KECL Contact supplier for inventory compliance status. PICCS Contact supplier for inventory compliance status. AIIC Contact supplier for inventory compliance status. NZIoC Contact supplier for inventory compliance status. Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AIIC - Australian Inventory of Industrial Chemicals NZIoC - New Zealand Inventory of Chemicals US Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. Chemical name SARA 313 - Threshold Values % Aluminum oxide - 1344-28-1 1.0 SARA 311/312 Hazard Categories Should this product meet EPCRA 311/312 Tier reporting criteria at 40 CFR 370, refer to Section 2 of this SDS for appropriate classifications. CWA (Clean Water Act) This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and _____________________________________________________________________________________________ Page 8 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. US State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know Regulations Chemical name New Jersey Massachusetts Pennsylvania Water 7732-18-5 - - X Aluminum oxide 1344-28-1 X X X Oleic Acid 112-80-1 - - X sodium hydroxide 1310-73-2 X X X U.S. EPA Label Information EPA Pesticide Registration Number Not applicable 16. Other information Key or legend to abbreviations and acronyms used in the safety data sheet Legend Section 8: Exposure controls/personal protection Key literature references and sources for data used to compile the SDS Agency for Toxic Substances and Disease Registry (ATSDR) U.S. Environmental Protection Agency ChemView Database European Food Safety Authority (EFSA) EPA (Environmental Protection Agency) Acute Exposure Guideline Level(s) (AEGL(s)) U.S. Environmental Protection Agency Federal Insecticide, Fungicide, and Rodenticide Act U.S. Environmental Protection Agency High Production Volume Chemicals Food Research Journal Hazardous Substance Database International Uniform Chemical Information Database (IUCLID) National Institute of Technology and Evaluation (NITE) Australia National Industrial Chemicals Notification and Assessment Scheme (NICNAS) NIOSH (National Institute for Occupational Safety and Health) National Library of Medicine's ChemID Plus (NLM CIP) National Library of Medicine?s PubMed database (NLM PUBMED) National Toxicology Program (NTP) New Zealand's Chemical Classification and Information Database (CCID) Organization for Economic Co-operation and Development Environment, Health, and Safety Publications Organization for Economic Co-operation and Development High Production Volume Chemicals Program Organization for Economic Co-operation and Development Screening Information Data Set World Health Organization Revision date 03/23/2023 Revision Note No information available. Disclaimer NFPA Health hazards 2 Flammability 2 Instability 0 Special hazards - HMIS Health hazards 2 Flammability 2 Physical hazards 0 Personal protection X TWA TWA (time-weighted average) STEL STEL (Short Term Exposure Limit) Ceiling Maximum limit value * Skin designation _____________________________________________________________________________________________ Page 9 / 10 _____________________________________________________________________________________________ 501 - AAT Cutting Compound Revision date 03/23/2023 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. End of Safety Data Sheet _____________________________________________________________________________________________ Page 10 / 10