SDS Repository

sds

Collection
3DI
Description
520 ACA Finishing Polish
Tags
Search Tag
Filename
520FINISHINGPOLISHSDSUS.pdf
Source
 
Full Text
SAFETY DATA SHEET Revision date 02/27/2023 Revision Number 1 1. Identification Product identifier Product Name ACA Finishing Polish Other means of identification Product Code(s) 520 Synonyms None Recommended use of the chemical and restrictions on use Recommended use Automotive Care Products Restrictions on use No information available Details of the supplier of the safety data sheet Emergency telephone number Emergency Telephone CHEMTREC 1-800-424-9300 (US and Canada) 2. Hazard(s) identification Classification Acute toxicity - Oral Category 4 Serious eye damage/eye irritation Category 2B Label elements Warning Hazard statements Harmful if swallowed Causes eye irritation Combustible liquid Manufacturer Address 3D International 20724 Centre Pointe Pkwy #1 Santa Clarita, CA 91350 Flammable liquids Category 4 Appearance Creamy liquid Physical state Liquid Odor Fruity _____________________________________________________________________________________________ Page 1 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Keep away from flames and hot surfaces. - No smoking Wear protective gloves, eye protection and face protection Precautionary Statements - Response Eyes IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice and attention Ingestion IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell Rinse mouth Fire In case of fire: Use CO2, dry chemical, or foam to extinguish Precautionary Statements - Storage Store in a well-ventilated place. Keep cool Precautionary Statements - Disposal Dispose of contents and container to an approved waste disposal plant Other information May be harmful in contact with skin. 3. Composition/information on ingredients Substance Not applicable. Mixture Chemical name CAS No Weight-% Hazardous Material Information Review Act registry number (HMIRA registry #) Date HMIRA filed and date exemption granted (if applicable) Distillates (petroleum), hydrotreated light 64742-47-8 25 - <50% - - Aluminum oxide 1344-28-1 10 - <25% - - Propane-1,2-diol 57-55-6 1 - <2.5% - - Components listed, if any, are present above their levels of disclosure. The exact percentage/concentration is withheld as a trade secret in accordance with 29 CFR 1910.1200. 4. First-aid measures Description of first aid measures General advice Show this safety data sheet to the doctor in attendance. Inhalation Remove to fresh air. _____________________________________________________________________________________________ Page 2 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 Eye contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Skin contact Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Ingestion Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Call a physician. Self-protection of the first aider Remove all sources of ignition. Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. Wear personal protective clothing (see section 8). Most important symptoms and effects, both acute and delayed Symptoms No information available. Indication of any immediate medical attention and special treatment needed Note to physicians Treat symptomatically. 5. Fire-fighting measures Suitable Extinguishing Media Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam. Large Fire CAUTION: Use of water spray when fighting fire may be inefficient. Unsuitable extinguishing media Do not scatter spilled material with high pressure water streams. Specific hazards arising from the chemical Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray. Explosion data Sensitivity to mechanical impact None. Sensitivity to static discharge Yes. Special protective equipment and precautions for fire-fighters Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Personal precautions Evacuate personnel to safe areas. Use personal protective equipment as required. See section 8 for more information. Take precautionary measures against static discharges. Do not touch or walk through spilled material. Avoid contact with skin, eyes or clothing. Other information Refer to protective measures listed in Sections 7 and 8. Methods and material for containment and cleaning up Methods for containment Stop leak if you can do it without risk. Do not touch or walk through spilled material. Dike far ahead of liquid spill for later disposal. Methods for cleaning up Take precautionary measures against static discharges. Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled containers. _____________________________________________________________________________________________ Page 3 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 7. Handling and storage Precautions for safe handling Advice on safe handling Use personal protection equipment. Do not breathe vapor or mist. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges. Use with local exhaust ventilation. Handle in accordance with good industrial hygiene and safety practice. Conditions for safe storage, including any incompatibilities Storage Conditions Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labeled containers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Keep out of the reach of children. 8. Exposure controls/personal protection Control parameters Exposure Limits Chemical name ACGIH TLV OSHA PEL NIOSH Aluminum oxide 1344-28-1 TWA: 1 mg/m3 respirable particulate matter TWA: 15 mg/m3 total dust TWA: 5 mg/m3 respirable fraction (vacated) TWA: 10 mg/m3 total dust (vacated) TWA: 5 mg/m3 respirable fraction - Chemical name Alberta British Columbia Ontario Quebec Aluminum oxide 1344-28-1 TWA: 10 mg/m3 TWA: 1.0 mg/m3 TWA: 1 mg/m3 TWA: 10 mg/m3 Propane-1,2-diol 57-55-6 - - TWA: 10 mg/m3 TWA: 50 ppm TWA: 155 mg/m3 - Appropriate engineering controls Engineering controls Showers Eyewash stations Ventilation systems. Individual protection measures, such as personal protective equipment Eye/face protection Tight sealing safety goggles. Hand protection No special protective equipment required. Skin and body protection No special protective equipment required. Respiratory protection No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. General hygiene considerations Do not eat, drink or smoke when using this product. Contaminated work. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and _____________________________________________________________________________________________ Page 4 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 immediately after handling the product. Avoid contact with skin, eyes or clothing. 9. Physical and chemical properties Information on basic physical and chemical properties Physical state Liquid Appearance Creamy liquid Color white Odor Fruity Odor threshold No information available Other information Explosive properties No information available Oxidizing properties No information available Softening point No information available Molecular weight No information available VOC content No information available Liquid Density No information available Bulk density No information available 10. Stability and reactivity Reactivity No information available. Chemical stability Stable under normal conditions. Possibility of hazardous reactions None under normal processing. Conditions to avoid Heat, flames and sparks. Incompatible materials None known based on information supplied. Hazardous decomposition products None known based on information supplied. 11. Toxicological information Information on likely routes of exposure Property Values Remarks ? Method pH 9 - 11 None known Melting point / freezing point No data available None known Initial boiling point and boiling range No data available None known Flash point No data available None known Evaporation rate No data available None known Flammability No data available None known Flammability Limit in Air None known Upper flammability or explosive limits No data available Lower flammability or explosive limits No data available Vapor pressure No data available None known Relative vapor density No data available None known Relative density ~ 0.96 None known Water solubility Soluble in water None known Solubility(ies) No data available None known Partition coefficient No data available None known Autoignition temperature No data available None known Decomposition temperature No data available None known Kinematic viscosity > 30.5 None known Dynamic viscosity No data available None known _____________________________________________________________________________________________ Page 5 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 Product Information Inhalation Specific test data for the substance or mixture is not available. Eye contact Specific test data for the substance or mixture is not available. Causes eye irritation. May cause redness, itching, and pain. Skin contact May be harmful in contact with skin. Ingestion Specific test data for the substance or mixture is not available. Harmful if swallowed. (based on components). Symptoms related to the physical, chemical and toxicological characteristics Symptoms May cause redness and tearing of the eyes. Acute toxicity Numerical measures of toxicity The following values are calculated based on chapter 3.1 of the GHS document ATEmix (dermal) 3,976.40 mg/kg Component Information Chemical name Oral LD50 Dermal LD50 Inhalation LC50 Distillates (petroleum), hydrotreated light 64742-47-8 > 5000 mg/kg ( Rat ) > 2000 mg/kg ( Rabbit ) > 5.2 mg/L ( Rat ) 4 h Aluminum oxide 1344-28-1 > 5000 mg/kg ( Rat ) - - Propane-1,2-diol 57-55-6 = 20 g/kg ( Rat ) = 20800 mg/kg ( Rabbit ) - Delayed and immediate effects as well as chronic effects from short and long-term exposure Skin corrosion/irritation May cause skin irritation. Serious eye damage/eye irritation Classification based on data available for ingredients. Causes eye irritation. Respiratory or skin sensitization No information available. Germ cell mutagenicity No information available. Carcinogenicity No information available. Reproductive toxicity No information available. STOT - single exposure No information available. STOT - repeated exposure No information available. Aspiration hazard No information available. _____________________________________________________________________________________________ Page 6 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 12. Ecological information Ecotoxicity Chemical name Algae/aquatic plants Fish Toxicity to microorganisms Crustacea Distillates (petroleum), hydrotreated light 64742-47-8 - LC50: =45mg/L (96h, Pimephales promelas) LC50: =2.2mg/L (96h, Lepomis macrochirus) LC50: =2.4mg/L (96h, Oncorhynchus mykiss) - - Propane-1,2-diol 57-55-6 EC50: =19000mg/L (96h, Pseudokirchneriella subcapitata) LC50: =51600mg/L (96h, Oncorhynchus mykiss) LC50: 41 - 47mL/L (96h, Oncorhynchus mykiss) LC50: =51400mg/L (96h, Pimephales promelas) LC50: =710mg/L (96h, Pimephales promelas) - EC50: >1000mg/L (48h, Daphnia magna) Persistence and degradability No information available. Bioaccumulation Component Information Chemical name Partition coefficient Propane-1,2-diol 57-55-6 -1.07 Mobility in soil No information available. Other adverse effects No information available. 13. Disposal considerations Disposal methods Waste from residues/unused products Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation. Contaminated packaging Do not reuse empty containers. 14. Transport information DOT Not regulated _____________________________________________________________________________________________ Page 7 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 15. Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture International Regulations The Montreal Protocol on Substances that Deplete the Ozone Layer Not applicable The Stockholm Convention on Persistent Organic Pollutants Not applicable The Rotterdam Convention Not applicable International Inventories TSCA Contact supplier for inventory compliance status. Chemical name CAS No US TSCA Inventory listing US TSCA inactive/active designation Distillates (petroleum), hydrotreated light 64742-47-8 Present Active Water 7732-18-5 Present Active White Mineral Oil 8042-47-5 Present Active Aluminum oxide 1344-28-1 Present Active Polyoxyehtylene Undecyl Ether 34398-01-1 Present Active Propane-1,2-diol 57-55-6 Present Active Linalool 78-70-6 Present Active (R)-p-mentha-1,8-diene 5989-27-5 Present Active DSL/NDSL Contact supplier for inventory compliance status. EINECS/ELINCS Contact supplier for inventory compliance status. ENCS Contact supplier for inventory compliance status. IECSC Contact supplier for inventory compliance status. KECL Contact supplier for inventory compliance status. PICCS Contact supplier for inventory compliance status. AIIC Contact supplier for inventory compliance status. NZIoC Contact supplier for inventory compliance status. Legend: TSCA - United States Toxic Substances Control Act Section 8(b) Inventory DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances ENCS - Japan Existing and New Chemical Substances IECSC - China Inventory of Existing Chemical Substances KECL - Korean Existing and Evaluated Chemical Substances PICCS - Philippines Inventory of Chemicals and Chemical Substances AIIC - Australian Inventory of Industrial Chemicals NZIoC - New Zealand Inventory of Chemicals US Federal Regulations SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372. Chemical name SARA 313 - Threshold Values % Aluminum oxide - 1344-28-1 1.0 SARA 311/312 Hazard Categories _____________________________________________________________________________________________ Page 8 / 10 _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 Should this product meet EPCRA 311/312 Tier reporting criteria at 40 CFR 370, refer to Section 2 of this SDS for appropriate classifications. CWA (Clean Water Act) This product does not contain any substances regulated as pollutants pursuant to the Clean Water Act (40 CFR 122.21 and 40 CFR 122.42). CERCLA This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material. US State Regulations California Proposition 65 This product does not contain any Proposition 65 chemicals. U.S. State Right-to-Know Regulations Chemical name New Jersey Massachusetts Pennsylvania Water 7732-18-5 - - X Aluminum oxide 1344-28-1 X X X Propane-1,2-diol 57-55-6 X - X (R)-p-mentha-1,8-diene 5989-27-5 X - - U.S. EPA Label Information EPA Pesticide Registration Number Not applicable 16. Other information Key or legend to abbreviations and acronyms used in the safety data sheet Legend Section 8: Exposure controls/personal protection Key literature references and sources for data used to compile the SDS Agency for Toxic Substances and Disease Registry (ATSDR) U.S. Environmental Protection Agency ChemView Database European Food Safety Authority (EFSA) EPA (Environmental Protection Agency) Acute Exposure Guideline Level(s) (AEGL(s)) U.S. Environmental Protection Agency Federal Insecticide, Fungicide, and Rodenticide Act U.S. Environmental Protection Agency High Production Volume Chemicals Food Research Journal Hazardous Substance Database International Uniform Chemical Information Database (IUCLID) National Institute of Technology and Evaluation (NITE) Australia National Industrial Chemicals Notification and Assessment Scheme (NICNAS) NIOSH (National Institute for Occupational Safety and Health) National Library of Medicine's ChemID Plus (NLM CIP) National Library of Medicine?s PubMed database (NLM PUBMED) National Toxicology Program (NTP) NFPA Health hazards 1 Flammability 2 Instability 0 Special hazards - HMIS Health hazards 1 Flammability 2 Physical hazards 0 Personal protection X TWA TWA (time-weighted average) STEL STEL (Short Term Exposure Limit) Ceiling Maximum limit value * _____________________________________________________________________________________________ Page 9 / 10 Skin designation _____________________________________________________________________________________________ 520 - ACA Finishing Polish Revision date 02/27/2023 New Zealand's Chemical Classification and Information Database (CCID) Organization for Economic Co-operation and Development Environment, Health, and Safety Publications Organization for Economic Co-operation and Development High Production Volume Chemicals Program Organization for Economic Co-operation and Development Screening Information Data Set World Health Organization Revision date 02/27/2023 Revision Note No information available. Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. End of Safety Data Sheet _____________________________________________________________________________________________ Page 10 / 10